Magnetometers based on the anisotropic magnetoresistive effect are used in many applications for orientation determination, by measuring the magnetic field of the Earth. As sensors of this type are commercial, off-the-shelf components, manufacturers provide limited information on their measurement performance. Therefore, we present a (to date) unprecedented comprehensive calibration study on three state-of-the-art digital anisotropic magnetoresistance magnetometers, to precisely determine various performance parameters and stability across different sensors of the same model. With the evaluation of sensitivity, noise, offset, and orientation determination, as well as considering dependencies on temperature and frequency, the performance of each sensor can be improved significantly, enabling their implementation in demanding fields of application (such as in satellites). Different measurement and calibration techniques, specifically aimed at the characteristics of the examined magnetometers, were utilized, using a sophisticated magnetic laboratory that has served as a calibration facility for several interplanetary space missions. Our study allows operators to decide whether to consider anisotropic magnetoresitance magnetometers for their application and, more importantly, to be able to (at least partially) skip a time-intensive and complicated calibration by using the sensor parameters given in this paper. To that end, the most promising sensor is recommended. The sensor examination suggests a good comparability of different sensors of the same model, and shows the importance of noise regarding the sensor performance with a noise floor up to 124 nT/ at 1 Hz. Additionally, depending on the sensor model, the sensitivity is 14 nT at best, and the attitude determination error can be reduced to about 0.3° with the given calibration.
Observations and present knowledge of heavy ions with mass ≥ 27 in the magnetosphere are reviewed. There are four ultimate sources of these heavy ions: the solar wind (mainly high charge-state atomic ions), the ionosphere (mainly molecular ions), the atmospheric metal layers that originate ultimately from ablation of meteoroids and possibly space debris (low charge-state metallic ions and metal-rich molecular ions), and lunar surface and exosphere (low charge-state metallic and molecular ions). The upstream heavy ions (solar wind origin and lunar origin) give independent information on the ion entry routes to the magnetosphere from proton (H+) and alpha particles (He++): with similar mass-per-charge (m/q) values, or gyroradius, for the solar wind origin, and much larger gyroradius for the lunar origin. The lunar origin ions also give independent insights from laboratory observations on the sputtering processes. The atmospheric origin molecular and metallic ions are essential in understanding energization, ionization altitudes, and upward transport in the ionosphere during various ionospheric and magnetospheric conditions. These ions are also important when considering the evolution of the Earth’s atmosphere on the geological timescale. Only a few terrestrial missions have been equipped with instrumentation dedicated to separate these molecular and metallic ions, within only a limited energy range (cold ions of < 50 eV and energetic ions of ∼ 100 keV or more) and a limited mass range (mainly ≤ 40 amu). This is far too limited to make any quantitative discussion on the very heavy ions in the magnetosphere. For example, the existing data are far from sufficient for determining the dominant contributor from the four possible sources, or even to rule out any of the possible sources as a substantial contributor. Under this circumstance, it is worth to re-examine, using available tools, the existing data from the past and on-going missions, including those not designed for the required mass separation, to search for these ions. The purpose of this review is to summarize the availability of these datasets and tools. This review also shows some examples of combinations of different datasets that provide important indications of the sources of these heavy ions and their amounts that have been overlooked to date. Finally, we note the possible future contamination of specific masses (mainly aluminum (Al), but also lithium (Li), iron (Fe), nickel (Ni), copper (Cu), titanium (Ti) and germanium (Ge)) by the ablation of re-entering human-made objects in space (debris and alive satellites) in the coming decades. This possibility argues the need for dedicated observations of magnetospheric and ionospheric metallic ions before these metallic ions of space debris origin start to dominate over the natural contribution. The required observations can be performed with the available designs of space instrumentation and available ground-based instruments.
19 February 2026 in Communications Earth & Environment
A 10-fold enhancement of lithium atoms was detected at 96 km altitude by a resonance lidar at Kühlungsborn, Germany, approximately 20 hours after the uncontrolled re-entry of a Falcon 9 upper stage. The upper-atmospheric extension of the ICON general circulation model, nudged to ECMWF, was used to calculate winds. Backwards trajectories, including wind variability as measured by radar, traced air masses to the Falcon 9 re-entry path at 100 km altitude, west of Ireland. This study presents the first measurement of upper-atmospheric pollution resulting from space debris re-entry and the first observational evidence that the ablation of space debris can be detected by ground-based lidar. The analysis of geomagnetic conditions, atmospheric dynamics, and ionospheric measurements supports the claim that the enhancement was not of natural origin. Our findings demonstrate that identifying pollutants and tracing them to their sources is achievable, with significant implications for monitoring and mitigating space emissions in the atmosphere.
Spacecraft constellations consisting of multiple satellites are more and more becoming of interest not only for commercial, but also for space science missions. The proposed and accepted scientific multi-satellite missions to operate within Earth's magnetospheric environment, like HelioSwarm, require extending established methods for the analysis of multi-spacecraft data to more than four spacecraft. The wave telescope is one of those methods. It is used to detect waves and characterize turbulence from multi-point magnetic field data, by providing spectra in reciprocal position-space. The wave telescope can be applied to an arbitrary number of spacecraft already. However, the exact limits of the detection for such cases are not known if the spacecraft, acting as sampling points, are irregularly spaced. We extend the wave telescope technique to an arbitrary number of spatial dimensions and show how the characteristic upper detection limit in k-space imposed by aliasing, the spatial Nyquist limit, behaves for irregular spaced sampling points. This is done by analyzing wave telescope k-space spectra obtained from synthetic plane wave data in 1D up to 3D. As known from discrete Fourier transform methods, the spatial Nyquist limit can be expressed as the greatest common divisor in 1D. We extend this to arbitrary numbers of spatial dimensions and spacecraft. We show that the spatial Nyquist limit can be found by determining the shortest possible basis of the spacecraft distance vectors. This may be done using linear combination in position-space and transforming the obtained shortest basis to k-space. Alternatively, the shortest basis can be determined mathematically by applying the Modified Lenstra-Lenstra-Lovász algorithm (MLLL) combined with a lattice enumeration algorithm. Thus, we give a generalized solution to the determination of the spatial Nyquist limit for arbitrary numbers of spacecraft and dimensions without any need of a priori knowledge of the measured data. Additionally, we give first insights on the application to real-world data incorporating spacecraft position errors and minimizing k-space aliasing. As the wave telescope is an estimator for a multi-dimensional Fourier transform, the results of this analysis can be applied to Fourier transform itself or other Fourier transform estimators making use of irregular sampling points. Therefore, our findings are also of interest to other fields of signal processing.