Nowadays, there is a growing interest to develop biodegradable functional composite materials for food packaging and biomedicine applications from renewable sources. Some composite films were prepared by the casting method using chitosan (CS) and agarose (AG) in different mass ratios. The composite films were analyzed for physical-chemical-mechanical properties including tensile strength (TS), elongation-at-break (EB), water vapor transmission rate (WVTR), swelling ratio, Fourier-transform infrared spectroscopy, and morphology observations. The antibacterial properties of the composite films were also evaluated. The obtained results reveal that an addition of AG in varied proportions to a CS solution leads to an enhancement of the composite film’s tensile strength, elongation-at-break, and water vapor transmission rate. The composite film with an agarose mass concentration of 60% was of the highest water uptake capacity. These improvements can be explained by the chemical structures of the new composite films, which contain hydrogen bonding interactions between the chitosan and agarose as shown by Fourier-transform infrared spectroscopy (FTIR) analysis and the micro-pore structures as observed with optical microscopes and scanning electron microscopy (SEM). The antibacterial results demonstrated that the films with agarose mass concentrations ranging from 0% to 60% possessed antibacterial properties. These results indicate that these composite films, especially the composite film with an agarose mass concentration of 60%, exhibit excellent potential to be used in food packaging and biomedical materials.

We proposed a novel strategy in the fabrication of biodegradable poly(acrylic acid-co-acrylamide)/poly(vinyl alcohol) (P(AAc-co-Am)/PVA) double network (DN) hydrogels with good mechanical and self-healing properties. In the DN hydrogel system, P(AAc-co-Am) polymers form a network through the ionic coordinates between –COO– and Fe³⁺ and hydrogen bonding between –COOH and –CONH₂, while another network is fabricated by the complexation between PVA and borax. The influences of the composition on the rheological behaviors and mechanical properties of the synthesized DN hydrogels were investigated. The rheological measurements revealed that the viscoelasticity and stiffness of the P(AAc-co-Am)/PVA DN hydrogels increase as the acrylamide and Fe³⁺ concentrations increase. At 0.05 mmol of Fe³⁺ and 50% of acrylamide, tensile strength and elongation at break of P(AAc-co-Am)/PVA DN hydrogels could reach 329.5 KPa and 12.9 mm/mm, respectively. These properties arise from the dynamic reversible bonds existed in the P(AAc-co-Am)/PVA DN hydrogels. These reversible bonds also give good self-healing properties, and the maximum self-healing efficiency of P(AAc-co-Am)/PVA DN hydrogels is up to 96.4%. The degradation test of synthesized DN hydrogels was also conducted under simulated physiological conditions and the weight loss could reach 74% in the simulated intestinal fluid. According to the results presented here, the synthesized P(AAc-co-Am)/PVA DN hydrogels have a potential application prospect in various biomedical fields.

A highly sensitive nitrite (NO₂⁻) electrochemical sensor is fabricated using glassy carbon electrode modified with Au nanoparticle and grapheme oxide. Briefly, this electrochemical sensor was prepared by drop-coating graphene oxide-chitosan mixed film on the surface of the electrode and then electrodepositing a layer of Au nanoparticle using cyclic voltammetry. The electrochemical behavior of NO₂⁻ on the sensor was investigated by cyclic voltammetry and amperometric i-t curve. The results showed that the sensor exhibited better electrocatalytic activity for NO₂⁻ in 0.1 mol/L phosphate buffer solution (PBS) (pH 5.0). The oxidation peak current was positively correlated with NO₂⁻ concentration in the ranges of 0.9 µM to 18.9 µM. The detection limit was estimated to be 0.3 µM. In addition, the interference of some common ions (e.g., NO₃⁻, CO₃²⁻, SO₄²⁻, Cl⁻, Ca²⁺ and Mg²⁺) and oxidizable compound including sodium sulfite and ascorbic acid in the detection of nitrite was also studied. The results show that this sensor is more sensitive and selective to NO₂⁻. Therefore, this electrochemical sensor provided an effective tool for the detection of NO₂⁻.

A new depsidone derivative (1), aspergillusidone G, was isolated from a marine fungus Aspergillus unguis, together with eight known depsidones (2‒9) and a cyclic peptide (10): agonodepside A (2), nornidulin (3), nidulin (4), aspergillusidone F (5), unguinol (6), aspergillusidone C (7), 2-chlorounguinol (8), aspergillusidone A (9), and unguisin A (10). Compounds 1‒4 and 7‒9 were obtained from the plasma induced mutant of this fungus, while 5, 6, and 10 were isolated from the original strain under chemical induction. Their structures were identified using spectroscopic analysis, as well as by comparison with literature data. The HPLC fingerprint analysis indicates that chemical induction and plasma mutagenesis effectively influenced the secondary metabolism, which may be due to their regulation in the key steps in depsidone biosynthesis. In bioassays, compound 9 inhibited acetylcholinesterase (AChE) with IC₅₀ in 56.75 μM. Compounds 1, 5, 7, 8, and 9 showed moderate to strong activity towards different microbes. Compounds 3, 4, and 5 exhibited potent larvicidality against brine shrimp. In docking studies, higher negative CDOCKER interaction energy and richer strong interactions between AChE and 9 explained the greater activity of 9 compared to 1. Chemical induction and plasma mutagenesis can be used as tools to expand the chemodiversity of fungi and obtain useful natural products.

In this paper, nitrogen-doped carbon quantum dots (N-CQDs) were synthesized by a solvothermal method using 1,2,4-triaminobenzene as a carbon precursor. The surface of the synthesized N-CQDs was modified with amino functional groups. The results indicated that N-CQDs had various N-related functional groups and chemical bonds and were amorphous in structure. At the same time, the quantum yield of N-CQDs was 5.11%, and the average lifetime of fluorescence decay was 5.79 ns. The synthesized N-CQDs showed good selectivity for and sensitivity to Ag⁺. A linear relationship between N-CQDs detection efficiency and Ag⁺ concentration was observed for concentration ranges of Ag⁺ corresponding to 0–10 μM and 10–30 μM. In addition, N-CQDs were used for the detection of trace Ag⁺ in food packaging material. The silver ion content of the sample determined by the N-CQDs detection method was 1.442 mg/L, with a relative error of 6.24% with respect to flame atomic absorption spectrometry, according to which the Ag⁺ content was 1.352 mg/L. This indicates that the N-CQDs detection method is reliable. Therefore, the N-CQDs prepared in this paper can detect Ag⁺ rapidly, simply, and sensitively and are expected to be a promising tool for the detection of trace Ag⁺ in food packaging materials.