In recent years, increasing attention has been paid to the collapse failures of long-span continuous rigid-frame bridges under strong earthquake excitations. This paper presents the results of a study in which a 1:15 scaled two-span prestressed concrete continuous rigid-frame bridge model with box-type piers was tested using the shake-table array test system to investigate the seismic response characteristics. Two nonlinear finite-element (FE) models were constructed. The first was a single-girder model that was used to simulate the seismic response under weak seismic waves. The second was an explicit dynamic FE model that was used to simulate the collapse and failure mechanisms of the scaled bridge under strong earthquakes. Testing revealed that the response of the central pier of the prestressed concrete continuous rigid-frame bridge was the largest under seismic excitation, and the damage first appeared at the lower end of the central pier in all cases. The numerical simulations revealed that t...
15 July 2020 in Earthquake Engineering and Engineering Vibration
To meet the demand for high-precision recognition and real-time processing when using intelligent detection methods in daily concrete bridge crack detection tasks, a high-precision lightweight crack image recognition method based on knowledge distillation is proposed. Through semisupervised learning, the information embedded in unlabeled data is used to train a lightweight network to obtain high-precision crack recognition results. First, by comparing the recognition accuracy of lightweight network under different training strategies, the effectiveness of the knowledge distillation method in improving the accuracy of lightweight network is verified. Second, a label-free knowledge distillation method for engineering detection is proposed. Finally, using MobileNetv3 as the student model, under the self-built three-classification dataset of nearly 700,000 images, the accuracy reached 99.84% through the proposed knowledge distillation method, which is very close to the teacher model ResNeXt101 accuracy (−0.08%), and MobileNetv3 compared with ResNeXt101 its model inference speed increased by more than 13 times. At the same time, the MobileNetv3 model improves the inference speed by more than 13 times and reduces the number of model parameters by more than 35 times compared to the ResNeXt101 model. The research results fully demonstrate that under the premise of having a large amount of unlabeled data, using the proposed knowledge distillation method, the recognition accuracy of the trained lightweight model has a significant advantage over the existing lightweight network training strategies.
The large degradation of the mechanical performance of hollow reinforced concrete (RC) bridge piers subjected to multi-dimensional earthquakes has not been thoroughly assessed. This paper aims to improve the existing seismic damage model to assess the seismic properties of tall, hollow RC piers subjected to pseudo-static, biaxial loading. Cyclic bilateral loading tests on fourteen 1/14-scale pier specimens with different slenderness ratios, axial load ratios, and transverse reinforcement ratios were carried out to investigate the damage propagation and the cumulative dissipated energy with displacement loads. By considering the influence of energy dissipation on structural damage, a new damage model (M-Usami model) was developed to assess the damage characteristics of hollow RC piers. The results present four consecutive damage stages during the loading process: (a) cracking on concrete surface, (b) yielding of longitudinal reinforcements; (c) spalling of concrete, and (d) collapsing of pier after the concrete crushed and the longitudinal bars ruptured due to the flexural failure. The damage level caused by the seismic waves can be reduced by designing specimens with a good seismic energy dissipation capacity. The theoretical damage index values calculated by the M-Usami model agreed well with the experimental observations. The developed M-Usami model can provide insights into the approaches to assessing the seismic damage of hollow RC piers subjected to bilateral seismic excitations.
The continuous girder bridge is the main type of small- and medium-sized bridges; however, it has poor collapse resistance and suffers frequent earthquake damage. In order to grasp its collapse mechanism and clarify the internal and external factors affecting its collapse resistance, a 1:3-scaled, two-span bridge model subjected to shaking table test research was taken as the research object. The factors such as seismic characteristics, multi-directional seismic coupling, span, pier height, and structural system type were analyzed to determine the influences on the collapse mode of the bridge. The numerical results showed that different ground motion characteristics led to different collapse modes. Vertical ground motion had little effect on the structural response of the bridge. The change of span and pier height significantly changed the collapse resistance. A seismic isolation design could improve the anti-collapse performance, but the collapse mode varied with the system. The final anti-collapse design suggestions could provide reference for the seismic reinforcement of existing continuous girder bridges and the seismic design of continuous girder bridges that will be constructed.