Sulfur hexafluoride (SF6) is widely employed in electrical power systems due to its superior insulating properties. However, prolonged use or equipment failure may cause SF6 gas leaks, leading to environmental contamination. While numerous 2-D materials have been proposed by academics for detecting SF6 decomposition gas, investigations into SF6 gas adsorption and the ability to modulate adsorption performance have been relatively limited. Given the strong adsorption of SF6 gas and the tunability of adsorption performance, this article proposes a methodology for achieving distinct adsorption properties by configuring solvents with varying dielectric constants based on CuO-doped SnSe (SnSe-CuO) monolayer. The SnSe-CuO monolayer is used as an adsorbent for SF6 leakage in solvents with different relative dielectric constants. The methodology employs computational analysis to obtain the solvent dielectric constant corresponding to the required adsorption energy from the fit function, which can serve as a solid theoretical basis for future chemisorption studies.
The emission of toxic gases such as NO2, NO, SO2, and CO from industrial activities, transportation, and energy production poses significant threats to the environment and public health. Traditional gas sensors often lack high sensitivity and selectivity. To address this, our study uses first-principles density functional theory (DFT) to investigate CuO-SnS monolayers for improved gas sensor performance. The results show that CuO modification significantly enhances the adsorption capacity and selectivity of SnS monolayers for NO2 and NO, with adsorption energies of −2.301 eV and −2.142 eV, respectively. Furthermore, CuO modification is insensitive to CO2 adsorption, demonstrating excellent selectivity. Structural and electronic analyses reveal that CuO modification reduces the band gap of SnS monolayers from 1.465 eV to 0.635 eV, improving the electrical conductivity and electron transfer, thereby enhancing the gas adsorption sensitivity. Further analyses highlight significant electronic interactions and charge transfer mechanisms between CuO-SnS monolayers and NO2 and SO2 molecules, indicating strong orbital hybridization. In conclusion, this study provides a theoretical basis for developing high-performance gas sensors, showing that CuO-SnS monolayers have great potential for detecting toxic gases.
The effective detection and maintenance of electrical equipment failures in circuit maintenance is crucial in reducing public property losses. Therefore, the research and development of a highly sensitive SF 6 decomposition detection device is of great significance. Here, in this paper, the adsorption behavior and sensing characteristics of TiO 2 , Ag 2 O doped GeTe monolayer for SF 6 decomposition species (H 2 S, SO 2 ) has been studied through first-principles analysis. The results show that the doping of Ag 2 O and TiO 2 enhances the conductivity of GeTe monolayer by 14.9 % and 16.8 %, respectively, and increases the adsorption energy of the doped GeTe monolayer for H 2 S and SO 2 by 214 % (TiO 2 -GeTe-H 2 S), 184 % (TiO 2 -GeTe-SO 2 ), 361 % (Ag 2 O-GeTe-H 2 S) and 191 % (Ag 2 O-GeTe-SO 2 ) respectively. The adsorption energy with proper size makes both doped GeTe monolayers highly sensitive and selective with a rapid recovery time, which theoretically solves the problem of industrial recycling of sensing materials. The research results provide a theoretical basis for the material selection of a highly selective sensor for detecting SF 6 decomposition products.