Roadbed tribological energy (RTE) is a promising recoverable resource with an estimated potential on the terawatt scale, generated annually by the interaction between tires and road surfaces. However, RTE remains underutilized due to the lack of effective energy harvesting technologies that can address its high-entropy characteristics. Here, we present a revolutionary harvester formed by a freestanding layer triboelectric nanogenerator array embedded in the road. The harvester effectively converts low-grade vibratory RTE into electrical energy. It demonstrates the potential to achieve a peak power of 16.409 milliwatts and an average power of 2.2 milliwatts from a compact 78–square centimeter road area under a single tire impact, with a triboelectric conversion efficiency of 11.723%. In addition, we developed a self-powered intelligent and connected transportation system (SP-ICTS), integrating a five-in-one harvesting array. Experimental findings show that the system can meet the SP-ICTS’s electricity requirements along a 1-kilometer segment with a 50-meter harvester.
AZ91-Y magnesium alloy with different thicknesses were prepared by die casting process. The main existence forms of Y in alloy and the effects of Y on microstructure and mechanical properties of alloy were studied, the main reason for the change of mechanical properties and fracture mechanism were analyzed. The results show that, yttrium exists mainly in the forms of Al2Y phase and trace solid solution in α-Mg. Yttrium can refine the grain of α-Mg, reduce the amount of eutectic β-Mg17Al12 phase and promote its discrete distribution. The room temperature tensile strength and elongation of alloy increased first and then decreased with the increase of Y content. The designed alloys containing 0.6% Y (measured containing 0.63% Y) have better mechanical properties. The change of mechanical properties of alloy is a comprehensive reflection of the effect of solid solution, grain refinement and second phase. The cracking of Al2Y phase and β-Mg17Al12 phase and crack propagation through Al2Y phase and β-Mg17Al12 phase are the main fracture mechanism of magnesium alloy containing yttrium. The cooling rate does not change the trend of the influence of Y, but affects the degree of influence of Y.
29 June 2022 in Journal of Materials Research and Technology