The Weibull distribution is commonly used for clutter modeling as it can provide a good fit to the experimental data over a wide range of conditions, and as such there is considerable attention to the development of constant false alarm rate (CFAR) detectors under such a clutter model assumption. The detection backgrounds of some radar systems are nonhomogeneous, which is a challenging task for CFAR detection. The variability index CFAR (VI-CFAR) detector is proposed for the nonhomogeneous Gaussian clutter in the literature. However, it might increase the false alarm rate significantly in the Weibull clutter due to the target-like clutter samples, and its performance degrades in the nonhomogeneous clutter with the presence of interfering targets at both sides of the cell under test. To address these problems, we propose a robust variability index CFAR detector for the Weibull background (RWVI-CFAR) with known shape parameters in this paper. In the RWVI-CFAR, we extend the VI-CFAR to the Weibull clutter and design an automatic outlier censoring maximum likelihood CFAR (AOCML-CFAR) strategy to improve the detection performance in multiple target situations. The proposed AOCML-CFAR strategy exploits the sparsity of interfering targets to censor the outliers adaptively. By selecting the AOCML-CFAR strategy, the anti-interference capability of the RWVI-CFAR is significantly improved. Simulated and experimental results show the favorable and robust performance of the RWVI-CFAR in the Weibull background.
29 June 2021 in IEEE Transactions on Aerospace and Electronic Systems
Target detection in high-frequency surface-wave radar (HFSWR) systems is a challenging task due to various sources of interference. In this article, we propose a robust constant false alarm rate (CFAR) detector to solve the problem of target detection for the HFSWR by exploiting the prior information on the detection environment. Clutter amplitudes in the HFSWR are commonly assumed to follow the Weibull distribution. Additionally, distribution parameters of the clutter have nonlocal self-similarity, and targets have sparsity as well as a certain geometric structure. We design an objective function based on the Bayesian framework, which consists of a data fidelity term and some regularization terms. Specifically, we use the nonlocal low-rank (NLR) regularization to represent the prior information regarding distribution parameters of clutter, and we adopt the combination of the sparsity and Laplacian regularization to represent the prior information regarding targets. The proposed objective function inherits advantages of the NLR, sparsity, and Laplacian regularization, thereby improving the performance of the proposed detector in the nonhomogeneous clutter. By optimizing the proposed objective function, we obtain estimates of clutter statistics for every cell under test and perform the CFAR detection. Experiments on both simulated data and experimental HFSWR data demonstrate that the proposed detector has a good false alarm regulation property and detection performance in the nonhomogeneous clutter.
7 August 2023 in IEEE Transactions on Geoscience and Remote Sensing
Compared with the classical constant false alarm ratio (CFAR) detector, the neural network (NN) based detector has data-driven representation learning ability, which can improve the detection performance of weak targets in a nonhomogeneous environment. Under the extreme sample imbalance scenario (ESIS) for marine radar, it is difficult to control the probability of false alarm (PFA) by a variable threshold for the network output by adopting the cross-entropy loss function. The Neyman Pearson (NP) criterion is used to find the optimal detector under the constraint of PFA in radar detection and may be used as a loss function for NN to realize false-alarm-controllable detection. However, it is nondifferentiable and cannot be used directly for NN. Therefore, firstly, we theoretically deduce two differentiable-NP loss functions for NNs under the ESIS to realize the NP criterion approximately. Secondly, we theoretically analyze the differentiable-NP loss under the ESIS from the gradient perspective. Thirdly, based on the differentiable-NP loss, we achieve the false-alarm-controllable detection under the ESIS by utilizing a lightweight U-Net segmentation network. Fourthly, to improve the PFA control capability of the segmentation network, we adopt a smaller fixed-size label for each target to reduce the influence of target random size, and we dynamically adjust the regular loss term to diminish the deviation caused by the nondifferentiable operation. The experimental results show that the proposed method can accurately control PFA and get a better detection performance compared to other methods in the measurement data from marine navigation radar.
18 July 2022 in IEEE Wireless Communications Letters
In recent years, channel state information (CSI) has been widely used for Wi-Fi sensing. Most of the existing Wi-Fi sensing researches are conducted based on the CSI matrix. It is noted that since the IEEE 802.11ac standard, beamforming weights feedback will be the only feedback type supported in the mainstream Wi-Fi standards. This letter aims to investigate Wi-Fi sensing based on beamforming weights feedback, where two feedback schemes namely Scheme 1 and Scheme 2 are analyzed and discussed. In Scheme 1, the transmit beamforming matrix (i.e., beamforming weight) is obtained by directly performing eigenvalue decomposition (EVD) on the channel autocorrelation matrix. As for Scheme 2, the transmit beamforming matrix is obtained based on performing EVD on the conjugate transpose of the channel autocorrelation matrix. The analysis shows that Scheme 1 retains the angle of departure (AOD), together with Doppler differences and time delay differences between different paths, while Scheme 2 can retain the entire AOD, Doppler, and time delay information. The effects of imperfect systems on sensing performance in practice are also discussed in this letter.
A constant false alarm rate (CFAR) target detector in non-homogenous backgrounds is proposed. Based on K-sample Anderson-Darling (AD) tests, the method re-arranges the reference cells by merging homogenous sub-blocks surrounding the cell under test (CUT) into a new reference window to estimate the background statistics. Double partition test, clutter edge refinement and outlier elimination are used as an anti-clutter processor in the proposed Modified AD (MAD) detector. Simulation results show that the proposed MAD test based detector outperforms cell-averaging (CA) CFAR, greatest of (GO) CFAR, smallest of (SO) CFAR, order-statistic (OS) CFAR, variability index (VI) CFAR, and CUT inclusive (CI) CFAR in most non-homogenous situations.
14 July 2020 in IEEE Transactions on Geoscience and Remote Sensing
In high-frequency over-the-horizon radar (OTHR), it is a challenging work to detect targets in the nonhomogeneous range-Doppler (RD) map with multitarget interference and sharp/smooth clutter edges. The intensity transition of the clutter edge may be sharp or smooth due to the coexistence of atmospheric noise, sea clutter, and ionospheric clutter in OTHR. The analysis of the RD map shows the spatial correlation among neighboring cell-under-test (CUT) that varies from clutter to clutter. This article proposes an algorithm that uses the spatial relationship to estimate the statistical distribution parameters of every CUT by the adaptive tight frame and the weighted group-sparsity regularization. In the proposed algorithm, the spatial relationship is formulated mathematically by regularization terms and combined with the log-likelihood function of CUTs to construct the objective function. The proposed algorithm is verified by the simulated data and real RD maps collected from both trial sky-wave and surface-wave OTHRs in which it shows robust and improved detection.