Predicting perforation erosion and its effects on fracture dimensions, fluid distribution, and pressure drop can be an essential part of successful design of hydraulic-fracturing treatments, especially for massive treatments along the horizontal wells when limited-entry techniques are implemented. Both the perforation diameter D and discharge coefficient Cd increase dynamically as proppant-laden slurries are pumped through perforations, making it necessary to consider the changes of these two variables in terms of time to predict the perforation-erosion effects. In this paper, we conduct a study of the perforation-erosion effects by implementing our new perforation-erosion model derived from experimentally verified abrasion mechanisms to calculate the rate changes of these two variables and the consequent influence on the fracture dimensions, fluid distribution, and downhole pressure during a treatment. The selected parameters affecting the erosion effects in the study include perforation number, perforation-cluster spacing, in-situ stress difference, and fracturing-fluid viscosity. The results demonstrate that our model can predict the perforation-erosion effects on practical hydraulic-fracturing applications in a physically clear and mathematically concise manner under different circumstances by inspecting the simultaneous increases of D and Cd separately, leading to more-appropriate treatment designs, especially with the limited-entry techniques.
The variational boundary integral method of Xu and Ortiz is taken as a basis for studying dislocation nucleation from atomically sharp cracks under combined mode I-mode II loading. The tension-shear potential of Rice et al. is extended to allow for skewness in the shear resistance curve and to account for the surface production resistance which accompanies ledge formation. The calculated unstable equilibrium configurations of the incipient dislocations and the dependence of the associated activation energies on crack tip energy release rate are found to differ from the Rice-Beltz perturbation solution and the Schöck-Püschl more approximate solution. Simulations of dislocation nucleation on inclined slip planes reveal that, while tension softening facilitates nucleation, surface production resistance impedes it. The extent to which these two effects influence critical conditions for dislocation nucleation is quantified. The calculations suggest that homogeneous dislocation nucleation on inclined planes is not favoured for materials with all but the lowest of unstable stacking-energy-to-surface-energy ratios. This emphasizes the importance of heterogeneous dislocation nucleation and nucleation on oblique slip planes on which free surface production should play a much weaker role. The implications of these findings on the nucleation-controlled brittleductile transition in cleavage fracture are discussed.
In the present paper, we analyse several activation configurations of embryonic dislocations nucleated from the tip of a cleavage crack. The activation configurations include nucleation on inclined planes, on oblique planes and on cleavage ledges and are treated within the classical framework of Peierls. A variational boundary integral method with an interplanar tension-shear potential developed earlier is used to solve for the saddle-point configurations of embryonic dislocation loops and their associated energies. Based on the assumption that the brittle-to-ductile transition in cleavage fracture is a nucleation-controlled process (as is expected to be the case in bcc transition metals such as α-Fe) the results of the calculations are used to estimate the brittle-to-ductile transition temperatures. It is concluded that only dislocation nucleation on cleavage ledges furnishes realistic values of the transition temperature. The homogeneous nucleation of dislocations on either inclined or oblique planes requires transition temperatures well above the melting point. This implies that nucleation of dislocations from a crack tip in intrinsically brittle crystals is only possible at local crack front heterogeneities such as cleavage ledges, and that the homogeneous nucleation of dislocations from a straight crack front is not possible. This conclusion is supported by the experimental observation that dislocation nucleation from a crack tip is a rare event which occurs preferentially at heterogeneities.
We present an analysis and results on the homogeneous nucleation of a dislocation loop under stress in a perfect crystal. By using a variational boundary integral method in the Peierls-Nabarro framework, we have determined the saddle-point configurations of embryonic dislocation loops and their associated activation energies under stress levels up to the ideal shear strength. The high-energy barriers under the usual levels of applied shear stresses, differing markedly from the ideal shear strength, confirm the widely held view that thermal motion should play no role in such nucleation. The result provides means for more definitive solutions of fundamental problems involving homogeneous nucleation of dislocation loops and has significant implications for models based on the mechanism of nucleation of dislocations from a perfect crystal.