The potential of carbon dioxide emissions mitigation in the building sector can be achieved through energy policies, progressive goals, and support systems to attain sustainable constructions that guarantee the reduction of emissions. Net-Zero Energy Buildings (NZEB) is a concept that allows moving forward to neutralize buildings’ carbon emissions. This has been demonstrated by more industrial countries which have set goals and challenges to progressively approach an energy neutrality balance for buildings. Therefore, the target of this research is to define a framework for a new standard to reach NZEB in Chile. Firstly, an exhaustive review of the energy policies, NZEB definitions, and components of an NZEB system took place. Secondly, focus group discussions with local and international professionals from the building sector were organized to define a vision, opportunities, and potential measures with a focus on policies, to implement and develop local technologies for NZEB buildings in Chile. The study identifies the need to advance public policies to achieve an integrated policy for the implementation of energy neutral concept buildings. Finally, the paper presents a NZEB standard framework, including key performance indicators and suggested performance metrics thresholds.
This study investigated the impact of the design of wall systems, mainly made of compressed earth blocks (CEB), on the indoor thermal comfort of naturally ventilated housing in hot climates of Burkina Faso. Conventional housing was modeled and calibrated using the WUFI® Plus dynamic simulation tool based on typical field surveys and the literature. This allowed testing the ability of different wall designs to impact thermal comfort. Thermal discomfort was assessed through an adaptive approach and was based on the annual weighted exceedance hours of overheating. Six designs of walls made of CEB and other locally available materials were simulated and compared to those made of classical hollow concrete blocks. The results of the simulation reveal that the profiles of thermal discomfort vary depending on the wall designs and building spaces. Thus, the wall made, from the outside toward the inside surface, of plywood of 2 cm, an insulation layer of 5 cm and a CEB layer of 29 cm thickness is the most suitable for an annual reduction in overheating for the living room. Regarding the bedroom, the most suitable wall is made of a 14 cm CEB layer, 5 cm insulating layer and 2 cm wood layer from the outside toward the inside surface.