The equivalent source method (ESM) based on compressive sensing (CS) requires that the source has a sparse or approximately sparse representation in a suitable basis or dictionary. However, in practical applications, it is not easy to find the appropriate basis or dictionary due to the indeterminate characteristics of the source. To solve this problem, an equivalent redundant dictionary is constructed, which contains two core parts: one is the equivalent dictionary used in the CS-based ESMs under the sparse assumption, and the other one is the orthogonal basis obtained by the singular value decomposition (SVD). On this foundation, a method named compressed ESM based on the equivalent redundant dictionary (ERDCESM) is proposed to enhance the performances of source field reconstruction for different types of sources. Moreover, inspired by the idea of functional beamforming (FB), ERDCESM with order (ERDCESM- ) can possess a high dynamic range when detecting the source location. The numerical simulations are carried out at different frequencies to evaluate the performance of the proposed method, and the results suggest that the proposed method performs well both for sparse and even spatially extended sources. The validity and practicality of the proposed method are also verified by the experimental results.
The detection range and accuracy of light detection and ranging (LiDAR) systems are sensitive to variations in fog concentration, leading to the safety of the intended functionality-related (SOTIF-related) problems in the LiDAR-based fusion localization system (LMSFLS). However, due to the uncontrollable weather, it is almost impossible to quantitatively analyze the effects of fog on LMSFLS in a realistic environment. Therefore, in this study, we conduct a layered quantitative SOTIF analysis of the LMSFLS on foggy days using fog simulation. Based on the analysis results, we identify the component-level, system-level, and vehicle-level functional insufficiencies of the LMSFLS, the corresponding quantitative triggering conditions, and the potential SOTIF-related risks. To address the SOTIF-related risks, we propose a functional modification strategy that incorporates visibility recognition and a 3σ-criterion-based variance mismatch degree grading adaptive extended Kalman filter. The visibility of a scenario is recognized to judge whether the measurement information of the LiDAR odometry is disturbed by fog. Moreover, the proposed filter is adopted to fuse the abnormal measurement information of the LiDAR odometry with IMU and GNSS. Simulation results demonstrate that the proposed strategy can inhibit the divergence of the LMSFLS, improve the SOTIF of self-driving cars on foggy days, and accurately recognize the visibility of the scenarios.
7 April 2017 in Journal of Sandwich Structures & Materials
In this study, a theoretical investigation on the sound transmission loss characteristics of four-side simply supported sandwich panels considering the flexural rigidity of the face sheet has been presented. With the flexural rigidity of the face sheet taken into account, the sound transmission problem of the sandwich panels is derived from the governing equation of bending vibration. The sound transmission loss expression is also derived. The validation of the theoretical prediction model is validated by comparing with the high-accuracy finite element and boundary element simulation. Numerical analysis shows that the flexural rigidity of face sheet influences the natural frequencies obviously, and the theoretical prediction model proposed has high accuracy on predicting the natural frequencies and sound transmission loss of four-side simply supported sandwich panels. The effects of the face sheet flexural rigidity, the thickness of face sheets and core layer, as well as the damping coefficient of the core on the sound transmission loss are systematically investigated.
A computational fluid dynamics simulation method based on large eddy simulation is presented and applied to compute the sunroof buffeting of a sport utility vehicle. The simulation result, i.e. the buffeting level curve, coincides well with the road test. The simulation method is then employed to investigate the sunroof buffeting of a vehicle during the development process in the range of 30 km/h–90 km/h. The results show that the most severe sunroof buffeting occurs at 70 km/h, which corresponds to the resonant frequency of the cabin. Flow field visualizations reveal that strong pressure fluctuations are generated inside the cabin due to vortex shedding from the leading edge and impinging onto the trailing edge of the sunroof opening, which explains the mechanism of sunroof buffeting. A new deflector with a gap and a notched upper edge is designed to replace the original castle type deflector. The simulation results show that the newly designed deflector can reduce the buffeting level to 97.9 dB; that is, the sunroof buffeting is completely eliminated. Moreover, the phenomenon of sunroof buffeting reduction is explained by comparing and analyzing the flow field between the newly designed deflector and the original deflector.
In the field of sound source identification, robust and accurate identification of the targeted source could be a challenging task. Most of the existing methods select the regularization parameters whose value could directly affect the accuracy of sound source identification during the solving processing. In this paper, we introduced the ratio model norm to identify the sound source(s) in the engineering field. Using the alternating direction method of multipliers solver, the proposed approach could avoid the selection of the regularization parameter and localize sound source(s) with robustness at low and medium frequencies. Compared with other three methods employing classical penalty functions, including the Tikhonov regularization method, the iterative zoom-out-thresholding algorithm and the fast iterative shrinkage-thresholding algorithm, the Monte Carlo Analysis shows that the proposed approach with model leads to stable sound pressure reconstruction results at low and medium frequencies. The proposed method demonstrates beneficial distance-adaptability and signal-to-noise ratio (SNR)-adaptability for sound source identification inverse problems.