Direct seismic waves (P- or S-waves) are used to locate and further characterize microseismic events. The resolution of information obtained from direct waves depends on the peak frequencies of the waveforms. The peak frequency results from combination of the source, propagation, and the receiver effects. For frequencies below the corner frequency, propagation effects control the peak frequency in observed seismograms of microseismic events. The frequency dependence of direct body waves can be modeled by attenuation, specifically the global attenuation factor. This model is consistent with observed data along surface profiles explaining the difference between the peak frequencies of P- and S-waves. In addition, the model is consistent with the peak frequencies observed on downhole monitoring arrays. This can be used to invert effective attenuation providing additional unique measurement from microseismic events. The corner frequency can be estimated from the average stress drop and analytical source models such as a circular crack model. Typical stress drops for various magnitude ranges are discussed. The peak frequencies are usually below the corner frequencies of microseismic events smaller than moment magnitude 0.7 for surface monitoring and moment magnitude −0.5 for downhole monitoring. Understanding of the frequency dependence of the direct waves allows us to optimally design monitoring networks and mainly invert effective attenuation providing unique measurement from microseismic monitoring.
Orbital and surface observations can shed light on the internal structure of Mars. NASA’s InSight mission allows mapping the shallow subsurface of Elysium Planitia using seismic data. In this work, we apply a classical seismological technique of inverting Rayleigh wave ellipticity curves extracted from ambient seismic vibrations to resolve, for the first time on Mars, the shallow subsurface to around 200 m depth. While our seismic velocity model is largely consistent with the expected layered subsurface consisting of a thin regolith layer above stacks of lava flows, we find a seismic low-velocity zone at about 30 to 75 m depth that we interpret as a sedimentary layer sandwiched somewhere within the underlying Hesperian and Amazonian aged basalt layers. A prominent amplitude peak observed in the seismic data at 2.4 Hz is interpreted as an Airy phase related to surface wave energy trapped in this local low-velocity channel.
25 August 2016 in Geophysical Journal International
Green functions (GFs) are an essential ingredient in waveform-based earthquake source inversions. Hence, the error due to imprecise knowledge of a crustal velocity model is one of the major sources of uncertainty of the inferred earthquake source parameters. Recent strategies in Bayesian waveform inversions rely on statistical description of the GF uncertainty by means of a Gaussian distribution characterized by a covariance matrix. Here we use Monte-Carlo approach to estimate the GF covariance considering randomly perturbed velocity models. We analyse the dependence of the covariance on various parameters (strength of velocity model perturbations, GF frequency content, source-station distance, etc.). Recognizing that the major source of the GF uncertainty is related to the random time shifts of the signal, we propose a simplified approach to obtain approximate covariances, bypassing the numerically expensive Monte-Carlo simulations. The resulting closed-form formulae for the approximate auto-covariances and cross-covariances between stations and components can be easily implemented in existing inversion techniques. We demonstrate that the approximate covariances exhibit very good agreement with the Monte-Carlo estimates, providing realistic variations of the GF waveforms. Furthermore, we show examples of implementation of the covariance matrix in a Bayesian moment tensor inversion using both synthetic and real data sets. We demonstrate that taking the GF uncertainty into account leads to improved estimates of the moment tensor parameters and their uncertainty.
On June 18, 2018, an MJMA6.1 inland crustal earthquake occurred on the northeast edge of the Osaka basin, Japan. This event impacted the region by the maximum PGA larger than 0.9 g, and it was followed by a series of weaker aftershocks. The earthquakes were located near the Arima-Takatsuki Tectonic Line (ENE–WSW dextral strike-slip faults) and the Uemachi fault system (N–S reverse faults), hence the seismotectonic interpretations we assumed to be rather complex. Here we propose a seismotectonic model of this sequence based on seismological data and stress field considerations. In particular, we infer to a centroid moment tensor for the mainshock using Bayesian full-waveform inversion from strong motion records. The solution of Mw5.6 involved a significant CLVD component, which we interpreted as being due to rupture process on a complex fault geometry. Decomposition of the non-DC moment tensor into major and minor pure-shear moment tensors suggests a combination of strike-slip and reverse faulting mechanisms. We also analyzed the 108 strongest aftershocks with MJMA between 2.0 and 4.1 using records from broadband and short-period stations. Aftershocks’ moment tensors inverted from P-wave amplitudes exhibit mainly strike-slip and reverse faulting mechanisms, having significant spatial variations. The local stress field inverted from these mechanisms had a dominant maximum (compressional) principal stress σ1 in ESE–WNW direction, while σ2 ≅ σ3. Both ENE–WSW dextral strike-slip and N–S reverse faults can be active in such stress field as observed in the mainshock (without any need for stress spatial inhomogeneity). To conclude, the activated strike-slip fault is parallel to the Arima-Takatsuki Tectonic Line. The activated N–S reverse fault is dipping to east by 50° similarly as the Uemachi fault system. Joint shear movements on both of these faults contributed significantly to the total seismic moment of the mainshock.
7 October 2022 in Geophysical Journal International
SUMMARY: The horizontal-to-vertical (H/V) spectral ratio inversion is a traditional technique for deriving the local subsurface structure on Earth. We calculated the H/V from the ambient vibrations at different wind levels at the InSight landing site, on Mars, and also computed the H/V from the S-wave coda of the martian seismic events (marsquakes). Different H/V curves were obtained for different wind periods and from the marsquakes. From the ambient vibrations, the recordings during low-wind periods are close to the instrument self-noise level. During high-wind periods, the seismic recordings are highly contaminated by the interaction of the lander with the wind and the martian ground. Therefore, these recordings are less favourable for traditional H/V analysis. Instead, the recordings of the S-wave coda of marsquakes were preferred to derive the characteristic H/V curve of this site between 0.4 and 10 Hz. The final H/V curve presents a characteristic trough at 2.4 Hz and a strong peak at 8 Hz. Using a full diffuse wavefield approach as the forward computation and the Neighbourhood Algorithm as the sampling technique, we invert for the 1-D shear wave velocity structure at the InSight landing site. Based on our inversion results, we propose a strong site effect at the InSight site to be due to the presence of a shallow high-velocity layer (SHVL) over low-velocity units. The SHVL is likely placed below a layer of coarse blocky ejecta and can be associated with Early Amazonian basaltic lava flows. The units below the SHVL have lower velocities, possibly related to a Late Hesperian or Early Amazonian epoch with a different magmatic regime and/or a greater impact rate and more extensive weathering. An extremely weak buried low velocity layer (bLVL) between these lava flows explains the data around the 2.4 Hz trough, whereas a more competent bLVL would not generate this latter feature. These subsurface models are in good agreement with results from hammering experiment and compliance measurements at the InSight landing site. Finally, this site effect is revealed only by seismic events data and explains the larger horizontal than vertical ground motion recorded for certain type of marsquakes.