A novel robotic gripper with soft surfaces and underactuated joints was proposed. The soft surface was fabricated from a deformable rubber bag filled with incompressible fluid and a microgripper inside the fluid. A ratchet was installed at the underactuated joint so that the joint's rotation caused by contact with an environment, such as a supporting surface, can be preserved, and the actions of scooping and enveloping an object are realized. With one actuator, the gripper realized three modes, i.e., parallel gripper, pinching, and enveloping. The range of graspable objects was wide and included soft, rigid, deformable, fragile, small (boundary length less than 30 mm), large (more than 80 mm long), thin (less than 0.5 mm), and heavy (more than 3 kg) objects.

In this letter, we present a novel gripper, whose design was inspired by chuck clamping devices, for transferring heavy objects and assembling parts precisely in industrial applications. The developed gripper is lightweight (0.9 kg), can manipulate heavy payloads (over 23 kgf), and can automatically align its position and posture via a grasping motion. A fingertip design criterion is presented for the position alignment, while a control strategy is presented for the posture alignment. With one actuator, this gripper realized the above features. This letter describes the mathematical analyses and experiments used to validate these key metrics.

In this study, we propose a strategy for delicately grasping fragile objects using a robotic gripper with highly deformable fluid fingertips. In an earlier study, we developed a soft fingertip, referred to as a fluid fingertip, which was fabricated from a deformable rubber bag filled with incompressible fluid. The proposed strategy detects the preferable grasping point where fracturing of the target object is avoided while the applied force or pressure from the fluid fingertip is substantially transmitted to the target. In this grasping point, the behavior of the fluid pressure changes with respect to the pushing distance when pushing at a constant speed. The other features of the strategy determining the grasping point are as follows: (1) the threshold for the detection of the grasping point is fixed or constant with respect to the type of target object; (2) information regarding the deformation and stiffness of the fingertips and target object is not required. The detection of the grasping point through behavioral changes in the pressure is performed by comparing the fitting accuracies of fitting models utilizing information of the fluid pressure and pushing distance. The validity of the proposed approach is verified through several experiments.

This study proposed a novel robotic gripper that can achieve grasping and infinite wrist twisting motions using a single actuator. The gripper is equipped with a differential gear mechanism that allows switching between the grasping and twisting motions according to the magnitude of the tip force applied to the finger. The grasping motion is activated when the tip force is below a set value, and the wrist twisting motion is activated when the tip force exceeds this value. “Twist grasping,” a special grasping mode that allows the wrapping of a flexible thin object around the fingers of the gripper, can be achieved by the twisting motion. Twist grasping is effective for handling objects with flexible thin parts, such as laminated packaging pouches, that are difficult to grasp using conventional antipodal grasping. In this study, the gripper design is presented, and twist grasping is analyzed. The gripper performance is experimentally validated.

This letter proposes a novel pneumatic soft robotic hand that incorporates a mechanism that can switch the airflow path using a single airflow control. The developed hand can control the finger motion and operate the surface friction variable mechanism. In the friction variable mechanism, a lubricant is injected onto the high-friction finger surface to reduce surface friction. To inject the lubrication using a positive-pressure airflow, the Venturi effect is applied. The design and evaluation of the airflow-path switching and friction variable mechanisms are described. Moreover, the entire design of a soft robotic hand equipped with these mechanisms is presented. The performance was validated through grasping, placing, and manipulation tests.

This letter proposes a robust grasping strategy for unknown objects by performing non-contact grasp-stability evaluation based on proximity sensing. First, we developed a proximity sensor for a multi-fingered hand. Its features are sensor mounting on a spherical fingertip and coating with transparent resin, which are advantageous for nearest point estimation and fingertip motion generation. Next, we realized consecutive evaluation of grasp-stability based on force-closure with assuming the nearest points to be the contact points. By introducing a high-speed sensing and calculation method, the grasp-stability can be consecutively evaluated and updated as the hand moves around the object. Then, we implemented a grasping strategy that adaptively activates multiple motion-primitives based on the information on the nearest points and the grasp-stability. It executes unknown-object grasping by searching for a pose with high grasp-stability and approaching the fingertip to realize the pose. The effectiveness of the methods was confirmed by actual experiments.