The pyrolysis of food waste has high economic potential and produces several value-added products, such as gas, bio-oil, and biochar. In South Korea, biochar production from food waste is prohibited, because dioxins are generated during combustion caused by the chloride ions arising from the high salt content. This study is the first to examine the water quality and the applicability of food waste-based biochar as solid refuse fuel (SRF) based on a demineralization process. The calorific value increased after demineralization due to the removal of ionic substances and the high carbon content. The chloride ion removal rate after demineralization increased with the increasing pyrolysis temperature. A proximate analysis of biochar indicated that the volatile matter decreased, while ash and fixed carbon increased, with increasing pyrolysis temperature. At 300 °C pyrolysis temperature, all domestic bio-SRF standards were met. The organic matter concentration in water decreased with increasing carbonization temperature, and the concentrations of soluble harmful substances, such as volatile organic compounds (VOCs), were within the standards or non-detectable. These results suggest that biochar can be efficiently generated from food waste while meeting the emission standards for chloride ions, dissolved VOCs, ash, and carbon.
This study used biogas from a wastewater treatment plant and bacterial community where methanotrophs, Methylophilus, and ammonia-oxidizing bacteria clusters coexisted to propose an effective method for biological carbon fixation and nitrogen removal in wastewater treatment for carbon capture, utilization, and storage (CCUS). Biogas from wastewater treatment plant was provided, instead of purified CH4, to provide operation and maintenance conditions of bio-catalyst reaction for efficient biological carbon fixation by bacterial community using methane and CO2. This study assessed the conditions to induce type X methanotrophs that can use CO2 as a carbon source, as dominant species in the bacterial community and continuously and effectively supply reducing equivalents required for the conversion of CO2 to methanol within the system. Herein, the results of inducing efficient co-existence of methanotrophs, Methylophilus, and ammonia-oxidizing bacteria cluster in the bacterial community were shown.
We developed a lab-scale aerobic–methane oxidation bioreactor (MOB)–anoxic system, combining a MOB and the aerobic–anoxic denitrification process, and evaluated its potential for advanced nitrogen treatment in wastewater treatment plants (WWTPs). The MOB used biogas generated from a WWTP and secondary-treated wastewater to support mixed methanotroph cultures, which mediated the simultaneous direct denitrification by methanotrophs and methanol production necessary for denitrifying bacteria in the anoxic chamber for denitrification. Compared to the aerobic–anoxic process, the aerobic–MOB–anoxic system with an influent concentration of 4.8 L·day−1 showed a marked increase in the reduction efficiency for total nitrogen (41.9% vs. 85.9%) and PO4−3-P (41.1% vs. 69.5%). However, the integrated actions of high nitrogen and phosphorus consumption are required for methanotroph growth, as well as the production and supply of methanol as a carbon source for denitrification and methane monooxygenase-mediated oxidation of NH3 into N2O by methanotrophs. After three months of continuous operation using actual wastewater, the total nitrogen removal rate was 76.3%, equivalent to the rate observed in a tertiary-advanced WWTP, while the total phosphorus removal rate reached 83.7%.
Biochars prepared from macro-algae have a lower C/N ratio compared to lignocellulosic biochar, which is advantageous for direct nutrition. In particular, Sargassum, a marine macro-algae, has a high Mg content; hence, it can be expected to adsorb P and N simultaneously. In this study, Sargassum horneri biochar (SB), pyrolyzed at 400, 500, and 600 °C, was doped with innate Mg through water leaching, and nutrient recovery from the wastewater-mimicking solution was confirmed. The biochar pyrolyzed at 600 °C showed maximum Mg adsorption during water leaching, and the efficiency of K and Na removal was also high, at 92.7% and 91.9%, respectively. The addition of MgCl2 during pyrolysis and high ion exchange did not show distinct advantages for surface modification and nutrient adsorption. X-ray photoelectron spectroscopy analysis confirmed the participation of biochar in the surface adsorption of Mg and PO4 recovery. The PO4 sorption capacity of biochar reached >120 mg·g−1, while the sorption capacity for NH4 was low, at 22.8–28.2 mg·g−1, suggesting that Mg-surface-doped SB presented excellent phosphorus recovery. Hence, upgrading an adsorbent as a wastewater-treatment material and soil ameliorant that recovers nutrients using innate Mg from Sargassum is possible through appropriate surface modification.
Accurate forecasting of household waste generation is essential for sustainable urban planning and the development of data-driven environmental policies. Conventional statistical models, while simple and interpretable, often fail to capture the nonlinear and multidimensional relationships inherent in waste production patterns. This study proposes a machine learning-based regression framework utilizing Random Forest and XGBoost algorithms to predict annual household waste generation across four metropolitan regions in South Korea Seoul, Gyeonggi, Incheon, and Jeju over the period from 2000 to 2023. Independent variables include demographic indicators (total population, working-age population, elderly population), economic indicators (Gross Regional Domestic Product), and regional identifiers encoded using One-Hot Encoding. A derived feature, elderly ratio, was introduced to reflect population aging. Model performance was evaluated using R2, RMSE, and MAE, with artificial noise added to simulate uncertainty. Random Forest demonstrated superior generalization and robustness to data irregularities, especially in data-scarce regions like Jeju. SHAP-based interpretability analysis revealed total population and GRDP as the most influential features. The findings underscore the importance of incorporating economic indicators in waste forecasting models, as demographic variables alone were insufficient for explaining waste dynamics. This approach provides valuable insights for policymakers and supports the development of adaptive, region-specific strategies for waste reduction and infrastructure investment.
The efficiency of methane production by anaerobic digestion (AD), during which energy is generated from organic waste, can be increased in various ways. Recent research developments have increased the volume of gas production during AD using biochar. Previous studies have used food waste itself in AD, or, added wood-biochar or sewage sludge charcoal as an accelerant of the AD process. The application of food-waste biochar in AD using activated sludge has not yet been studied and is considered a potential method of utilizing food waste. Therefore, this study investigated the use of biochar prepared by the thermal decomposition of food waste as an additive to AD tanks to increase methane production. The addition of food-waste biochar at 1% of the digestion tank volume increased the production of digestion gas by approximately 10% and methane by 4%. We found that food-waste biochar served as a medium with trace elements that promoted the proliferation of microorganisms and increased the efficiency of AD.