In this work, the fatigue evolution of solder joints in a photovoltaic module at a hot climate under thermo-mechanical cycling was evaluated. The finite element modeling simulation results showed that the degradation evolution is very sensitive to the ambient temperature so that with increase in ambient temperature from 25 0C to 75 0C, the fatigue life 34% decreased for the solder joints. A handy equation was also given to predict the fatigue life in the mentioned ambient temperature. The simulation outcomes also revealed that with increase in solder layer thickness, the fatigue life improved which is due to the lower accumulated strain energy per volume in the solder material. Moreover, SEM micrographs, from experimental fatigue test, indicated that the damage evolution was accompanied with the appearance of elemental heterogeneity and void coalescence in the solder joints. The X-ray diffraction test also showed that the decrease in solder thickness leads to the intensification of intermetallic compounds formation at the interface.
1 November 2018 in IEEE Transactions on Device and Materials Reliability
This paper demonstrates the feasibility of low cycle fatigue effects on the thermo-mechanical fatigue evolution in the solder joints of a power module. To achieve this goal, FEM simulation and experimental studies have been carried out. One of the prepared samples was exposed to the sole thermal cycling while another one underwent frequent drop impacts, as indicator of low cycle fatigue event, during the thermal cycling. The FEM results indicate that the thermal cycling leads to the accumulated creep strain in the solder joints. The amount of creep strain considerably increases when the drop impacts are coupled to the thermal cycling. This phenomenon is due to the additional peeling stress applied by drop impacts to the solder joints. It is also revealed that with an increase in the number of drop impacts, the rate of strain accumulation declines which may be due to the restriction of changes led by stress triaxiality. The fractography also validates that the sample exposed to both drop and thermal loadings shows an entire brittle fracture mode. Moreover, the EDS map shows that the elemental distribution heterogeneity and intermetallic growth were created under mutual effects of drop impacts and thermal cycle fatigue.
With evolution of the smart things, to acquire data, gateways play a major role in interconnecting with various sensor nodes. Using different wireless protocols and standards with sensor nodes, gateway can transform information into a unique format that transmits into the cloud for further use. Which accepts the commands from external users in the remote location through a personal computer or a smartphone? The proposed gateway has its added advantages; (i) ZigBee and Wi-Fi wireless technologies connectivity is enabled, (ii) transforms the information into required protocol format, (iii) uses a light weighted MQTT protocol in transmitting and receiving environment, (iv) It provides the storage and analyzed data and (v) the sensor values can be observed and the devices can be controlled by a smartphone from remote location. Here we demonstrate the proof of concept for controlling the smart home appliances. This also represents a design and implementation of Bi-Directional IoT gateway using ZigBee and Wi-Fi technologies with MQTT protocol.