Obtaining an overview of the spatial and temporal distribution of seabed sediments is of high interest for multiple research disciplines. Multibeam echosounders allow for the mapping of seabed sediments with high area coverage. In this paper, the repeatability of acoustic classification derived from multibeam echosounder backscatter is addressed. To this end, multibeam echosounder backscatter data acquired on the Cleaver Bank (North Sea) during five different surveys is employed using two different classification methods, i.e., a method based on the principal component analyses and the Bayesian technique. Different vessels were used for the different surveys. The comparison of the classification results between the different surveys indicates good repeatability. This repeatability demonstrates the potential of using backscatter for long-term environmental monitoring. However, the use of different classification methods results in somewhat different classification maps. Monitoring, therefore, requires the consistent use of a single method. Furthermore, it is found that the statistical characteristics of backscatter is such that clustering algorithms are less suited to discern the number of sediment types present in the study area. The Bayesian technique accounting for backscatter statistics is therefore recommended. A strong positive correlation between backscatter and median grain size for finer sediments (0.5 mm. Consequently, for the situation considered a unique assignment of sediment type to acoustic class is not possible for these coarser sediments.

High resolution maps of sandy seafloors are valuable to understand seafloor dynamics, plan engineering projects, and create detailed benthic habitat maps. This paper presents multibeam echosounder backscatter classification results of the Brown Bank area of the North Sea. We apply the Bayesian classification method in a megaripple and sand wave area with significant slopes. Prior to the classification, corrections are implemented to account for the slopes. This includes corrections on the backscatter value and its corresponding incident angle. A trade-off in classification resolutions is found. A higher geo-acoustic resolution is obtained at the price of losing spatial resolution, however, the Bayesian classification method remains robust with respect to these trade-off decisions. The classification results are compared to grab sample particle size analysis and classified video footage. In non-distinctive sedimentary environments, the acoustic classes are not attributed to only the mean grain size of the grab samples but to the full spectrum of the grain sizes. Finally, we show the Bayesian classification results can be used to characterize the sedimentary composition of megaripples. Coarser sediments were found in the troughs and on the crests, finer sediments on the stoss slopes and a mixture of sediments on the lee slopes.

In this paper, object-based image analysis classification methods are developed that do not rely on backscatter in order to classify the seafloor. Instead, these methods make use of bathymetry, bathymetric derivatives, and grab samples for classification. The classification is performed on image object statistics. One of the methods utilizes only texture-based features, that is, features that are related to the spatial arrangement of image characteristics. The second method is similar, but relies on a wider set of image object features. The methods were developed and tested using a dataset from Norwegian waters, specifically the Røstbanken area off the coast of Lofoten. The classification results were compared to backscatter-based classification and to grab sample ground-reference data. The algorithm that performed the best was then also applied to a dataset from the Borkumer Stones area close to the island of Schiermonnikoog in Dutch waters. This allowed testing the applicability of the algorithm for different datasets. Because the algorithms that were developed do not require backscatter, the availability of which is much more scarce than bathymetry, and because of the low computational requirements, they could be applied to any area where high-resolution bathymetry and grab samples are available.

Seafloor characterization using multibeam echosounder (MBES) backscatter data is an active field of research. The observed backscatter curve (OBC) is used in an inversion algorithm with available physics-based models to determine the seafloor geoacoustic parameters. A complication is that the OBC cannot directly be coupled to the modeled backscatter curve (MBC) due to the correction of uncalibrated sonars. Grab samples at reference areas are usually required to estimate the angular calibration curve (ACC) prior to the inversion. We first attempt to estimate the MBES ACC without grab sampling by using the least squares cubic spline approximation method implemented in a differential evolution optimization algorithm. The geoacoustic parameters are then inverted over the entire area using the OBCs corrected for the estimated ACC. The results indicate that a search for at least three geoacoustic parameters is required, which includes the sediment mean grain size, roughness parameter, and volume scattering parameter. The inverted mean grain sizes are in agreement with grab samples, indicating reliability and stability of the proposed method. Furthermore, the interaction between the geoacoustic parameters and Bayesian acoustic classes is investigated. It is observed that higher backscatter values, and thereby higher acoustic classes, should not only be attributed to (slightly) coarser sediment, especially in a homogeneous sedimentary environment such as the Brown Bank, North Sea. Higher acoustic classes should also be attributed to larger seafloor roughness and volume scattering parameters, which are not likely intrinsic to only sediment characteristics but also to other contributing factors.