Carbon deposition on Ni-based anode is well-known as a major barrier for the practical use and commercialization of hydrocarbon-fuelled solid oxide fuel cells (SOFCs). In this work, Co alloying in Ni-YSZ was studied as an alternative anode material for using CH4 as a fuel. The Ni-YSZ and Ni-Co alloyed-YSZ were prepared by the traditional impregnation method without further mixing processes. After sintering and reduction in H2 atmosphere, the introduced Co can completely dissolved into the Ni lattice and changed the morphology with an increase in the Ni-YSZ grain size and showed a better uniform microstructure. The Co alloying also enhanced the electrochemical performance under CH4 fuel by reducing the resistance and anodic overvoltage. Moreover, the Co addition enhanced the stability of the cell with CH4 a constant load current of 80 mA for 60 h. This performance related to the carbon deposition on the anode surface. The Co alloying showed a high efficiency to suppress the carbon deposition and improved the electrochemical performance of an SOFC cell operating under CH4 fuel.
To avoid the proneness to degradation due to coking in the operation of solid oxide fuel cells (SOFCs) directly running on methane (CH4) fuels, a modified porous anode of the Ni1−XCoX/YSZ (yttria-stabilized zirconia) cermet prepared by an impregnation method is presented. The influence of the Co alloying content on the cermet microstructure, SOFC characteristics, and prolonged cell performance stability has been studied. Co was incorporated into Ni and formed a solid solution of Ni1−XCoX alloy connected with the YSZ as the cermet anode. The porous microstructure of the Ni1−XCoX/YSZ cermet anode formed by sintering exhibited a grain growth with an increase in the Co alloying content. The electrochemical performance of the cells consisting of the Ni1−XCoX/YSZ cermet anode, the YSZ electrolyte, and the LSM (La0.8Sr0.2MnO3) cathode showed an enhancement by the Ni1−XCoX impregnation treatment for the respective supply of H2 and CH4 to the anode. The cell using the Ni0.75Co0.25/YSZ cermet anode (the Ni0.75Co0.25 cell) showed the highest cell performance among the cells tested. In particular, the performance enhancement of this cell was found to be more significant for CH4 than that for H2; a 45% increase in the maximum power density for CH4 and a 17% increase for H2 at 750 °C compared with the performance of the cell using the Ni/YSZ cermet anode. Furthermore, the prolonged cell performance stability with a continuous CH4 supply was found for the Ni0.85Co0.15 and Ni0.75Co0.25 cells at least for 60 h at 750 °C. These enhancement effects were caused by the optimum porous microstructure of the cermet anode with the low anodic polarization resistance.