A two-dimensional model of microwave-induced plasma (field frequency 2.45 GHz) in argon at atmospheric pressure is presented. The model describes in a self-consistent manner the gas flow and heat transfer, the in-coupling of the microwave energy into the plasma, and the reaction kinetics relevant to high-pressure argon plasma including the contribution of molecular ion species. The model provides the gas and electron temperature distributions, the electron, ion, and excited state number densities, and the power deposited into the plasma for given gas flow rate and temperature at the inlet, and input power of the incoming TEM microwave. For flow rate and absorbed microwave power typical for analytical applications (200\char21{}400 ml/min and 20 W), the plasma is far from thermodynamic equilibrium. The gas temperature reaches values above 2000 K in the plasma region, while the electron temperature is about 1 eV. The electron density reaches a maximum value of about 4 \ifmmode\times\else\texttimes\fi{}1021m$-${}3. The balance of the charged particles is essentially controlled by the kinetics of the molecular ions. For temperatures above 1200 K, quasineutrality of the plasma is provided by the atomic ions, and below 1200 K the molecular ion density exceeds the atomic ion density and a contraction of the discharge is observed. Comparison with experimental data is presented which demonstrates good quantitative and qualitative agreement.

The synergistic antimicrobial effects of plasma-processed air (PPA) and plasma-treated water (PTW), which are indirectly generated by a microwave-induced non-atmospheric pressure plasma, were investigated with the aid of proliferation assays. For this purpose, microorganisms (Listeria monocytogenes, Escherichia coli, Pectobacterium carotovorum, sporulated Bacillus atrophaeus) were cultivated as monocultures on specimens with polymeric surface structures. Both the distinct and synergistic antimicrobial potential of PPA and PTW were governed by the plasma-on time (5–50 s) and the treatment time of the specimens with PPA/PTW (1–5 min). In single PTW treatment of the bacteria, an elevation of the reduction factor with increasing treatment time could be observed (e.g., reduction factor of 2.4 to 3.0 for P. carotovorum). In comparison, the combination of PTW and subsequent PPA treatment leads to synergistic effects that are clearly not induced by longer treatment times. These findings have been valid for all bacteria (L. monocytogenes > P. carotovorum = E. coli). Controversially, the effect is reversed for endospores of B. atrophaeus. With pure PPA treatment, a strong inactivation at 50 s plasma-on time is detectable, whereas single PTW treatment shows no effect even with increasing treatment parameters. The use of synergistic effects of PTW for cleaning and PPA for drying shows a clear alternative for currently used sanitation methods in production plants. Highlights: Non-thermal atmospheric pressure microwave plasma source used indirect in two different modes—gaseous and liquid; Measurement of short and long-living nitrite and nitrate in corrosive gas PPA (plasma-processed air) and complex liquid PTW (plasma-treated water); Application of PTW and PPA in single and combined use for biological decontamination of different microorganisms.

Microorganisms are predominantly organized in biofilms, where cells live in dense communities and are more resistant to external stresses compared to their planktonic counterparts. With in vitro experiments, the susceptibility of Candida albicans biofilms to a non-thermal plasma treatment (plasma source kINPen®09), in terms of growth, survival, and cell viability was investigated. Behind that background, the C. albicans strain SC5314 (ATCC® MYA-2876™) was plasma treated for different time periods (30 s, 60 s, 120 s, 180 s, 300 s). The results of the experiments embracing colony forming units, fluorescence LIVE/DEAD™ assays, and XTT assays and revealed a negative influence of the plasma treatment on the proliferation ability, vitality, and the metabolism of C. albicans biofilms, respectively. Morphological analysis of plasma treated biofilms using atomic force microscopy supported the indications for lethal plasma effects concomitant with membrane disruptions and the loss of intracellular fluid. Controversial to other publications, fluorescence- and confocal laser scanning-microscopic inspection of plasma treated biofilms indicated that an inactivation of cells mainly appeared on the bottom side of the biofilms. If this inactivation leads to a detachment of the biofilms from the overgrown surface, it might offer completely new approaches in the plasma treatment of biofilms. Because of its biochemical-mechanical mode of action, resistance of microbial cells against plasma are unknown at this state of research. Importance Microbial communities are an increasing problem in medicine but also in industry. Thus, an efficient and rapid removal of biofilms is becoming increasingly important. With the aid of the kINPen®09, a radiofrequency plasma jet (RFPJ), decisive new findings on the effects of plasma on C. albicans biofilms could be obtained. This work was able to show that the inactivation of biofilms mainly takes place on the bottom side, which in turn offers new possibilities for the removal of biofilms by other strategies, e.g. mechanical treatment.This results demonstrated that non-thermal atmospheric pressure plasma is well-suited for biofilm decontamination.