As public attention is increasingly drawn toward more sustainable transportation methods, the popularity of electric vehicles (EVs) as part of the solution is rapidly expanding. Operating conditions within EVs can be severe compared to standard combustion powertrains, and the risk of electrical arcing across mechanical surfaces from electric leakage currents incites additional concern. This study employed a series of electro-tribological tests utilizing various moving patterns to improve understanding of the driving conditions for electrically induced bearing damage (EIBD). Rolling ball-on-disk tests were performed with different polyurea-thickened greases. Rotational tests were initially run at various speeds and test durations, but electrical damage was limited. However, electrical damage was unmistakable when a reciprocating motion was used at different track lengths and speeds. These results suggest that the conditions associated with the track length, such as the number of directional changes and speed-dependent film thickness, play a considerable role in forming electrical damage. This work provides critical insights into the mechanisms of EIBD in EVs and other electrical systems. It highlights the importance of understanding the operational conditions that contribute to EIBD, which can lead to improved designs and maintenance practices, ultimately enhancing the efficiency and lifespan of these systems.
As the performance and efficiency requirements of electric vehicles (EVs) continue to expand, the demand for advanced driveline lubricants has grown exponentially. Unlike traditional internal combustion engine (ICE) vehicles, EVs experience unique challenges, including increased acceleration and deceleration rates, immediate torque delivery, higher operating speeds, and elevated drivetrain temperatures. Moreover, EV lubricants must endure exposure to damaging bearing currents, which can lead to morphological damage on bearing surfaces, such as electrical pitting. Addressing these challenges is critical to ensuring the longevity and reliability of EV components. This study aims to explore and validate innovative lubricant solutions tailored explicitly for EV applications. This work provides experimental validation of the capabilities of silver (Ag) and different concentrations of magnetic iron-oxide nanoparticles (NPs) in reducing damage through reciprocating rolling ball-on-disk tests. Additionally, an electrically conductive carbon black lithium-thickened grease was tested under comparable conditions. The significance of this research lies in its potential to revolutionize the EV lubricant industry by offering a robust solution to a prevalent problem. Successful implementation of nanoparticle-enhanced lubricants could lead to increased durability and efficiency of EV drivetrains, reducing maintenance costs and improving overall vehicle performance. This advancement aligns with the evolving demands of the EV market and sets a new standard for lubricant technology in electrified mobility.
1 November 2004 in The Journal of Physical Chemistry B
Electrical connectors are found in many electrical systems like computers, light switches, or electric vehicles and are present in a wide range of environments as a result. These contacts can often be subject to degradation from such things as fatigue and wear; if this degradation makes the electrical contact resistance across the connector/contact change by too large an amount (depending on the application), the contact can fail or cause the system it is in to fail. As such, some contacts are lubricated to mitigate these effects. However, options are limited, as many lubricants are insulating or form insulating tribofilms. This work focuses on an investigation of the friction, wear, and electrical contact resistance properties of a dodecane-based silver nanoparticle lubricant as compared to a conventional option, along with exploring the effects of adding silver nanoparticles to this conventional lubricant. An analysis of the worn surfaces is also used to explore what friction and wear regimes were present for the different lubricants.