Over the last decade, energy demand from the power grid has increased significantly due to the increasing number of users and the emergence of high-power industries. This has led to a significant increase in global emissions with conventional energy generation. Therefore, the penetration of renewable energy resources into the power grid has increased significantly. Photovoltaic systems have become the most popular resources as their protentional is enormous, thus, the worldwide installed PV capacity has increased to more than 635 gigawatts (GW), covering approximately 2% of the global electricity demand. Power electronics are an essential part of photovoltaic generation; the drive for efficient power electronic converters is gaining more and more momentum. Presently, multilevel inverters (MLI) have become more attractive to researchers compared to two-level inverters due to their abilities to provide lower electromagnetic interference, higher efficiency, and larger DC link voltages. This paper reviews multilevel inverters based on their classifications, development, and challenges with practical recommendations in utilizing them in renewable energy systems. Moreover, PV systems with various maximum power point tracking (MPPT) methods have been extensively considered in this paper as well. The importance and the development of a modified multilevel inverter are also highlighted in this review. In general, this paper focuses on utilizing multilevel inverters for PV systems to motivate and guide society to focus on inventing an efficient and economical multilevel inverter that has the combined capabilities of these converters reported in the literature.

With the increasing use of low-voltage portable devices and growing requirements of functionalities embedded into such devices, efficient dc/dc conversion and power management techniques are needed. In this paper, an architecture for boosting extremely low voltages (about 100 mV) to the typical supply voltages of current integrated circuits is presented which is suitable for power harvesting applications too. Starting from a 120-mV supply voltage, the converter reaches an output voltage of 1.2 V, providing an output current of 220 μA and exhibiting a maximum power efficiency of about 30%. Along with the dc/dc converter, a power management circuit is presented, which can regulate the output voltage and improve the overall efficiency. A test chip was fabricated using a United Microelectronics Corporation 180-nm low-threshold CMOS process.

Multi-level inverters (MLIs) have been widely used in recent years due to their various advantages in industrial and grid-connected applications. Traditional MLI topologies are being hampered by the rapid surge of renewable energy systems (RES) as a result of performance difficulties such as poor power reliability, an economically unviable structure, and a lack of efficiency. These difficulties are due to the traditional MLI topologies’ inability to keep up with the increasing demand for RES. Because of concerns about performance and limitations posed by classic MLI topologies, researchers have found themselves driven to the idea of building innovative hybrid MLI topologies. This study provides a comprehensive analysis of multilevel inverter systems that are wired into the main power supply. Grid-connected inverter types and their configurations are discussed in depth in this review. Diverse multi-level inverter topologies, as well as the different approaches, are divided into various categories and discussed in depth. Additionally, a number of control reference frames for inverters were brought forward for discussion. Furthermore, different inverter control strategies were investigated, followed by a tabular summary of recent developments in the inverter-related literature for the convenience of the readers. Moreover, the recently proposed grid-connected multi-level inverter systems were discussed including their findings and innovations. In conclusion, a brief description of the study’s scope was offered and research directions for future studies were provided.

A CMOS operational amplifier with high immunity to electromagnetic interferences is presented. It is based on an easy modification of the differential pair with active current load. The proposed input stage can be fabricated in standard CMOS technologies, and it neither requires extra mask levels, such as triple well, nor external components. Analysis and results are provided for very large interferences, which arise from the input pin.

The Internet of Things (IoT) has found application in many components of implantable medical devices, wearable smart devices, monitoring systems, etc. The IoT devices are conventionally battery powered, even though, in several low power applications, they can also be powered using energy harvesting technology. Independently of the power sources (if batteries or environment), efficient and robust power converters must be designed to provide the small and distributed energy required by such IoT devices. This review paper will first provide an overview about the power consumption in IoT devices; second, it will discuss the most recent research and advance in the field of fully-integrated or embedded DC/DC converters, starting from high-performance integrated charge pumps or embedded inductive boost converters for specific harvesting sources (temperature, solar, and so on), to novel DC/DC converters for multiple energy sources.

The susceptibility to electromagnetic interferences of the analog circuits used in the sensor readout front-end is discussed. Analog circuits still play indeed a crucial role in sensor signal acquisition due to the analog nature of sensory signals. The effect of electromagnetic interferences has been simulated and measured in many commercial and integrated analog circuits; the main cause of the electromagnetic susceptibility is investigated and the guidelines to design high EMI immunity circuits are provided. The susceptibility to electromagnetic interferences of the analog circuits used in the sensor readout front-end is discussed. Analog circuits still play indeed a crucial role in sensor signal acquisition due to the analog nature of sensory signals. The effect of electromagnetic interferences has been simulated and measured in many commercial and integrated analog circuits; the main cause of the electromagnetic susceptibility is investigated and the guidelines to design high EMI immunity circuits are provided.