The combined optimization of Savitzky-Golay (SG) smoothing and multiplicative scatter correction (MSC) were discussed based on the partial least squares (PLS) models in Fourier transform near-infrared (FT-NIR) spectroscopy analysis. A total of 5 cases of separately (or combined) using SG smoothing and MSC were designed and compared for optimization. For every case, the SG smoothing parameters were optimized with the number of PLS latent variables (), with an expanded number of smoothing points. Taking the FT-NIR analysis of soil organic matter (SOM) as an example, the joint optimization of SG smoothing and MSC was achieved based on PLS modeling. The results showed that the optimal pretreatment was successively using SG smoothing and MSC, in which the SG smoothing parameters were 4th degree of polynomial, 2nd-order derivative, and 67 smoothing points, the best corresponding , RMSEP, and were 7, 0.3982 (%), and 0.8862, respectively. This result was far better than those without any pretreatment. The combined optimization of SG smoothing and MSC could obviously improve the modeling result for NIR analysis of SOM. In addition, a new method for the classification of calibration and prediction was proposed by normalization principle. The optimizations were done on this basis of this classification.
The combination of modified optical path length estimation and correction (OPLECm) and moving window partial least squares (MWPLS) was applied to the waveband selection for the Fourier transform near-infrared (FT-NIR) determination of pectin in shaddock peel samples. For MWPLS modeling, the changeable parameter of waveband width was set as the 21 piece-window size selected by the piece-wise multiplicative scatter correction (PMSC) method. Further, OPLECm was implemented for multiplicative scattering correction, and the MWPLS models were optimized by comparing the predictive results of three different cases using OPLECm pretreatment. The optimum case was PLS modeling based on the waveband selected by a moving window and successively pretreated by OPLECm (MW + OPLECm + PLS). The selected waveband was 8573–7784 cm−1 with a width of 410. The optimal number of PLS components was 11, and the corresponding RMSEP, the RP, and RRMSEP were 0.4176 wt%, 0.9185, and 8.43%, respectively. This model was better than other models for MW + OPLECm + PLS. The optimally selected waveband also showed an appreciative result in the validation part. This indicates that MWPLS modeling combined with OPLECm provides an appreciable improvement in the FT-NIR quantitative analysis of pectin in shaddock peel. In addition, a method was proposed for the classification of calibration samples and the prediction samples based on the principles of vector normalization, and all the calibration models and the prediction results were obtained on this classification.
15 June 2016 in Journal of Nonlinear Sciences and Applications