Bilateral teleoperation system has raised expansive concern as it's excellent behaviors in executing the tasks in the remote, unstructured and dangerous areas via the cooperative operation systems. In this paper, an RBF-neural-network-based adaptive robust control design is proposed for nonlinear bilateral teleoperation manipulators to cope with the main issues including the communication time delay, various nonlinearities and uncertainties. Specifically, the slave environmental dynamics is modeled by a general RBF neural network, and its parameters are estimated and then transmitted for the environmental torque reconstruction in the master side. Since the parameters of neural network (which are non-power signals) are transmitted instead of the traditional environmental torque in the communication channel, the previous existing passivity problem under time delay is avoided. In both of master and slave sides, the trajectory creators are applied to generate the desired trajectories, and the RBF-neural-network-based adaptive robust controllers are designed subsequently to handle the nonlinearities and uncertainties. Theoretically, the proposed control algorithm can guarantee the global stability of bilateral teleoperation manipulators under time delay, and the good transparency performance with both position tracking and force feedback is also achieved simultaneously. The real platform comparative experiments are carried out, and the results show the good position tracking to execute precise operation and the good force feedback to detect the sudden disturbance in the environment dynamics.

Multilateral tele-robotic system have potential applications in the industry environments with the advantages of cooperative manipulation for the remote and hazardous tasks, and its control design is quite challenging due to several coupling issues such as stability, position tracking, force feedback and cooperative manipulation under time delays, various uncertainties and external disturbance. In this paper, a novel RBFNN ( $Radial\ Basis\ Function\ Neural\ Network$ )-based adaptive sliding mode control design is proposed for nonlinear multilateral tele-robotic system with $n$ -master- $n$ -slave manipulators. The environment force is modeled with a general form via the RBFNN-based environment parameters estimation in the slave side. The estimated environment parameters (non-power signals) are transmitted to rebuild the environment dynamics in the master side and provide the good force feedback for the human operators. The RBFNN-based adaptive sliding mode controllers are designed separately for master and slave manipulators to achieve good position tracking under parameter variations and external disturbance. The coordinated force distribution algorithm is designed to achieve cooperative manipulation with the balance of force acting on the target object. The theoretical analysis is given and the comparative experiment for a nonlinear multilateral tele-robotic system with 2-master-2-slave manipulators is implemented. The results show the good performance of our design.

Underwater manipulators are important robotic tools in the exploration of the ocean environment. Up to now, most existing underwater manipulators are rigid and with fixed 5 or 7 degrees of freedom (DOF), which may not be very suitable for some complicated underwater scenarios (e.g., pipe networks, narrow deep cavities, etc.). The biomimetic concept of muscles and tendons is also considered as continuum manipulators, but load capacity and operation accuracy are their essential drawbacks and thus limit their practical applications. Recently, the cable-driven technique has been developed for manipulators, which can include numerous joints and hyper-redundant DOF to execute tasks with dexterity and adaptability and thus they have strong potential for these complex underwater applications. In this paper, the design of a novel cable-driven hyper-redundant manipulator (CDHRM) is introduced, which is driven by multiple cables passing through the tubular structure from the base to the end-effector, and the joint numbers can be extended and decided by the specific underwater task requirements. The kinematic analysis of the proposed CDHRM is given which includes two parts: the cable-joint kinematics and the joint-end kinematics. The geometric relationship between the cable length and the joint angles are derived via the established geometric model for the cable-joint kinematics, and the projection relationship between the joint angles and end-effector’s pose is established via the spatial coordinate transformation matrix for the joint-end kinematics. Thus, the complex mapping relationships among the cables, joints and end-effectors are clearly achieved. To implement precise control, the kinematic control scheme is developed for the CDHRM with series-parallel connections and hyper-redundancy to achieve good tracking performance. The experiment on a real CDHRM system with five joints is carried out and the results verify the accuracy of kinematics solution, and the effectiveness of the proposed control design. Particularly, three experiments are tested in the underwater environment, which verifies its good tracking performance, load carrying and grasping capacity.

The cooperative motion of multiple mobile robots has attracted wide attention due to its advantages in military, marine and aerospace fields, and formation control has become a significant technology in the realization of these tasks. However, most of the existing formation control designs of mobile robots do not consider the practical obstacles in the environment, and the maintenance of both formation and trajectory tracking while confronting the obstacles is still a challenging issue. Therefore, in this paper, a virtual-structure-based formation control approach is designed with obstacle avoidance for a system with multiple mobile robots. The basic trajectory is generated for each robot in the group and parameterized to keep the group in formation. A trajectory generator is then established regarding the obstacles, where a potential function is designed to adjust the basic trajectory and replan the reference trajectory to achieve obstacle avoidance. Then, a novel design for the path parameter is proposed to improve the performance of the robot group when encountering obstacles. Finally, a tracking controller is designed to achieve good tracking performance for robots, and the guaranteed performance is achieved via the Lyapunov theorem. A comparative simulation with three sets is carried out, where an objective function $F_{obj}$ is designed to evaluate the tracking performance in the presence of obstacles. Besides this, a real experiment is implemented to further verify the effectiveness. The simulation and experimental results verify the good formation and tracking performance of the proposed design for a system with multiple mobile robots with obstacle avoidance.

Bilateral teleoperation technique has drew much attention with its attractive superiority to implement the tasks in hazardous environments. Transmission delays and uncertainties are the two main challenges in the nonlinear bilateral teleoperation system to guarantee stability and achieve good transparency performance (including position tracking and force feedback) simultaneously. In this paper, an RBFNN-based adaptive sliding mode control design is developed for nonlinear bilateral teleoperation system with transmission delays and uncertainties. For details, the reference trajectory producer is designed in both the master and slave sides, and produce the passive reference trajectories for the tracking of master/slave manipulators. The RBFNN-based adaptive sliding mode controller is designed separately for the master and slave to achieve the good tracking performance under system uncertainties. To mitigate the negative effect of transmission delays on the system’s stability, a projection mapping by saturation function is applied in the master side to guarantee the boundedness of the delayed environmental torque. Thus, the global stability and good transparency performance with both position tracking and force feedback can be simultaneously achieved for our proposed method. The comparative experiment is carried out and the results show the significant performance improvement with our proposed control design.