The determination of the relative isotopic abundance by secondary ion mass spectrometry of 236U in uranium-containing material is complicated by the presence of 235U1H+ ions at the same nominal mass as the uranium isotopic peak.
1 July 1994 in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
Contamination associated with ion implantation is reviewed with an emphasis on secondary ion mass spectrometry (SIMS) characterization. Specific examples are provided using SIMS as a tool to detect and resolve contaminant problems. This study of contamination is organized according to the path of the ion beam through an ion implanter, starting with the source and continuing to the end station. The source material, ion source components, and vacuum system can produce contaminant mass interferences that may not be eliminated by mass filtration in the implanter. A table of possible mass interferences is provided. The mass resolution of the implanter may be insufficient to remove adjacent masses and therefore may permit additional contaminants in the mass-analyzed ion beam. Charge exchange and molecular ion dissociation due to poor vacuum can occur at several locations in the implanter, especially after mass separation but before final acceleration. Detailed examples of BF2 dissociation are presented. Collisions of the ion beam with end station components result in low energy deposition of contaminants that can be driven into the target by the ion implanting beam. The fluence of the species of interest can be in error. Examples of multiple contaminant sources are also provided.
We have investigated the use of negative molecular oxygen primary ion beams (i.e., O2− and O3−) to determine the benefits of using such beams for uranium particle SIMS analyses.
28 February 2020 in Journal of Physics Communications
We report on the growth of isotopically enriched 28Si epitaxial films with precisely controlled enrichment levels, ranging from natural abundance ratio of 92.2% all the way to 99.99987% (0.832 × 10−6 mol mol−1 29Si). Isotopically enriched 28Si is regarded as an ideal host material for semiconducting quantum computing due to the lack of 29Si nuclear spins. However, the detailed mechanisms for quantum decoherence and the exact level of enrichment needed for quantum computing remain unknown. Here we use hyperthermal energy ion beam deposition with silane gas to deposit epitaxial 28Si. We switch the mass selective magnetic field periodically to control the 29Si concentration. We develop a model to predict the residual 29Si isotope fraction based on deposition parameters and measure the deposited film using secondary ion mass spectrometry (SIMS). The measured 29Si concentrations show excellent agreement with the prediction, deviating on average by only 10%.
2 September 2005 in Surface and Interface Analysis