Nataliya  Skryabina

Nataliya Skryabina


Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 August 2012 in Metals
Verified
Journal Article
Open access
PDF file
Jacques HuotJacques Huot
Jacques Huot
Nataliya  SkryabinaNataliya Skryabina
Nataliya Skryabina
DFDaniel Fruchart
Daniel Fruchart
In this paper we review the latest developments in the use of severe plastic deformation (SPD) techniques for enhancement of hydrogen sorption properties of magnesium and magnesium alloys. Main focus will be on two techniques: Equal Channel Angular Pressing (ECAP) and Cold Rolling (CR). After a brief description of these two techniques we will discuss their effects on the texture and hydrogen sorption properties of magnesium alloys. In particular, the effect of the processing temperature in ECAP on texture will be demonstrated. We also show that ECAP and CR have produced different textures. Despite the scarcity of experimental results, the investigations up to now indicate that SPD techniques produce metal hydrides with enhanced hydrogen storage properties.

27 December 2018 in Molecules
Verified
Journal Article
Open access
PDF file
Nataliya  SkryabinaNataliya Skryabina
Nataliya Skryabina
VAValery Aptukov
Valery Aptukov
PRPetr Romanov
Petr Romanov
Daniel FruchartDaniel Fruchart
Daniel Fruchart
PRPatricia De Rango
Patricia De Rango
FLFabrice Leardini
Fabrice Leardini
Both numerical simulation and hardness measurements were used to determine the mechanical and microstructural behavior of AZ31 bulk samples when submitted to the Equal Channel Angular Pressing (ECAP) technique. Billets of this representative of Mg-rich alloys were submitted to different numbers of passes for various ECAP modes (anisotropic A, isotropic BC). The strain distribution, the grain size refinement, and the micro-hardness were used as indicators to quantify the effectiveness of the different processing routes. Structural characterizations at different scales were achieved using Scanning Electron Microscopy (SEM), micro-analysis, metallography, Small Angle Neutron Scattering SANS, X-Ray Diffraction (XRD), and texture determination. The grain and crystallite size distribution and orientation as well as defect impacts were determined. Anelastic Spectroscopy (AS) on mechanically deformed samples have shown that the temperature of ECAP differentiate the fragile to ductile regime. MgH2 consolidated powders were checked for using AS to detect potential hydrogen motions and interaction with host metal atoms. After further optimization, the different mechanically-treated samples were submitted to hydrogenation/dehydrogenation (H/D) cycles, which shows that, for a few passes, the BC mode is better than the A one, as supported by theoretical and experimental microstructure analyses. Accordingly, the hydrogen uptake and (H/D) reactions were correlated with the optimized microstructure peculiarities and interpreted in terms of Johnson-Avrami- Mehl-Kolmogorov (JAMK) and Jander models, successively.

7 July 2020 in Energies
Verified
Journal Article
Open access
PDF file
PRPatricia De Rango
Patricia De Rango
JWJING WEN
JING WEN
Nataliya  SkryabinaNataliya Skryabina
Nataliya Skryabina
LLLaetitia LAVERSENNE
Laetitia LAVERSENNE
DFDaniel Fruchart
Daniel Fruchart
MBMarielle Borges
Marielle Borges
Fast forging of compacts made up of Mg and Ni powders is shown to be an effective method to induce severe plastic deformation with improved H2 sorption properties. Here, using such processed samples, a comprehensive analysis of the sorption properties reveals that the first hydrogenation sequence significantly depends on the forging temperature, through different microstructures. More in detail, no phase transformation occurs upon cold forging, while solid-state reaction leads to the formation of the Mg2Ni intermetallic compound upon forging above 400 °C. Forging below the brittle-to-ductile transition (225–250 °C) leads to faster H2 uptake upon first absorption owing to a more textured fiber along the c-axis and internal strains which promote hydrogen diffusion through the bulk material. Desorption kinetics remain slower with low-temperature forging, despite Ni recombining to form Mg2Ni during the first desorption. After several cycles, a two-step behavior is observed with a fast absorption step occurring up to about 3 wt.%. Despite this limited uptake performance, the forging process can be considered as a straightforward, safe, and cost-efficient process to produce large amounts of Mg-based alloys for hydrogen storage. In particular, such severe plastic deformation processes can be considered as reliable substitutes for ball-milling, which is highly efficient but energy- and time-consuming.

15 December 2021 in PNRPU Mechanics Bulletin
Verified
Journal Article
Open access
PDF file
VAV. N Aptukov
V. N Aptukov
ITI. I. Tsirulnik
I. I. Tsirulnik
Nataliya  SkryabinaNataliya Skryabina
Nataliya Skryabina
Daniel FruchartDaniel Fruchart
Daniel Fruchart
ЦИЦирульник Ю. И
Цирульник Ю. И
ФДФрушар Д.
Фрушар Д.
There are many different systems of an autonomous energy storage including accumulators and storage devices for renewable energy. Systems based on reversible metal hydrogenation have recently been introduced. The selection of metals is based on considerations of temperature and pressure conditions of the hydrogenation/dehydrogenation cycle, as well as the desired storage hydrogen capacity. Magnesium is one of the main challenging metals with respect to these main conditions since having a hydrogen capacity up to 7.6 w.%. For Mg forming MgH2, it was soon established that the size of particles plays a critical role since the kinetics (rate) of hydride formation accelerates when the size of the particles decreases. The present study shows that the overall diameter of the particles is the main characteristic controlling the kinetics of hydride formation because of distinct issues. A distribution of the size entails a strong dispersion transferring the heat of reaction, which characterizes Mg to MgH2 phase transition. Moreover, the formation of MgH2, is accompanied by a great increase of the unit-cell volume, developing noticeable internal stresses within the surface layers of the particles, thus turning to a systematic flaking and a systematic decrease of sizes of the powder particles. The results of the numerical modeling comply with the experimental data. This makes it possible to predict the best size of the initial Mg powder able to achieve fast kinetics during hydrogenation. Furthermore, the present analysis demonstrates the best hydrogenation kinetics, not only when using fine powders, but also when the deviation from the average particle size is minimized.

15 December 2022 in PNRPU Mechanics Bulletin
Verified
Journal Article
Open access
PDF file
VAV. N Aptukov
V. N Aptukov
Nataliya  SkryabinaNataliya Skryabina
Nataliya Skryabina
Daniel FruchartDaniel Fruchart
Daniel Fruchart
СЕСкрябина Н. Е
Скрябина Н. Е
ФДФрушар Д.
Фрушар Д.
In the present article we consider a novel approach to analyze the processes and kinetics of transformation of magnesium to hydride. Here approach consists to take into account the contributions of mechanics factors such as the work of external forces, the energy of elastic deformation and the energy required to form a unit volume nucleate of new phase. Request for a stable state of either a mechanical system or thermodynamic conditions governing a phase transformation, is to determine a minimum value to the total energy of the system. Analyzing the stability conditions needed when forming a metal hydride nucleus at constant temperature and pressure needs to consider the following: - the volumetric effects at the phase transformation, - the ratio of elastic moduli of metal to hydride phase, - the work spent at the formation of a unit volume of hydride. Under these considerations, it was shown that the most energetically favorable is forming an ellipsoidal hydride nucleus. Moreover, the larger difference in semi-axes, the more stable ellipsoid nucleus. Then, calculations of the stress-strain level states on both sides of the metal/hydride interface have been carried out. It was shown that the near-boundary range during the phase transformation is the place where accumulate inhomogeneous and intense stresses, which can contribute to two parallel processes. Firstly, increase of hydrogen concentration could appear in the distorted area. Secondly, a local accumulation of incoherent boundaries in between the two phases will develop stresses exceeding by more twice the shear yield stress. The presence of these compression zones could give rise new defects such as dislocations, micro-cracks. Consequently this should lead to decrease in magnitude of the powder of material.

15 December 2023 in PNRPU Mechanics Bulletin
Verified
Journal Article
Open access
PDF file
VAV. N. Aptukov
V. N. Aptukov
Nataliya  SkryabinaNataliya Skryabina
Nataliya Skryabina
Daniel FruchartDaniel Fruchart
Daniel Fruchart
ФДФрушар Д.
Фрушар Д.
Hydrogen, one of the most abundant elements in nature, is potentially suitable to produce, store and consume clean energy, namely for various industrial uses. The safest technique for hydrogen storage is metal hydride, e.g. as MgH2, with safe facilities to store and transport. A critical indicator of a metal-hydrogen system is the kinetic of hydrogen sorption, which is known particularly low for magnesium. However, under given thermodynamic conditions, the kinetics of magnesium/hydrogen reaction is especially sensitive to the particle size i.e. specific surface, crystallite/grain size i.e. boundary extension and nature of potential additives as catalysts. The present calculations aimed at determining the occurrence of hydride nucleation are based on a new energy ratio, as proposed at first time, which takes into account both physicschemical and mechanical factors. The calculations of the energy ratio are based on the minimum total energy of the system, which correctly reflects the processes occurring during hydride formation in magnesium. The critical size of a nucleus at the phase formation (hydride) in magnesium is controlled by the ratio of the volume and surface area of the emerging component, similarly to a crystallization process from a solution. The influence of the mechanical response of the system to the formation of hydride allows one to propose an interpretation of some phenomena regularly recorded during such experiments, i.e. the influence of special additives and mechanical texture, which lead to the acceleration of hydride formation. The results obtained suggest a mechanism favoring oriented nucleation of the hydride in a textured magnesium matrix thanks to the anisotropy of the elastic characteristics of the newly formed phase.