Industrial collaborative robotics is one of the main enabling technologies of Industry 4.0. Collaborative robots are innovative cyber-physical systems, which allow safe and efficient physical interactions with operators by combining typical machine strengths with inimitable human skills. One of the main uses of collaborative robots will be the support of humans in the most physically stressful activities through a reduction of work-related biomechanical overload, especially in manual assembly activities. The improvement of operators’ occupational work conditions and the development of human-centered and ergonomic production systems is one of the key points of the ongoing fourth industrial revolution. The factory of the future should focus on the implementation of adaptable, reconfigurable, and sustainable production systems, which consider the human as their core and valuable part. Strengthening actual assembly workstations by integrating smart automation solutions for the enhancement of operators’ occupational health and safety will be one of the main goals of the near future. In this paper, the transformation of a manual workstation for wire harness assembly into a collaborative and human-centered one is presented. The purpose of the work is to present a case study research for the design of a collaborative workstation to improve the operators’ physical ergonomics while keeping or increasing the level of productivity. Results demonstrate that the achieved solution provides valuable benefits for the operators’ working conditions as well as for the production performance of the companies. In particular, the biomechanical overload of the worker has been reduced by 12.0% for the right part and by 28% for the left part in terms of manual handling, and by 50% for the left part and by 57% for the right part in terms of working postures. In addition, a reduction of the cycle time of 12.3% has been achieved.
Collaborative robots are among the key enabling technologies of the fourth industrial revolution and have the potential to change the way people and machines physically interact. Such collaborative robotics applications can be successful in small- and medium-sized enterprises (SMEs) only if they are properly implemented, taking into account safety and ergonomics of the shared workplace. This chapter first reviews safety standards, methods for risk assessment, and the concept of ergonomics of workplaces. The chapter discusses why collaborative robotics can be seen as important potential for SMEs and what the challenges are that SMEs are facing when implementing collaborative workspaces in the company. In conclusion, the chapter gives recommendations for future topics of research to overcome the barrier to introducing smart automation in SMEs.
Energy saving in robotic and mechatronic systems is becoming an evermore important topic in both industry and academia. One strategy to reduce the energy consumption, especially for cyclic tasks, is exploiting natural motion. We define natural motion as the system response caused by the conversion of potential elastic energy into kinetic energy. This motion can be both a forced response assisted by a motor or a free response. The application of the natural motion concepts allows for energy saving in tasks characterized by repetitive or cyclic motion. This review paper proposes a classification of several approaches to natural motion, starting from the compliant elements and the actuators needed for its implementation. Then several approaches to natural motion are discussed based on the trajectory followed by the system, providing useful information to the researchers dealing with natural motion.
This paper describes a method for reducing the energy consumption of industrial robots and electrically actuated mechanisms performing cyclic tasks. The energy required by the system is reduced by outfitting it with additional devices able to store and recuperate energy, namely, compliant elements coupled in parallel with axles and regenerative motor drives. Starting from the electromechanical model of the modified system moving following a predefined periodic path, the relationship between the electrical energy and the stiffness and preload of the compliant elements is analyzed. The conditions for the compliant elements to be optimal are analytically derived. It is demonstrated that under these conditions the compliant elements are always beneficial for reducing the energy consumption. The effectiveness of the design method is verified by applying it to two test cases: a five-bar mechanism and a SCARA robot. The numerical validations show that the system energy consumption can be reduced up to the while performing a high-speed, standard, not-optimized trajectory.
Nowadays, the wire harness assembly process is still manually performed due to the process complexity and product variability (e.g., wires of different kind, size and length). The Wire cobots project, in which this work was conceived, aims at improving the current state-of-art assembly process by introducing in it collaborative robotics. A shared workstation exploiting human abilities and machine strengths was developed to assembly automotive wire harness by means of insulated tape for a real industrial case. In the new workstation, the human deals with the complex task of wire handling, while the robot performs the repetitive and strenuous taping operations. Such a task allocation together with the workstation redesign allow for an improvement of the operator’s well-being in terms of postural conditions and for an increase of the production efficiency. In this paper, the mechanical and mechatronic design, as well as the realization and validation of this new collaborative workstation are presented and discussed.