This work is motivated by the difficulty of cultivating crops in horticulture greenhouses under hot and arid climate conditions. The main challenge is to provide a suitable greenhouse indoor environment, with sufficiently low costs and low environmental impacts. The climate control inside the greenhouse constitutes an efficient methodology for maintaining a satisfactory environment that fulfills the requirements of high-yield crops and reduced energy and water resource consumption. In hot climates, the cooling systems, which are assisted by an effective control technique, constitute a suitable path for maintaining an appropriate climate inside the greenhouse, where the required temperature and humidity distribution is maintained. Nevertheless, most of the commonly used systems are either highly energy or water consuming. Hence, the main objective of this work is to provide a detailed review of the research studies that have been carried out during the last few years, with a specific focus on the technologies that allow for the enhancement of the system effectiveness under hot and arid conditions, and that decrease the energy and water consumption. Climate control processes in the greenhouse by means of manual and smart control systems are investigated first. Subsequently, the different cooling technologies that provide the required ranges of temperature and humidity inside the greenhouse are detailed, namely, the systems using heat exchangers, ventilation, evaporation, and desiccants. Finally, the recommended energy-efficient approaches of the desiccant dehumidification systems for greenhouse farming are pointed out, and the future trends in cooling systems, which include water recovery using the method of combined evaporation–condensation, as well as the opportunities for further research and development, are identified as a contribution to future research work.

This study aims to study the thermal properties and the microstructure of composite materials based on mortar combined with Juncus maritimus fibers. Effective thermophysical properties of the composite materials containing Juncus maritimus fibers are experimentally and theoretically investigated. To better understand the morphology of these new composites, the corresponding microstructures were characterized in 2D by scanning electron microscope and in 3D using micro computed tomography. The local thermal conductivity of the Juncus maritimus fibers was identified using theoretical models and experimental measurement of the effective thermal conductivity of packed bed of crushed fibers. The thermal conductivity of the mortar matrix at given porosity was also determined using experimental measurement data and a theoretical model. The most appropriate analytical laws to predict effective thermal conductivity of mortar composites containing fibers are deduced from experimental thermal conductivity results.

Modelling effective thermal properties is crucial for optimizing the thermal performance of materials such as new green insulating fibrous media. In this study, a numerical model is proposed to calculate the effective thermal conductivity of these materials. The fibers are considered to be non-overlapping and randomly oriented in space. The numerical model is based on the finite element method. Particular attention is paid to the accuracy of the results and the influence of the choice of the representative elementary volume (REV) for calculation (cubic or rectangular parallelepiped slice). The calculated effective thermal conductivity of fibrous media under different boundary conditions is also investigated. A set of usual mixed boundary conditions is considered, alongside the uniform temperature gradient conditions. The REV rectangular slice and uniform temperature gradient boundary conditions provide a more accurate estimate of the effective thermal conductivity and are therefore recommended for use in place of the usual cubic representative elementary volume and the usual mixed boundary conditions. This robust model represents a principal novelty of the work. The results are compared with experimental and analytical data previously obtained in the literature for juncus maritimus fibrous media, for different fiber volume fractions, with small relative deviations of 7%. Analytical laws are generally based on simplified assumptions such as infinitely long fibers, and may neglect heat transfer between different phases. Both short and long fiber cases are considered in numerical calculations.