This review provides valuable insights into environmental contamination caused by petroleum hydrocarbons and contributes to the development of effective remediation strategies.
Local natural clay from Sulaimani zone-Takiya (TKC), Kurdistan Region of Iraq, was characterized and used for the removal of basic fuchsin (BF) dye from laboratory bacterial wastewater. The characterization of the adsorbent was carried out with XRD, XRF, and FT-IR. The clay sample was dominated by vermiculite. Adsorption tests under different conditions of contact time, pH of the solution, temperature, initial dye concentration, and adsorbent amount were performed to analyze the effect of various experimental parameters. Equilibrium time was reached within 180 minutes, and maximum BF adsorption was achieved at pH 6.8 at a temperature ranging from 20 to 50°C. The experimental data fitted the pseudo-second-order kinetic model, with the activation energy of 22.68 kJ·mol-1. Adsorption isotherms could be well-fitted by the Langmuir isotherm model. The thermodynamic parameters such as [ ], [ ], and [ ] were determined, and the negative values of [ ] indicated that adsorption was spontaneous at all temperatures. Furthermore, the values of [ ] indicated an endothermic reaction. Wastewater contaminated by BF dye from the bacterial laboratory was collected (BF concentration: 160 mg·L-1) and treated by TKC. The resulting concentration of BF after adsorption was 4.76 mg·L-1. The maximum amount of dye adsorbed is about 149.2 mg/g or 0.44 mmol/g, which is close to the range of the cation exchange capacity (CEC) value of the vermiculite which indicated that cation exchange was the dominant adsorption mechanism.
Natural clay from Darbandikhan (DC) was evaluated in its natural form, after acid activation (ADC), and after pillaring (PILDC) as a potential adsorbent for the adsorption of methyl orange (MO) as a model anionic dye adsorbate. The effect of different clay treatments was investigated using X-Ray Diffraction (XRD), X-Ray Fluorescence (XRF), Scanning Electron Microscope (SEM) and Fourier-Transform Infrared Spectroscopy (FT-IR), and N2 physisorption analysis. Both acid activation and pillaring resulted in a significant increase in adsorption affinity, respectively. The adsorption favored acidic pH for the anionic dye (MO). The adsorption process was found to follow pseudo-second-order kinetics with activation energies of 5.9 and 40.1 kJ·mol−1 for the adsorption of MO on ADC and PILDC, respectively, which are characteristic of physical adsorption. The adsorption isotherms (Langmuir, Redlich-Peterson and Freundlich) were fitted well to the experimental data. The specific surface area of the natural clay was very low (22.4 m2·g−1) compared to high-class adsorbent materials. This value was increased to 53.2 m2·g−1 by the pillaring process. Nevertheless, because of its local availability, the activated materials may be useful for the cleaning of local industrial wastewaters.
The current study is concerned with the primary environmental assessment of the physicochemical characterization of seasonal fluctuations in the leachate of Tanjaro open dump site in Sulaymaniyah City, and its impact on the quality of the groundwater. The primary characteristics of the leachates were their high levels of organic and inorganic components and their toxicity because of the presence of heavy metal concentrations. For almost all physicochemical parameters, the leachate from the Tanjaro area dumping has incredibly high values. All heavy metals were present in leachate, with the exception of cadmium and mercury, albeit at levels below their respective permitted limits. The characterization revealed that Leachate 1 (L1) may be referred to as young leachate, whereas Leachate 2 (L2) and Leachate 3 (L3) can be referred to as old leachate due to their pH values. It was indicated that the Tanjaro dumping is operating and in the early stages of stabilization. BOD5/COD was around 0.63, and the leachate was highly biodegradable in the anaerobic phase. Groundwater, which contains little to no organic matter, was not found to be severely affected by monitoring wells located close to the dumpsites. The conductivity, total dissolved solids, total hardness, Mn, and Fe were some of the values that went above the WHO guidelines. Correlation analysis was used as a preliminary descriptive technique to establish the strength of the association between the relevant variables. Some parameters were discovered to be statistically significantly correlated with one another, pointing to a close connection between these parameters.
7 December 2019 in Environmental Science and Pollution Research