Shovasis Kumar Biswas

Mr. Shovasis Kumar Biswas

Electrical and Computer Engineering, University of Wisconsin–Madison, Madison, Alabama, USA
orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 February 2025 in Optica
Verified
Journal Article
Closed access
SRSamir Rosas
Samir Rosas
WAWihan Adi
Wihan Adi
ABAidana Beisenova
Aidana Beisenova
Shovasis Kumar BiswasShovasis Kumar Biswas
Shovasis Kumar Biswas
FKFurkan Kuruoğlu
Furkan Kuruoğlu
Filiz YesilkoyFiliz Yesilkoy
Filiz Yesilkoy
Optical metasurfaces provide solutions to label-free biochemical sensing by localizing light resonantly beyond the diffraction limit, thereby selectively enhancing light–matter interactions for improved analytical performance. However, high-Q resonances in metasurfaces are usually achieved in the reflection mode, which impedes metasurface integration into compact imaging systems. Here, we demonstrate a metasurface platform for advanced biochemical sensing based on the physics of the bound states in the continuum (BIC) and electromagnetically induced transparency (EIT) modes, which arise when two interfering resonances from a periodic pattern of tilted elliptic holes overlap both spectrally and spatially, creating a narrow transparency window in the mid-infrared spectrum. We experimentally measure these resonant peaks observed in transmission mode (Q∼734 at λ∼8.8µm) in free-standing silicon membranes and confirm their tunability through geometric scaling. We also demonstrate the strong coupling of the BIC-EIT modes with a thinly coated PMMA film on the metasurface, characterized by a large Rabi splitting (32cm−1) and biosensing of protein monolayers in transmission mode. Our new photonic platform can facilitate the integration of metasurface biochemical sensors into compact and monolithic optical systems while being compatible with scalable manufacturing, thereby clearing the way for on-site biochemical sensing in everyday applications.

20 November 2024 in Nature Communications
Verified
Journal Article
Open access
PDF file
WAWihan Adi
Wihan Adi
SRSamir Rosas
Samir Rosas
ABAidana Beisenova
Aidana Beisenova
Shovasis Kumar BiswasShovasis Kumar Biswas
Shovasis Kumar Biswas
HMHongyan Mei
Hongyan Mei
Filiz YesilkoyFiliz Yesilkoy
Filiz Yesilkoy
Optical metasurfaces can manipulate electromagnetic waves in unprecedented ways at ultra-thin engineered interfaces. Specifically, in the mid-infrared (mid-IR) region, metasurfaces have enabled numerous biochemical sensing, spectroscopy, and vibrational strong coupling (VSC) applications via enhanced light-matter interactions in resonant cavities. However, mid-IR metasurfaces are usually fabricated on solid supporting substrates, which degrade resonance quality factors (Q) and hinder efficient sample access to the near-field electromagnetic hotspots. Besides, typical IR-transparent substrate materials with low refractive indices, such as CaF2, NaCl, KBr, and ZnSe, are usually either water-soluble, expensive, or not compatible with low-cost mass manufacturing processes. Here, we present novel free-standing Si-membrane mid-IR metasurfaces with strong light-trapping capabilities in accessible air voids. We employ the Brillouin zone folding technique to excite tunable, high-Q quasi-bound states in the continuum (qBIC) resonances with our highest measured Q-factor of 722. Leveraging the strong field localizations in accessible air cavities, we demonstrate VSC with multiple quantities of PMMA molecules and the qBIC modes at various detuning frequencies. Our new approach of fabricating mid-IR metasurfaces into semiconductor membranes enables scalable manufacturing of mid-IR photonic devices and provides exciting opportunities for quantum-coherent light-matter interactions, biochemical sensing, and polaritonic chemistry.

15 April 2024 in Nanophotonics
Verified
Journal Article
Open access
PDF file
Shovasis Kumar BiswasShovasis Kumar Biswas
Shovasis Kumar Biswas
WAWihan Adi
Wihan Adi
ABAidana Beisenova
Aidana Beisenova
SRSamir Rosas
Samir Rosas
EAEduardo Romero Arvelo
Eduardo Romero Arvelo
Filiz YesilkoyFiliz Yesilkoy
Filiz Yesilkoy
Thanks to their giant, yet tunable, Q ‐factor resonances, all‐dielectric metasurfaces supporting the quasi‐bound states in the continuum (q‐BIC) resonances are well‐suited to provide a promising platform for quantum‐coherent light–matter interactions. Yet, the strong coupling regime, characterized by the hybrid light–matter states – polaritons, has not yet been fully explored in the mid‐infrared regime. This paper investigates the parameter space of vibrational strong coupling (VSC) between material and metasurface cavities supporting q‐BIC resonances in the mid‐infrared spectral range. We outline the effects of transition dipole strength, damping rate, and the number of molecules coupled to a single cavity, as well as the cavity damping rates, to understand their respective impacts on VSC. By tuning the Q ‐factor of the metasurface and material parameters, a new transition light–matter coupling zone is introduced, bridging the gap between weak and strong coupling, where polaritons form but their linewidths prohibit their spectral identification. The study further identifies the effects of cavity linewidth on polariton peak separability in strongly coupled systems, highlighting that the cavities with smaller nonradiative losses and narrower linewidths facilitate better polariton separability. Moreover, we found that matching cavity and material loss, satisfying the critical strong coupling condition, enhances the coupling strength between cavity and material. Overall, these findings can guide the design of photonic cavities suited for VSC experiments, contributing to the burgeoning fields of polaritonic chemistry, light‐mediated modulation of chemical reactivity, and highly sensitive molecular spectroscopy.

25 December 2020 in IEEE Access
Verified
Journal Article
Open access
MAM. Hussayeen Khan Anik
M. Hussayeen Khan Anik
MIM. Ifaz Isti
M. Ifaz Isti
S. IslamS. Islam
S. Islam
SMSakib Mahmud
Sakib Mahmud
HTHriteshwar Talukder
Hriteshwar Talukder
KKKyung Sup Kwak
Kyung Sup Kwak
A surface plasmon resonance (SPR) based photonic crystal fiber (PCF) sensor having a milled microchannel, and an open D-channel has been proposed in this paper. The sensor shows good functionality in the wide sensing range of 1.14-1.36 Refractive Index Units (RIU) of the analyte, having the capability to detect low refractive index (RI). The Finite Element Method (FEM) based numerical investigations dictate that the proposed sensor has been able to gain a maximum wavelength sensitivity of 53,800 nm/RIU according to the wavelength interrogation technique. The amplitude interrogations show that the sensor has the highest amplitude sensitivity of 328 RIU -1 . The highest FOM (Figure of Merit) has been found to be 105 RIU -1 . The sensor evinces a minimum wavelength resolution of $1.86\times 10 ^{-6}$ RIU, which secures high detection accuracy. A circular perfectly matched layer (PML) is implemented in the sensor's outermost layer as a boundary condition to absorb surface radiations. Gold is the plasmonic metal, while TiO2 acts as the adhesive layer for gold attachment on silica. Due to the high sensitivity with a broad range of analyte detection, the sensor is well suited for practical biochemical detection purposes.

25 February 2019 in Photonics
Verified
Journal Article
Open access
PDF file
Shovasis Kumar BiswasShovasis Kumar Biswas
Shovasis Kumar Biswas
RARishad Arfin
Rishad Arfin
AHAshfia Binte Habib
Ashfia Binte Habib
SASyed Bin Amir
Syed Bin Amir
ZZZunayeed-Bin Zahir
Zunayeed-Bin Zahir
SHShahriar Hussain
Shahriar Hussain
In this paper, we propose a modified design of a hexagonal circular photonic crystal fiber (HC-PCF) which obtains a large negative dispersion and ultrahigh birefringence simultaneously. The optical properties of the proposed HC-PCF were investigated using the finite element method (FEM) incorporated with a circular perfectly matched layer at the boundary. The simulation results showed large negative dispersion of −1044 ps/nm.km and ultrahigh birefringence of 4.321 × 10−2 at the operating wavelength of 1550 nm for the optimum geometrical parameters. Our proposed HC-PCF exhibited the desirable optical properties without non-circular air holes in the core and cladding region which facilitates the fabrication process. The large negative dispersion of the proposed microstructure over the wide spectral range, i.e., 1350 nm to 1600 nm, and high birefringence make it a suitable candidate for high-speed optical broadband communication and different sensing applications.

5 September 2018 in Photonics
Verified
Journal Article
Open access
PDF file
Shovasis Kumar BiswasShovasis Kumar Biswas
Shovasis Kumar Biswas
S M Rakibul IslamS M Rakibul Islam
S M Rakibul Islam
MIMd Rubayet Islam
Md Rubayet Islam
MMMohammad Mahmudul Alam Mia
Mohammad Mahmudul Alam Mia
SSSummit Sayem
Summit Sayem
Feroz AhmedFeroz Ahmed
Feroz Ahmed
This paper proposes a hexagonal photonic crystal fiber (H-PCF) structure with all circular air holes in order to simultaneously achieve ultrahigh birefringence and high nonlinearity. The H-PCF design consists of an asymmetric core region, where one air hole is a reduced diameter and the air hole in its opposite vertex is omitted. The light-guiding properties of the proposed H-PCF structure were studied using the full-vector finite element method (FEM) with a circular perfectly matched layer (PML). The simulation results showed that the proposed H-PCF exhibits an ultrahigh birefringence of 3.87 × 10−2, a negative dispersion coefficient of −753.2 ps/(nm km), and a nonlinear coefficient of 96.51 W−1 km−1 at an excitation wavelength of 1550 nm. The major advantage of our H-PCF design is that it provides these desirable modal properties without using any non-circular air holes in the core and cladding region, thus making the fiber fabrication process much easier. The ultrahigh birefringence, large negative dispersion, and high nonlinearity of our designed H-PCF make it a very suitable candidate for optical backpropagation applications, which is a scheme for the simultaneous dispersion and nonlinearity compensation of optical-fiber transmission links.