Remarkable research activities and major advances have been occurred over the past decade in multiuser multiple-input multiple-output (MU-MIMO) systems. Several transmission technologies and precoding techniques have been developed in order to exploit the spatial dimension so that simultaneous transmission of independent data streams reuse the same radio resources. The achievable performance of such techniques heavily depends on the channel characteristics of the selected users, the amount of channel knowledge, and how efficiently interference is mitigated. In systems where the total number of receivers is larger than the number of total transmit antennas, user selection becomes a key approach to benefit from multiuser diversity and achieve full multiplexing gain. The overall performance of MU-MIMO systems is a complex joint multi-objective optimization problem since many variables and parameters have to be optimized, including the number of users, the number of antennas, spatial signaling, rate and power allocation, and transmission technique. The objective of this literature survey is to provide a comprehensive overview of the various methodologies used to approach the aforementioned joint optimization task in the downlink of MU-MIMO communication systems.

Cell-free massive multiple-input multiple-output (CF mMIMO) can be considered as a potential physical layer technology for future wireless networks since it can benefit from all the advantages of distributed antenna systems (DASs) and network MIMOs, such as macro-diversity gain, high channel capacity, and link reliability. CF mMIMO systems offer remarkable spatial degrees of freedom and array gains to mitigate the inherent inter-cell interference (ICI) of cellular networks. In such networks, several distributed access points (APs) together with precoding/detection processing can serve many users while sharing the same time-frequency resources. Each AP can be equipped with single or multiple antennas, and hence, can provide a consistently adequate service to all users regardless of their locations in the network. This paper presents a detailed overview of the current state-of-the-art on CF systems. First, it performs a literature review of the conventional CF and scalable user-centric (UC) CF mMIMO systems in terms of the limited capacity of the fronthaul links and the connection between APs and user equipments (UEs). As beyond networks will rely on higher frequency bands, it is of paramount importance to discuss the impact of beamforming techniques that are being investigated. Finally, some of the CF promising enabling technologies are presented to emphasize the main applications in these networks.

Network densification through the deployment of small cells along the coverage area of a macro-cell, employing massive multiple input multiple output (MIMO) and millimeter-wave (mmWave) technologies, is a key approach to enhancing the network capacity and coverage of future systems. For ultra-dense mmWave heterogeneous scenarios with a massive number of users, one should address both inter- and intra-tier interferences contrary to the low-density scenarios, where the network is mainly noise limited. Therefore, this paper proposes low complex hybrid analog–digital receive and transmit beamforming techniques for ultra-dense uplink massive MIMO mmWave heterogeneous systems to efficiently mitigate these interferences. At the small cells, the hybrid analog–digital receive beamforming/equalizer is computed in a distributed fashion, where the analog processing is performed at the small cell base stations or access points and the digital part at a central unit for joint processing. To optimize the analog part of the hybrid equalizer and the precoders used at the user terminals, we consider as a metric the distance relative to the fully digital counterpart induced by the Frobenius norm. In the optimization problem, apart from the analog constraints usually considered in the homogeneous systems, we further impose the constraints inherent to the distributed nature of the access points. To cancel the inter-tier interference, the digital parts of the precoders employed at the small cell user terminals are designed so that this interference resides in a low-dimensional subspace at the macro base station. The results show that the performance of the proposed hybrid analog–digital precoder/equalizer scheme is close to the fully digital counterpart and is able to efficiently remove both inter- and intra-tier interferences.

Multicell cooperation is a promising solution for cellular wireless systems to mitigate intercell interference, improve system fairness, and increase capacity. In this article, we propose power allocation techniques for the downlink of distributed, precoded, multicell cellular-based systems. The precoder is designed in two phases: first the intercell interference is removed by applying a set of distributed precoding vectors; then the system is further optimized through power allocation. Three centralized power allocation algorithms with per-BS power constraint and different complexity trade-offs are proposed: one optimal in terms of minimization of the instantaneous average bit error rate (BER), and two suboptimal. In this latter approach, the powers are computed in two phases. First, the powers are derived under total power constraint (TPC) and two criterions are considered, namely, minimization of the instantaneous average BER and minimization of the sum of inverse of signal-to-noise ratio. Then, the final powers are computed to satisfy the individual per-BS power constraint. The performance of the proposed schemes is evaluated, considering typical pedestrian scenarios based on LTE specifications. The numerical results show that the proposed suboptimal schemes achieve a performance very close to the optimal but with lower computational complexity. Moreover, the performance of the proposed per-BS precoding schemes is close to the one obtained considering TPC over a supercell.

The impending spectrum congestion imposed by the emergence of new bandwidth-thirsty applications may be mitigated by the integration of radar and classic communications functionalities in a common system. Furthermore, the merger of a sensing component into wireless communication networks has raised interest in recent years and it may become a compelling design objective for 6G.

The 5G and beyond future wireless networks aim to support a large variety of services with increasing demand in terms of data rate and throughput while providing a higher degree of reliability, keeping the overall system complexity affordable. One of the key aspects regarding the physical layer architecture of such systems is the definition of the waveform to be used in the air interface. Such waveforms must be studied and compared in order to choose the most suitable and capable of providing the 5G and beyond services requirements, with flexible resource allocation in time and frequency domains, while providing high spectral and power efficiencies. In this paper, several beyond 5G waveforms candidates are presented, along with their transceiver architectures. Additionally, the associated advantages and disadvantages regarding the use of these transmission techniques are discussed. They are compared in a similar downlink transmission scenario where three main key performance indicators (KPIs) are evaluated. They are the peak-to-average power ratio, the overall system spectral efficiency (wherein the out of band emissions are measured, along with the spectral confinement of the power spectral density of the transmitted signals) and the bit error rate performance. Additionally, other KPIs are discussed.