The focus of this review article was to outline the sources, pathways, effects, occurrence, and spatial distribution of the most prescribed pharmaceuticals in wastewater and receiving waters of South Africa. Google Scholar, Web of Science, and Scopus were used to gather data from different regions. A zone-wise classification method was used to determine the spatial distribution and data deficiencies in different regions of South Africa. This review revealed that over 100 pharmaceutical compounds have been reported in South Africa’s various water sources and wastewater, with most studies and highest concentrations being documented in Gauteng and Kwa-Zulu Natal. The pharmaceutical concentration in water samples ranged from ng/L to µg/L. Aspirin, ketoprofen, diclofenac, ibuprofen, naproxen, erythromycin, tetracycline, sulfamethoxazole, acetaminophen, streptomycin, ciprofloxacin, ampicillin, carbamazepine, atenolol, pindolol, efavirenz, and zidovudine residues were among the frequently detected pharmaceutical residues in water bodies and wastewaters of South Africa. Based on the spatial distribution data, Gauteng has the highest number of pharmaceuticals (108) detected in waste and surface water, with the Northern Cape having no monitoring evidence. Therefore, to precisely ascertain the geographical distribution of pharmaceutical contaminants in South Africa, this review recommends that further research be carried out to track their occurrence in aquatic environments and WWTP, especially in isolated regions like Limpopo.

In this paper surfactant modified kaolin clay for As(III) and As(V) was prepared by intercalating hexadecyltrimethylamonium bromide (HDTMA-Br) cationic surfactant onto the clay interlayers. Batch experiments were used to evaluate the effectiveness of surfactant modified kaolin clay towards As(III) and As(V) removal. The results revealed that adsorption of As(III) and As(V) is optimum at pH range 4-8. The maximum As(III) and As(V) adsorption capacities were found 2.33 and 2.88 mg/g, respectively after 60 min contact time. The data for adsorption of As(III) showed a better fit too pseudo first order model of reaction kinetics while the data for As(V) fitted better to pseudo second order model. The adsorption isotherm data for As(III) and As(V) fitted well to Langmuir model indicating that adsorption of both species occurred on a mono-layered surface. Adsorption thermodynamics model revealed that adsorption of As(III) and As(V) was spontaneous and exothermic. The presence of Mg2+ and Ca2+ increased As(III) and As(V) adsorption efficiency. The regeneration study showed that synthesized adsorbent can be used for up to 5 times with maximum As(III) and As(V) percentage removal of 54.2% and 62.33%, respectively achieved after 5th cycle. Surfactant modified kaolin clay mineral showed higher adsorption capacity towards As(III) and As(V) as compared to unmodified kaolin clay mineral and competitive with other adsorbent in the literature. The results obtained from this study revealed that surfactant modified kaolin mineral is a candidate material for arsenic remediation from groundwater.

In this study, a hybrid arsenic adsorbent was synthesized through intercalation inorganic and organic surfactant cations onto kaolin clay interlayers. The synthesized adsorbent was characterized X-ray fluorescence (XRF), Fourier Transform Infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET). Batch studies were conducted to determine As(III) and As(V) removal capacity of hybrid sorbent synthesized. It is found that As(III) removal is optimum at pH range of 4-6 while As(V) removal is optimum at pH range 4-8. The data for adsorption kinetics fitted to pseudo second order model implying that adsorption of As(III) and As(V) is chemisorption. The isotherm studies showed a better fit to Langmuir isotherm model indicating that adsorption of both As(III) and As(V) occurred on a mono-layered surface. The maximum adsorption As(III) and As(V) capacity at room temperature as determined by Langmuir model were found to be 7.99 and 7.32 mg/g, respectively. Thermodynamic parameters, ΔG° and ΔH° were found to be negative indicating that adsorption process occurred spontaneously and exothermic. Inorgano-organo modified kaolin clay was successfully regenerated for up 7 adsorption-regeneration cycles using 0.01 M HCl as regenerant. This study concluded that hybrid sorbent synthesized in this study is suitable for arsenic removal from groundwater.

This paper presents a chemical characterization of fine particulate matter in air masses passing through Thohoyandou and further determines their sources. Fine particulate matter (PM2.5) was collected and quantified using gravimetric method. X-ray fluorescence, Smoke stain reflectometer, Optical Transmissometer and Scanning Electron Microscopy- Energy Dispersive X-Ray Spectroscopy were used to determine the chemical and morphological composition of the particulate matter. The source apportionment was done using principal component analysis while the HYSPLIT model was used to depict the long-range transport clusters. The mean of concentrations of PM2.5, soot, black carbon and UVPM were 10.9 μg/m3, 0.69x10-5 m-1, 1.22 μg/m3 and 1.40 μg/m3, respectively. A total of 24 elements were detected in the PM2.5 with Pd, Sn, Sb, Mg, Al and Si being the dominant elements. SEM-EDS have shown the presence of irregular, flat and spherical particles which is associated with crustal material and industrial emissions. Source apportionment analysis revealed six major sources of PM2.5 in Thohoyandou namely, crustal materials, industrial emissions, vehicular emissions, urban emissions, fossil fuel combustion and fugitive-Pd. Air parcels that pass-through Thohoyandou were clustered into four. The major pathways were from the SW Indian Ocean, Atlantic Ocean and inland trajectories. Clusters from the ocean are associated with low concentration, while inland clusters are associated with high concentration of PM2.5. The PM2.5 occasionally exceeds the WHO daily guideline in Thohoyandou and the sources of PM2.5 extend beyond the borders. This study recommends that further studies need to be carried out to assess the health impacts of PM2.5 in Thohoyandou.

The present study evaluated the effectiveness of Fe-Mn modified kaolin clay in the uptake of As(V) from the solution. The elemental composition was characterized using X-ray fluorescence (XRF), while the surface morphology was characterized using Scanning Electron Microscopy (SEM). The surface area, pore diameter, and pore volume were determined using Brunauer, Emmett, and Teller (BET) and Barrett-Joyner-Halenda (BJH) techniques. The efficiency of the Arsenic removal of the adsorbent was evaluated using batch experiments. The results showed that the percentage of As(V) removal is optimum at acidic pH and decreased as the solution pH becomes more alkaline. The adsorption kinetics data fitted better to pseudo-second-order compared to the pseudo-first-order of reaction kinetics. The adsorption isotherm data fitted to the Langmuir isotherm model showing a maximum adsorption capacity of 2.44 mg/g, adsorbate concentration range of 1–30 mg/L, and adsorbent dosage of 0.4 g/100 mL. The value of ∆G° of the thermodynamic parameter was found to be negative, while ∆H° and ∆S° were found to be positive. For the regeneration-reuse study, the percentage of removal was found to be >85% after the sixth cycle of reuse. The results obtained from this study showed that Fe-Mn modified kaolin (FMK) is suitable for use in the uptake of As(V) from groundwater.

The severity of oil pollution, brought about by improper management, increases daily with an increase in the exploration and usage of oil, especially with an increase in industrialization. Conventional oil treatment methods are either expensive or time consuming, hence the need for new technologies. The aim of this research is to synthesize polypyrrole-modified silica for the treatment of oily wastewater. Pyrrole was copolymerized with silica in the presence of ferric chloride hexahydrate by adding 23 mL of 117.4 g/dm³ ferric chloride hexahydrate drop wise to a silica-pyrrole mixture (1:2.3). The mixture was stirred for 24 h, filtered and dried at 60 °C for 24 h. The composite was then characterized using FTIR and SEM/EDX. A central composite model was developed in design expert software to describe the efficiency of oil removal using the polypyrrole-modified silica under the influence of initial oil concentration, adsorbent dosage and contact time. The synthesized adsorbent had FTIR bands at 3000–3500 cm⁻¹ (due to the N-H), 1034 cm⁻¹ (attributed to the Si-O of silica), 1607 cm⁻¹ and 1615 cm⁻¹ (due to the stretching vibration of C=C of pyrrole ring). The adsorption capacity values predicted by the central composite model were in good agreement with the actual experimental values, indicating that the model can be used to optimize the removal of oil from oily wastewater in the presence of polypyrrole-modified silica. The adsorbent showed excellent oil uptake when compared with similar materials. The optimum conditions for oil removal were 7091 mg/L oil concentration, 0.004 g adsorbent dosage and contact time of 16 h. Under these conditions, the percentage of oil adsorption was 99.3% and adsorption capacity was 8451 mg/g. As a result of the low optimum dosage and the lack of agitation, the material was found to be applicable in the remediation of field wastewater.