Chokri Baccouch

Dr. Chokri Baccouch

SYS’COM Laboratory National Engineering School of Tunis, Tunis El Manar University, B.P. 37, Le Belvédère
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 October 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
ITIkram Troudi
Ikram Troudi
CBChokri Baccouch
Chokri Baccouch
BCBelgacem Chibani
Belgacem Chibani
AZAhmed Zouinkhi
Ahmed Zouinkhi
AFAymen Flah
Aymen Flah
MOMonia Oueder
Monia Oueder
This research explores the integration of Frequency Selective Surfaces (FSS) with Multiple-Input Multiple-Output (MIMO) antennas to enhance communication performance in Internet of Things (IoT) and Vehicle-to-Vehicle (V2V) applications operating at 5.9 GHz. Unlike existing Literature where various FSS structures are employed for performance improvement, this study presents An innovative approach by integrating a decagonal FSS unit cell with a dug-hex microstrip antenna design. The key contributions of this work include significant performance improvements, such as a gain enhancement from 1.46 dB to 6.42 dB for the single-port antenna (32 mm × 24 mm × 1.6 mm), efficiency exceeding 87.45%, And a bandwidth of 738.86 MHz. For the quad-element MIMO antenna (50 mm × 50 mm × 1.6 mm), the FSS integration results in a gain increase from 2.7 dBi to 7.4 dBi across all ports, while also improving frequency selectivity and port isolation. Notably, the MIMO antenna already exhibits good isolation between ports without FSS integration. Experimental validation confirms that the simulated and measured results align closely, demonstrating the effectiveness of the FSS-MIMO integration. This work not only highlights the potential of FSS technology for enhancing antenna performance in IoT and V2V communications but also introduces a novel, compact design that offers significant improvements in gain, efficiency, and bandwidth. The proposed approach is particularly suited for space-constrained environments, providing a valuable contribution to the development of more efficient and robust wireless communication systems, particularly for IoT networks and safer transportation systems.

28 September 2016 in Advanced Electromagnetics
Verified
Journal Article
Open access
PDF file
CBChokri Baccouch
Chokri Baccouch
DBD. Bouchouicha
D. Bouchouicha
Hedi SAKLIHedi SAKLI
Hedi SAKLI
TAT. Aguili
T. Aguili
The present work was to use photovoltaic solar cells in patch antenna structures. The radiating patch element of a patch antenna was replaced by a solar cell. Direct Current (DC) generation remained the original feature of the solar cell, but additionally it was now able to receive and transmit electromagnetic waves. Here, we used a new patch antenna structure based on a photovoltaic solar cell. It was then used to collect photo-generated current as well as Radio Frequency (RF) transmission. A mathematical model which would serve the minimization of power losses of the cell and therefore the improvement in the conversion efficiency was studied. A simulation allowed analysing the performance of the antenna, with a silicon material, and testing its parameters such as the reflection coefficient (S11), gain, directivity and radiated power. The performance analysis of the solar cell patch antenna was conducted using Advanced Design System (ADS) software. Simulation results for this antenna showed a dual resonance frequency of 5.77 GHz and of 6.18 GHz with an effective return loss of -38.22dB and a gain of 1.59dBi.

1 January 2021 in Wireless Communications and Mobile Computing
Verified
Journal Article
Open access
PDF file
CBChokri Baccouch
Chokri Baccouch
CBChayma Bahhar
Chayma Bahhar
Hedi SAKLIHedi SAKLI
Hedi SAKLI
ATAGUILI Taoufik
AGUILI Taoufik
The emergence of new IoT applications in regional and remote areas has increased the need for a global IoT connectivity beyond existing terrestrial network coverage. However, in many cases, it is not economically viable to build a dedicated terrestrial network to cover these remote areas due to population sparsity and the lack of business case. In this paper, we propose a framework for designing a solar rectenna for IoT‐over‐satellite applications using nanosatellites. Utilizing such a framework will allow valuable radio spectrum resources to be shared between satellite and terrestrial users. Thus, the autonomous power supply of these objects becomes a big challenge. Indeed, the harvest of solar energy and the conversion of RF energy into electric voltage are a hot topic. Our contribution consists in offering a solar rectenna system to collect solar and RF energy as well as the radio frequency transmission. A parametric study is carried out to follow the influence on the performance of this system. A topology of rectifying circuits is proposed in the present work. The parametric study has shown that the efficiency RF/DC conversion can reach 23.2% for an input power of 5 dBm and a load resistance of 2 kΩ. To ensure the satellite communication of IoT‐connected autonomous objects, this system is operated in the X or Ku band.

1 December 2024 in International Journal of Electrical and Computer Engineering (IJECE)
Verified
Journal Article
Open access
PDF file
ITIkram Troudi
Ikram Troudi
CBChokri Baccouch
Chokri Baccouch
RCRhaimi Belgacem Chibani
Rhaimi Belgacem Chibani
This research investigates the application of frequency selective surface (FSS) reflectors to enhance vehicle-to-vehicle (V2V) communication performance. A compact antenna measuring 32×24×1.6 mm, derived from an FSS 10×10×1.6 mm unit cell, was studied. Integration of FSS technology with the antenna resulted in significant performance improvements. The gain increased from 3.9 to 5.4 dB at 5.9 GHz, representing a 1.5-fold enhancement. Additionally, the bandwidth extended to 230.94 MHz. These advancements demonstrate the efficacy of FSS technology for antenna gain enhancement in V2V systems. The compact design, coupled with improved performance, makes this approach particularly suitable for vehicular applications where space is limited. This study not only showcases the potential of FSS technology in antenna design but also suggests its broader applicability in enhancing V2V communication systems, potentially contributing to the development of more efficient and safer transportation networks.

31 December 2025 in Intellectual Journal of Energy Harvesting and Storage
Verified
Journal Article
Open access
PDF file
SOSaleh Omar
Saleh Omar
CBChokri Baccouch
Chokri Baccouch
BRBelgacem Chibani Rhaimi
Belgacem Chibani Rhaimi
This paper presents the design and simulation of a novel hammer-shaped slotted microstrip patch antenna optimized for operation at 27 GHz. The proposed antenna structure features a truncated ground plane and is tailored to support wideband applications in the millimeter-wave (mmWave) frequency spectrum. Key performance parameters such as return loss (S11), voltage standing wave ratio (VSWR), far-field radiation characteristics, and gain are thoroughly analyzed. Simulation results show that the antenna achieves a wide operating bandwidth from 24.5 GHz to 30.9 GHz, with a peak gain of 6.35 dB and an excellent return loss of −37.8 dB at the central frequency. These promising results suggest that the antenna is well-suited for high-frequency applications such as 5G and radar systems.

31 December 2025 in Intellectual Journal of Energy Harvesting and Storage
Verified
Journal Article
Open access
PDF file
ITIkram Troudi
Ikram Troudi
CBChokri Baccouch
Chokri Baccouch
RCRhaimi Belgacem Chibani
Rhaimi Belgacem Chibani
This paper presents the design, optimization, and simulation of a compact meshed antenna integrated with a photovoltaic (PV) cell for simultaneous Ku-band wireless communication and solar energy harvesting. The proposed structure leverages the front metallic grid of the solar cell as both a radiating patch and an energy-collecting surface, enabling compact, and autonomous radio frequency (RF) operation. A comprehensive mathematical model was developed to minimize key loss mechanisms—including series resistance, contact resistance, metal resistivity, and optical shadowing—associated with the grid geometry. The optimization process identified an optimal finger width of 28 μm that maximized energy conversion efficiency while maintaining high-quality RF radiation. The antenna is implemented on a multilayer silicon substrate and operates at a resonant frequency of 16.55 GHz with a simulated −10 dB bandwidth of 390 MHz. A peak gain of 4.24 dBi and a directivity of 8.67 dB were achieved. An RF/direct current (DC) decoupling circuit was also integrated to ensure functional independence between the energy harvesting and communication subsystems, with negligible impact on return loss. This dual-function system offers a promising solution for the development of compact, energy-autonomous wireless platforms, particularly suited for internet of things (IoT) applications, smart infrastructure, and remote sensing in space-constrained environments.