Department of Integrated Information Security, Admiral Makarov State University of Maritime and Inland Shipping, Saint-Petersburg, Dvinskaya st., 5/7, 198035, Russia
Dr. Sergei Chernyi
Department of Integrated Information Security, Admiral Makarov State University of Maritime and Inland Shipping, Saint-Petersburg, Dvinskaya st., 5/7, 198035, Russia
The use of digital technologies for processing and diagnosing electrocardiogram signals using wavelet-analysis can significantly improve the efficiency and quality of parameter estimations of the pacemaker configuration during implantation. It is also efficient in the process of correction of functional modes of cardiac pacemaker and diagnostics to eliminate postoperative complications, etc. A special processing of complex cardio signals at a qualitatively new level is an indispensable condition for the decisive improvement of the processing of current values of diagnosed parameters, widespread use of digital instruments for sound and informed decision-making on the provision of medical care and the treatment of people with diseases of the cardiovascular system. The article discusses the approximation method. Digital technologies are implemented using MATLAB computing environment.
The paper explores new approach for the real-time identification of harmonic composition of the distorted signals (voltages and currents) of autonomous electric power systems with inconsistent frequency, phase and amplitude, and which can be greatly distorted. The identification of target non-stationary harmonics is made by adjustment of the parameters of the relevant function-prototype. The proposed method of tracking the parameters of any harmonic of the distorted signal makes possible to provide unique, stable and convergent solution of the non-linear dynamic system. The obtained algorithm provides the unique asymptotic trajectory, being periodical and lying in the vicinity of the approximated function – target harmonic of the signal. This method may be successfully applied in design of the multivariable systems for identification of external parameters in the water transport and in other autonomous electric power systems. The test of the developed system is performed in the medium Matlab and the algorithm's practical implementation by FPGA sources is proposed
28 February 2015 in Transport and Telecommunication Journal
One of the most essential tasks for a number of systems of the automatic controls in the autonomous electric power systems of the water transport is accurate calculation of variable harmonic components in the non-sinusoidal signal. In the autonomous electric power systems operating with full semiconductor capacity, the forms of line currents and voltages are greatly distorted, and generator devices generate voltage with inconsistent frequency, phase and amplitude. It makes calculation of harmonic composition of the distorted signals be a non-trivial task. The present paper provides a mathematical set for solution of the outlined problem including the realization in the discrete form. The simplicity and efficiency of the system proposed make possible to perform its practical realization with the help of cheap FPGA. The test of the developed system has been performed in the medium Matlab
Hard- and software of a marine Euler-angle orientation control system is described. Vessel rolling and pitching are controlled by ballast tank level adjustment. A method for compensating the deviation
The cable-driven soft arm is mostly made of soft material; it is difficult to control because of the material characteristics, so the traditional robot arm modeling and control methods cannot be directly applied to the soft robot arm. In this paper, we combine the data-driven modeling method with the reinforcement learning control method to realize the position control task of robotic soft arm, the method of control strategy based on deep Q learning. In order to solve slow convergence and unstable effect in the process of simulation and migration when deep reinforcement learning is applied to the actual robot control task, a control strategy learning method is designed, which is based on the experimental data, to establish a simulation environment for control strategy training, and then applied to the real environment. Finally, it is proved by experiment that the method can effectively complete the control of the soft robot arm, which has better robustness than the traditional method.
This study investigates the application of various machine learning models for land use and land cover (LULC) classification in the Kerch Peninsula. The study utilizes archival field data, cadastral data, and published scientific literature for model training and testing, using Landsat-5 imagery from 1990 as input data. Four machine learning models (deep neural network, Random Forest, support vector machine (SVM), and AdaBoost) are employed, and their hyperparameters are tuned using random search and grid search. Model performance is evaluated through cross-validation and confusion matrices. The deep neural network achieves the highest accuracy (96.2%) and performs well in classifying water, urban lands, open soils, and high vegetation. However, it faces challenges in classifying grasslands, bare lands, and agricultural areas. The Random Forest model achieves an accuracy of 90.5% but struggles with differentiating high vegetation from agricultural lands. The SVM model achieves an accuracy of 86.1%, while the AdaBoost model performs the lowest with an accuracy of 58.4%. The novel contributions of this study include the comparison and evaluation of multiple machine learning models for land use classification in the Kerch Peninsula. The deep neural network and Random Forest models outperform SVM and AdaBoost in terms of accuracy. However, the use of limited data sources such as cadastral data and scientific articles may introduce limitations and potential errors. Future research should consider incorporating field studies and additional data sources for improved accuracy. This study provides valuable insights for land use classification, facilitating the assessment and management of natural resources in the Kerch Peninsula. The findings contribute to informed decision-making processes and lay the groundwork for further research in the field.