In the past, different approaches for automated landslide identification based on multispectral satellite remote sensing were developed to focus on the analysis of the spatial distribution of landslide occurrences related to distinct triggering events. However, many regions, including southern Kyrgyzstan, experience ongoing process activity requiring continual multi-temporal analysis. For this purpose, an automated object-oriented landslide mapping approach has been developed based on RapidEye time series data complemented by relief information. The approach builds on analyzing temporal NDVI-trajectories for the separation between landslide-related surface changes and other land cover changes. To accommodate the variety of landslide phenomena occurring in the 7500 km² study area, a combination of pixel-based multiple thresholds and object-oriented analysis has been implemented including the discrimination of uncertainty-related landslide likelihood classes. Applying the approach to the whole study area for the time period between 2009 and 2013 has resulted in the multi-temporal identification of 471 landslide objects. A quantitative accuracy assessment for two independent validation sites has revealed overall high mapping accuracy (Quality Percentage: 80%), proving the suitability of the developed approach for efficient spatiotemporal landslide mapping over large areas, representing an important prerequisite for objective landslide hazard and risk assessment at the regional scale.

Agricultural vegetation development and harvest date monitoring over large areas requires frequent remote sensing observations. In regions with persistent cloud coverage during the vegetation season this is only feasible with active systems, such as SAR, and is limited for optical data. To date, optical remote sensing vegetation indices are more frequently used to monitor agricultural vegetation status because they are easily processed, and the characteristics are widely known. This study evaluated the correlations of three Sentinel-2 optical indices with Sentinel-1 SAR indices over agricultural areas to gain knowledge about their relationship. We compared Sentinel-2 Normalized Difference Vegetation Index, Normalized Difference Water Index, and Plant Senescence Radiation Index with Sentinel-1 SAR VV and VH backscatter, VH/VV ratio, and Sentinel-1 Radar Vegetation Index. The study was conducted on 22 test sites covering approximately 35,000 ha of four different main European agricultural land use types, namely grassland, maize, spring barley, and winter wheat, in Lower Saxony, Germany, in 2018. We investigated the relationship between Sentinel-1 and Sentinel-2 indices for each land use type considering three phenophases (growing, green, senescence). The strength of the correlations of optical and SAR indices differed among land use type and phenophase. There was no generic correlation between optical and SAR indices in our study. However, when the data were split by land use types and phenophases, the correlations increased remarkably. Overall, the highest correlations were found for the Radar Vegetation Index and VH backscatter. Correlations for grassland were lower than for the other land use types. Adding auxiliary data to a multiple linear regression analysis revealed that, in addition to land use type and phenophase information, the lower quartile and median SAR values per field, and a spatial variable, improved the models. Other auxiliary data retrieved from a digital elevation model, Sentinel-1 orbit direction, soil type information, and other SAR values had minor impacts on the model performance. In conclusion, despite the different nature of the signal generation, there were distinct relationships between optical and SAR indices which were independent of environmental variables but could be stratified by land use type and phenophase. These relationships showed similar patterns across different test sites. However, a regional clustering of landscapes would significantly improve the relationships.

As climate change progresses, urban areas are increasingly affected by water scarcity and the urban heat island effect. Evapotranspiration (ET) is a crucial component of urban greening initiatives of cities worldwide aimed at mitigating these issues. However, ET estimation methods in urban areas have so far been limited. An expanding number of flux towers in urban environments provide the opportunity to directly measure ET by the eddy covariance method. In this study, we present a novel approach to model urban ET by combining flux footprint modeling, remote sensing and geographic information system (GIS) data, and deep learning and machine learning techniques. This approach facilitates spatio-temporal extrapolation of ET at a half-hourly resolution; we tested this approach with a two-year dataset from two flux towers in Berlin, Germany. The benefit of integrating remote sensing and GIS data into models was investigated by testing four predictor scenarios. Two algorithms (1D convolutional neural networks (CNNs) and random forest (RF)) were compared. The best-performing models were then used to model ET values for the year 2019. The inclusion of GIS data extracted using flux footprints enhanced the predictive accuracy of models, particularly when meteorological data was more limited. The best-performing scenario (meteorological and GIS data) showed an RMSE of 0.0239 mm/h and R2 of 0.840 with RF and an RMSE of 0.0250 mm/h and a R2 of 0.824 with 1D CNN for the more vegetated site. The 2019 ET sum was substantially higher at the site surrounded by more urban greenery (366 mm) than at the inner-city site (223 mm), demonstrating the substantial influence of vegetation on the urban water cycle. The proposed method is highly promising for modeling ET in a heterogeneous urban environment and can support climate change mitigation initiatives of urban areas worldwide.

Urban areas tend to be warmer than their rural surroundings, well-known as the "urban heat island" effect. Higher nocturnal air temperature (Tair) is associated with adverse effects on human health, higher mortality rates, and higher energy consumption. Prediction of the spatial distribution of Tair is a step towards the "Smart City" concept, providing an early warning system for vulnerable populations. The study of the spatial distribution of urban Tair was thus far limited by the low spatial resolution of traditional data sources. Volunteered geographic information (VGI) provides alternative data with higher spatial density, with citizen weather stations monitoring Tair continuously in hundreds or thousands of locations within a single city. In this study, the aim was to predict the spatial distribution of nocturnal Tair in Berlin, Germany, one day in advance at a 30-m resolution using open-source remote sensing and geodata from Landsat and Urban Atlas, crowdsourced Tair data, and machine learning (ML) methods. Results were tested with a "leave-one-date-out" training scheme (testingcrowd) and reference Tair data (testingref). Three ML algorithms were compared - Random Forest (RF), Stochastic Gradient Boosting (GBM), and Model Averaged Neural Network (avNNet). The optimal model based on accuracy and computational speed is RF, with an average RMSE for testingcrowd of 1.16°C (R2 = 0.512) and RMSE for testingref of 1.97°C (R2 = 0.581). Overall, the most important GIS predictors were morphometric parameters and albedo. The proposed method relies on open-source datasets and can, therefore, be adapted to many cities worldwide.

Spatial monitoring tools are necessary to respond to the threat of global biodiversity loss. At the European scale, remote sensing tools for NATURA 2000 habitat monitoring have been requested by the European Commission to fulfill the obligations of the EU Habitats Directive. This paper introduces a method by which swath events in semi-natural grasslands can be detected from multi-temporal TerraSAR-X data. The investigated study sites represent rare and endangered habitats (NATURA 2000 codes 6410, 6510), located in the Döberitzer Heide nature conservation area west of Berlin. We analyzed a time series of 11 stripmap images (HH-polarization) covering the vegetation period affected by swath (June to September 2010) at a constant 11-day acquisition rate. A swath detection rule was established to extract the swath events for the NATURA 2000 habitats as well as for six contrasting pasture sites not affected by swath. All swath events observed in the field were correctly allocated. The results indicate the potential to allocate semi-natural grassland swath events to 11-day-periods using TerraSAR-X time series. Since the conservation of semi-natural grassland habitats requires compliance with specific swath management rules, the detection of swath events may thus provide new parameters for the monitoring of NATURA 2000 grassland habitats.

Reliable multi-temporal landslide detection over longer periods of time requires multi-sensor time series data characterized by high internal geometric stability, as well as high relative and absolute accuracy. For this purpose, a new methodology for fully automated co-registration has been developed allowing efficient and robust spatial alignment of standard orthorectified data products originating from a multitude of optical satellite remote sensing data of varying spatial resolution. Correlation-based co-registration uses world-wide available terrain corrected Landsat Level 1T time series data as the spatial reference, ensuring global applicability. The developed approach has been applied to a multi-sensor time series of 592 remote sensing datasets covering an approximately 12,000 km² area in Southern Kyrgyzstan (Central Asia) strongly affected by landslides. The database contains images acquired during the last 26 years by Landsat (E)TM, ASTER, SPOT and RapidEye sensors. Analysis of the spatial shifts obtained from co-registration has revealed sensor-specific alignments ranging between 5 m and more than 400 m. Overall accuracy assessment of these alignments has resulted in a high relative image-to-image accuracy of 17 m (RMSE) and a high absolute accuracy of 23 m (RMSE) for the whole co-registered database, making it suitable for multi-temporal landslide detection at a regional scale in Southern Kyrgyzstan.