This paper presents the design and analysis of a new micro-electro-mechanical system (MEMS) tuning fork gyroscope (TFG), which can effectively improve the mechanical sensitivity of the gyroscope sense-mode by the designed leverage mechanism. A micromachined TFG with an anchored leverage mechanism is designed. The dynamics and mechanical sensitivity of the design are theoretically analyzed. The improvement rate of mechanical sensitivity (IRMS) is introduced to represent the optimization effect of the new structure compared with the conventional one. The analytical solutions illustrate that the IRMS monotonically increases with increased stiffness ratio of the power arm (SRPA) but decreases with increased stiffness ratio of the resistance arm (SRRA). Therefore, three types of gyro structures with different stiffness ratios are designed. The mechanical sensitivities increased by 79.10%, 81.33% and 68.06% by theoretical calculation. Additionally, FEM simulation demonstrates that the mechanical sensitivity of the design is in accord with theoretical results. The linearity of design is analyzed, too. Consequently, the proposed new anchored leverage mechanism TFG offers a higher displacement output of sense mode to improve the mechanical sensitivity.

A new micromachined vibrating ring gyroscope (VRG) architecture with low quadrature error and high-linearity is proposed, which successfully optimizes the working modes to first order resonance mode of the structure. The improved mode ordering can significantly reduce the vibration sensitivity of the device by adopting the hinge-frame mechanism. The frequency difference ratio is introduced to represent the optimization effect of modal characteristic. Furthermore, the influence of the structural parameters of hinge-frame mechanism on frequency difference ratio is clarified through analysis of related factors, which contributes to a more effective design of hinge-frame structure. The designed VRG architecture accomplishes the goal of high-linearity by using combination hinge and variable-area capacitance strategy, in contrast to the conventional approach via variable-separation drive/sense strategy. Finally, finite element method (FEM) simulations are carried out to investigate the stiffness, modal analysis, linearity, and decoupling characteristics of the design. The simulation results are sufficiently in agreement with theoretical calculations. Meanwhile, the hinge-frame mechanism can be widely applied in other existing ring gyroscopes, and the new design provides a path towards ultra-high performance for VRG.

Energy harvesting in multi-directional excitation for human wearable devices is a challenge. A rotating electromagnetic energy harvester (REMEH) based on an eccentric rotor structure is proposed in this paper. Two poles of the magnets in the REMEH are alternately arranged in a ring. The electrical output characteristics of the energy harvester are analyzed through theoretical, numerical simulation and experimental testing methods based on the establishment of magnetic flux density models, the coil induced voltage, and the excitation direction of the eccentric rotor structure. Theoretical analysis and experimental results show that the design of the eccentric rotor structure is well adapted to multi-directional and irregular excitation. The circular staggered arrangement of the magnets effectively increases the output voltage and output power. The results show that the average output power increases slowly when the walking speed increases from 1 to 3 km h⁻¹, and the average output power increases substantially when the walking speed increases from 3 to 5 km h⁻¹. When the walking speed is 1 and 3 km h⁻¹, the average output power is 0.439 and 0.638 mW, respectively. At a walking speed of 5 km h⁻¹, the average output power increases rapidly to 1.68 mW, corresponding to a power density of 16.59 μW g⁻¹. This high-performance energy harvester can provide effective power supply for wearable devices or low-powered sensors.

The classical continuum mechanics theory cannot sufficiently describe the effect of pebbles on projectile, which leads to a large calculation error. In this paper, an orthogonal curvilinear coordinate system is constructed, which effectively describes and perfects the normal cavity expansion theory. A couple stress theory based on the normal cavity expansion is proposed in which not only the tangential movements but also the rotations of the concrete medium are considered. According to the high-speed impact of pebble concrete, combined with dynamic equations and the FE simulation, the theoretical and simulation results of pebble particles scale on warhead resistance are compared. It is shown that, the larger the scale of pebble particles, the stronger the effect of rotation on the resistant force applied on the warhead.