One of the major challenges in the circular economy relating to food packaging is the elimination of metallised film which is currently the industry standard approach to achieve the necessary gas barrier performance. Here, we report the synthesis of high aspect ratio 2D non-toxic layered double hydroxide (LDH) nanosheet dispersions using a non-toxic exfoliation method in aqueous amino acid solution. High O2 and water vapour barrier coating films can be prepared using food safe liquid dispersions through a bar coating process. The oxygen transmission rate (OTR) of 12 μm PET coated film can be reduced from 133.5 cc·m−2·day−1 to below the instrument detection limit (<0.005 cc·m−2·day−1). The water vapour transmission rate (WVTR) of the PET film can be reduced from 8.99 g·m−2·day−1 to 0.04 g·m−2·day−1 after coating. Most importantly, these coated films are also transparent and mechanically robust, making them suitable for flexible food packing while also offering new recycling opportunities.
A series of silica@layered double hydroxides (SiO2@Mg2Al-CO3-AMO-LDHs) have been synthesised by in situ precipitation of Mg2Al-CO3-LDH at room temperature in the presence of amorphous spherical silica particles (∼500 nm). We have systematically investigated a number of synthetic parameters in order to evaluate their effects on the composition, morphological and physical properties of the isolated materials. Syntheses carried out at moderate stirring speeds (e.g. 500 rpm) were found to promote the formation of vertically aligned LDH platelets with respect to the silica surface. Addition rates of the metal solutions slower than 0.43 mmol h−1 were found to create a thicker LDH shell consisting of vertically aligned LDH platelets. When the metal solutions were added rapidly (0.86 mmol h−1), we observed that for both slow and fast stirring speeds the synthesised core–shell materials had thin LDH shells and the majority of the LDH precipitated independent of the silica, forming unbound “free” LDH.
Layered double hydroxides (LDH) or their derived mixed oxides present marked acid-base properties useful in catalysis, but they are generally agglomerated, inducing weak accessibility to the active sites. In the search for improving dispersion and accessibility of the active sites and for controlling the hydrophilic/hydrophobic balance in the catalysts, nanocomposite materials appear among the most attractive. In this study, a series of nanocomposites composed of LDH and reduced graphene oxide (rGO), were successfully obtained by direct coprecipitation and investigated as base catalysts for the Claisen–Schmidt condensation reaction between acetophenone and benzaldehyde. After activation, the LDH-rGO nanocomposites exhibited improved catalytic properties compared to bare LDH. Moreover, they reveal great versatility to tune the selectivity through their composition and the nature or the absence of solvent. This is due to the enhanced basicity of the nanocomposites as the LDH content increases which is assigned to the higher dispersion of the nanoplatelets in comparison to bulk LDH. Lewis-type basic sites of higher strength and accessibility are thus created. The nature of the solvent mainly acts through its acidity able to poison the basic sites of the nanocatalysts.
Several procedures were employed in the preparation of different Pd- and Fe-based catalytic membrane reactors (CMRs) via the normal wet impregnation method, reverse filtration of a microemulsion, sputtering method, and the precipitation of a Fe complex. Depending on the chosen procedure, the metal active phase can be found on the exterior and/or interior part of the CMR or even in its pores in concentrations between 0.05 and 2 wt %. Moreover, we have managed to implement a unique systematic process to grow hydrotalcite in the pores of a Pd-CMR. To exemplify the activity of these new CMRs, we have tested them in the peroxidation of phenol and in situ epoxidation of trans-chalcone.