To solve the early rutting failure of asphalt pavement, the application of rock asphalt from Sichuan, China, based on anti-rutting performance, was studied. Preparations of North Sichuan rock asphalt (NS RA) and NS RA-modified asphalt mixture were elaborated in detail. Using Zhonghai AH-70 asphalt, Esso AH-70 asphalt, North American rock asphalt (NA RA) and NS RA, the performances of NS RA modified asphalt were researched based on index tests, Brookfield rotary viscosity test and bending beam rheometer test. A performance verification of NS RA-modified asphalt was carried out using rutting calculation, the rutting, indirect tensile fatigue, freeze–thaw split and small beam bending tests based on five kinds of selected gradations. The results indicated that in comparison with NA RA, the NS RA has a good modification effect as well. The NS RA can obviously improve the anti-rutting ability of the asphalt binder, and it can enhance its anti-aging performance as well. For the NS RA-modified asphalt mixture, it is feasible to determine the optimum NS RA content, based on its anti-rutting performance, and its optimum NS RA content is about 8%. The dynamic stability values of NS RA-modified asphalt mixtures are at least 3-fold higher than those of the base asphalt mixtures, and they are all far greater than the summer hot area requirement (no less than 2800 times/mm). NS RA-modified asphalt mixtures used in the middle course of asphalt pavement can obviously improve the anti-rutting performance of the pavement, and to enhance the anti-rutting ability of pavements, it should be used in the middle course of the pavement. The fatigue life values of NS RA-modified asphalt mixtures are at least 14.5-fold higher than those of the base asphalt mixtures. The freeze–thaw splitting strength ratio values of NS RA-modified asphalt mixtures are improved by at least 9.5% over the base asphalt mixtures, and their freeze–thaw splitting strength ratio values are all greater than the requirement (no less than 75%). In comparison with the base asphalt, the low temperature performances of NS RA-modified asphalt and its mixtures slightly decline, but they can meet the requirements for the zones with a minimum temperature of no less than –21.5 °C too. Therefore, except for the extremely low temperature area, it is an effective method for solving the rutting problem of pavement for using NS RA-modified asphalt.

To solve the durability of flexible base asphalt pavement, especially its anti-rutting problem, a design method on durable asphalt pavement of flexible base on anti-rutting performance was put forward in the paper, based on many experiments and calculations. Firstly, a method that asphalt could be selected according to penetration and the anti-rutting factor of its base asphalt was found, which solved the problem of the asphalt selection of the flexible base asphalt mixture design. Meanwhile, a method of skeleton-density structure gradation design was proposed based on the fractal void ratio of coarse aggregate, fractal volume of fine aggregate in coarse aggregate, penetration, fractal dimension of gradation particle size, and rutting tests, which effectively solved in advance the rutting and fatigue performance of flexible base asphalt mixtures. Then, on the basis of the fatigue damage, a calculation method of fatigue life was suggested, which solved the problem that the fatigue damage of asphalt mixtures rarely considered the combined effects of creep damage and fatigue damage. In addition, a calculation method of rutting was formulated based on vehicle dynamic load and ANSYS 16.0 software. Lastly, the feasibility of the design method on durable asphalt pavement of flexible base on anti-rutting performance was verified combining with the real engineering of a supporting project and several numerical calculations and tests.

The objective of this research was to develop a solution for the deterioration effect on the high-temperature rutting performance and water stability of SMC. This research proposed a method for designing an SMC normal temperature modified asphalt mixture based on the existing findings, experimental research and the performance balance. First, the power function curve model of the aggregate gradation was put forward. The 0.075 mm, 4.75 mm and nominal maximum particle size were the key points of the aggregate gradation, and their passing rate was about 6%, 30%, and 95% respectively. Then, on the basis of the quadratic curve model, a method for determination of the optimum asphalt aggregate ratio of SMC normal temperature modified asphalt mixture was put forward, considering the skeleton-density structure. Last, rutting tests, small beam bending tests, freeze-thaw split tests, permeability coefficient tests, texture depth tests and pavement roughness tests were conducted, and the test results all met the performance requirements of the specifications for the construction of highway asphalt pavement in China perfectly, especially the high-temperature and water stability properties, which indicated that the design method for SMC normal temperature modified asphalt mixtures based on performance balance presented in this paper was reasonable and practical.

To solve the construction safety problem of ultra-buried and large-span rich water tunnels, and in combination with the entity project of the Manchuanguan ultra-buried and large-span rich water tunnel, a construction safety analysis of ultra-buried and large-span rich water tunnels is carried out using FLAC3D software. The construction method and safety measures for the shallow buried underground excavation rich water tunnel are put forward, which can solve such key problems as construction method, drainage, drilling and blasting of the ultra-shallow buried underground excavation large-span rich water tunnel. The on-site monitoring results show that the construction methods and safety measures adopted are feasible, and have important engineering application value.