Lihai Wang

Dr. Lihai Wang


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 April 2019 in Materials
Verified
Journal Article
Open access
PDF file
XWXue Wang
Xue Wang
LCLulu Chang
Lulu Chang
XSXiaolong Shi
Xiaolong Shi
LWLihai Wang
Lihai Wang
In this study, jute fabrics/epoxy-laminated composites were fabricated via a simple and effective manual layering. Hot-alkali treatment was used to pretreat jute fabrics to improve their interfacial compatibility. The effects of hot-alkali treatment with five concentrations (2%, 4%, 6%, 8% and 10%) on the composition, crystallinity and surface morphology of jute fibers, were analyzed with the aids of Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), and the scanning electron microscope (SEM). The mechanical properties (tensile and flexural) of laminated composites, and the morphology of the tensile fracture surface, were analyzed. The results indicated that the crystallinity index (CI) and crystallite size (CS) of the cellulose in jute fibers were improved, and there were three stages for CI and CS with the increase of alkali concentrations. Hot-alkali treatment improved the mechanical properties of laminated composites, especially for the 6% NaOH-treated jute fabric reinforced. The tensile strength, flexural strength, tensile modulus and flexural modulus of 6% NaOH-treated fabrics reinforced composites were enhanced by 37.5%, 72.3%, 23.2% and 72.2%, respectively, as compared with those of untreated fabrics reinforced composites. The fiber pull-out and the gaps of the tensile fracture surface were reduced after hot-alkali treatment.

1 May 2019 in Polymers
Verified
Journal Article
Open access
PDF file
XWXue Wang
Xue Wang
LWLihai Wang
Lihai Wang
WJWenwen Ji
Wenwen Ji
QHQuanling Hao
Quanling Hao
GZGuanghui Zhang
Guanghui Zhang
QMQingkai Meng
Qingkai Meng
In this study, jute fabrics were used to reinforce epoxy resin to prepare laminated composites. KH-560 silane coupling agent modification was used to improve the interfacial compatibility between fibers and epoxy. The effects of different immersion times (0 min, 10 min, 30 min, 60 min, 90 min, and 120 min) on the jute fiber’s element content, crystal structure, and thermal stability, and the mechanical properties of laminated composites were studied. X-ray diffractometry (XRD) analysis showed that the KH-560 modification improved the crystallinity index (CI) and crystallite sizes (CS) of jute fibers. Scanning electron microscopy (SEM) analysis of the tensile fracture surfaces revealed a thick epoxy on the modified pulled fiber surfaces. Fourier transform infrared spectroscopy (FTIR) and energy dispersive spectrometer (EDS) analysis identified the presence of silicon and C–O–Si/Si–O–Si cross-linked structures on the surface of modified jute fibers. These cross-linked structures improved the thermal stability and mechanical properties of the laminated composites. When the immersion time was 60 min, the CI, CS, tensile strength, tensile modulus, flexural strength, and flexural modulus of the modified samples were 42.39%, 3.62 nm, 34.6 ± 1.1 MPa, 2.11 ± 0.12 GPa, 83.7 ± 1.8 MPa, and 4.08 ± 0.12 GPa, respectively, which were better than that of unmodified and other modified composites.

14 December 2022 in Microorganisms
Verified
Journal Article
Open access
PDF file
Ping ZhangPing Zhang
Ping Zhang
GXGuangqiang Xie
Guangqiang Xie
LWLihai Wang
Lihai Wang
Yanqiu XingYanqiu Xing
Yanqiu Xing
To improve the application of endophyte Bacillus velezensis BY6 from the xylem of poplar, the effect of BY6 on the growth of diseased Populus davidiana × Populus. alba var. pyramidalis Louche (Pdpap poplar) seedlings and the biological control effect on the pathogen Armillaria solidipes were tested using a plant split-root experiment. After applying BY6 to the roots of diseased Pdpap poplar seedlings, the results show that plant growth indicators (dry mass, fresh mass, and plant height) were significantly increased (p < 0.05), and genes related to auxin hormone signal transcription were activated. BY6 indicated a surprising control effect after the inoculation of diseased Pdpap poplar seedlings. Compared to the infected control group, the treated disease index of the diseased Pdpap poplar seedlings in the treatment group were reduced by 49.53% on the 20th day. The relative staining areas of diaminobenzidine (DAB) and Trypan blue decreased by 3.37 and 7.31 times, respectively. The physiological indicators (soluble sugar and protein) and oxidase indicators were significantly increased (p < 0.05). The expression levels of defense genes related to salicylic acid (SA) and jasmonic acid (JA) signaling pathways were significantly increased (p < 0.05). Amazingly, the results indicate that BY6 simultaneously activates induced systemic resistance (ISR) and systemic acquired resistance (SAR) in diseased Pdpap poplar seedlings and promotes growth. The results indicate that BY6 is a promising candidate for developing forest tree biofertilizers and biopesticides.

8 September 2018 in Forests
Verified
Journal Article
Open access
PDF file
XYXiaoquan Yue
Xiaoquan Yue
LWLihai Wang
Lihai Wang
XSXiaolong Shi
Xiaolong Shi
MXMingxian Xu
Mingxian Xu
ZZZhiming Zhu
Zhiming Zhu
In order to use the electrical resistance method to accurately and timely detect and evaluate the internal decay defects of living trees, the effects of the seasonal temperature and moisture content on the electrical resistance of standing trees were investigated. At the Northeast Forestry University Experimental Forest Farm, Harbin, Heilongjiang Province of China, Populus simonii Populus simonii Carr. and Larix gmelinii (Rupr.) Rupr. were selected as the objects and the electrical resistance of standing trees was tested through different seasons from December 2016 to December 2017. Meanwhile, the effects of changes in the seasonal temperatures (−20 to −10 °C, −10 to −5 °C, −5 to 0 °C, 0 to 5 °C, 5 to 10 °C, 10 to 15 °C, 15 to 25 °C) as well as changes in the moisture content (MC) (Populus simonii, MC ≥ 103%; Larix gmelinii, MC ≥ 77.5%) on the electrical resistance in the cross-sections of living trees were studied. The influence of temperature at different moisture contents, the moisture content at different temperatures, and their combined effects on electrical resistance were analyzed, following which a regression model was also established. The obtained results indicated that ambient temperature had a significant effect on the average value of electrical resistance in the cross-section of living trees when temperatures were below the freezing point. There was a sudden discontinuity near the freezing point, and logR (logarithm value of electrical resistance) in the cross-sections of sound trees and decayed trees changed in a similar trend with variations in the temperature. While the effect of moisture content on logR in the cross-sections of threes was insignificant at different temperatures because of the moisture content above FSP (fiber saturation point). It indicated that the temperature and moisture content had interactive effects on logR in the cross-sections. The binary linear regression model between moisture content, temperature, and logR was highly fitted with a correlation coefficient (R2) higher than 0.8. The outcome of this investigation indicates that when non-destructive testing is performed on living trees using electrical resistance at different seasonal temperatures, the measured results need to consider both the temperature and moisture content. For practical work, it is not recommended to consider testing living trees near the freezing point temperature using the electrical resistive tomography. Below the freezing point, the electrical resistance changes with temperature greatly relative to the normal temperature. Therefore, when performing the detection of electrical resistance, it is necessary to calibrate the effects of temperature

5 March 2019 in PeerJ
Verified
Journal Article
Open access
PDF file
XYXiaoquan Yue
Xiaoquan Yue
LWLihai Wang
Lihai Wang
JWJames P. Wacker
James P. Wacker
ZZZhiming Zhu
Zhiming Zhu
Background: To ensure the safety of trees, two NDT (nondestructive testing) techniques, electric resistance tomography and stress wave tomography, were employed to quantitatively detect and characterize the internal decay of standing trees. Comparisons between those two techniques were done to make full use of the individual capability for decay detection. Methods: Eighty trees (40 Manchurian ash and 40 Populus simonii) were detected, then wood increment cores were obtained from each cross disc trial. The Dt, which was defined as the value determined by the mass loss ratio of each wood core, was regarded as the true severity of decay. Using ordinary least-squares regression to analyze the relationship between Dt and De (De was defined as the severity of decay determined by electric resistance tomography) and between Dt and Ds (Ds was defined as the severity of decay determined by stress wave tomography). Results: The results showed that both methods could estimate the severity of decay in trees. In terms of different stages of decay, when Dt < 30%, De had a strong positive correlation with Dt (R2 = 0.677, P < 0.01), while, when Dt ≥ 30%, Ds had a significant positive correlation relationship with Dt (R2 = 0.645, P < 0.01). Conclusion: Electric resistance tomography was better than stress wave tomography for testing in the early stages of decay, while stress wave tomography can be used effectively in the late stage of decay. It is suggested that each technique can be used in the practice of internal decay testing of standing trees based on decay stages and operating conditions.

15 June 2021 in Forests
Verified
Journal Article
Open access
PDF file
CHCongxun Huang
Congxun Huang
GXGuoqi Xu
Guoqi Xu
LWLihai Wang
Lihai Wang
Ping ZhangPing Zhang
Ping Zhang
PZPengwei Zhao
Pengwei Zhao
YZYan Zhong
Yan Zhong
(1) Background: Wood decay is a serious issue that results from the presence of wood-destroying fungi and has a great influence on the international wood industry. The utilization of biological control methods offers good prospects for wood preservation. (2) Methods: The plate-screening experiment, the soil block test of the Chinese stand method (GB/T 13942.1), and the characterization of wood blocks were used to achieve biological control of brown rot and white rot. (3) Results: Through isolation, screening, and identification, the antagonistic bacterium Bacillus velezensis Nhw-B72 strain was obtained. In the plate-screening experiment, the inhibition zone diameter of Nhw-B72 for Gloeophyllum trabeum was 1.68 cm and that for Coriolus versicolor was 2.33 cm. After inhibition, the morphology of mycelia was distorted, malformed, and broken. In the soil block test, the average weight loss percentage of wood blocks in the control group was 61.66%. In the treatment group, the average weight loss percentage of the wood blocks with drying was 28.18% and that of the wood blocks without drying was 34.97%. (4) Conclusions: The strain has an obvious antagonistic effect on the wood-destroying fungi and the sterile fermentative liquid can effectively inhibit wood decay. In addition, compared to the drying of wood blocks, the air-drying of blocks after impregnation with the fermentative liquid had a better inhibition effect.