Foundation effects play a crucial role in sandwich fracture specimens with a soft core. Accurate estimation of deformation characteristics at the crack front is vital in understanding compliance, energy release rate and mode-mixity in fracture test specimens. Beam on elastic foundation analysis of moment- and force-loaded single cantilever beam sandwich fracture specimens is presented here. In addition, finite element analysis of the single cantilever beam specimen is conducted to determine displacements, rotations, energy release rate and mode-mixity. Based on finite element analysis, a foundation modulus is proposed that closely agrees with the numerical compliance and energy release rate results for all cases considered. An analytical expression for crack root rotation of the loaded upper face sheet provides consistent results for both loading configurations. For the force-loaded single cantilever beam specimen (in contrast to the moment-loaded case), it was found that the crack length normalized energy release rate and the mode-mixity phase angle increase strongly as the crack length decreases, a result of increased dominance of shear loading.
Fracture testing of aerospace grade honeycomb core sandwich composites is carried out using the Double Cantilever Beam specimen loaded with Uneven Bending Moments, and a Double Cantilever Beam–Uneven Bending Moment test rig capable of applying pure moments is utilized. Specimens with carbon fiber-reinforced plastic face sheets are employed with a range of honeycomb core grades comprising of Nomex® and Kevlar paper. The sandwich specimens are reinforced with steel doublers to reduce excessive rotation of the face sheets. The mode mixity phase angle pertaining to a particular ratio of moments between the two arms of the Double Cantilever Beam specimen is determined using the numerical mode mixity method—Crack Surface Displacement Extrapolation method. For Nomex® honeycomb core sandwich specimens, it is observed that the mode I interface fracture toughness increases with increase in core density. The interface fracture toughnesses for Nomex®-based honeycomb cores are also compared against specimens with Kevlar paper-based honeycomb cores. Crack propagation is observed at the interface just beneath the meniscus layer for the majority of the tested specimen configurations. The Double Cantilever Beam–Uneven Bending Moment test methodology with the concept of direct application of moments on both crack flanks has proven to have a significant potential for mixed mode face/core fracture characterization of aerospace grade sandwich composites.
The single cantilever beam sandwich specimen has been proposed, as a fracture test standard for mode I peel loading. Critical parameters, including specimen dimensions, determine whether the crack propagates along the face/core interface in mode I during the fracture test. This paper outlines a parametric study based on a numerical method to examine local mode mixity conditions for a wide array of sandwich systems by varying several geometrical and material parameters. The thickness and modulus of the face sheet were seen to influence the mode mixity for most sandwich systems. Core Poisson’s ratio was shown to influence the local mode mixity and has the capability of driving the crack along the interface or into the core. The effect of the intact specimen length was analyzed and presented from a mode mixity perspective based on various elastic foundation modulus expressions. Reinforcement of the single cantilever beam specimen with stiff layers was also investigated numerically and compared with a similar analysis in the literature. The analysis presented in this paper shows that, despite reducing the global shear component, the local mode mixity condition deviated away from the mode I regime for several sandwich specimens. An appropriate foundation model along with a minimum loading rod length was one of the recommendations provided from the analyses, which may supplement the ASTM International standardization efforts.
Due to the prohibitive cost of transporting raw materials into Space, in-situ materials along with cement-like binders are poised to be employed for extraterrestrial construction. A unique methodology for obtaining microstructural topology of cement samples hydrated in microgravity environment at the International Space Station (ISS) is presented here. Distinctive Scanning Electron Microscopy (SEM) micrographs of hardened tri-calcium silicate (C3S) samples were used as exemplars in a deep learning-based microstructure reconstruction framework. The proposed method aids in generation of an ensemble of microstructures that is inherently statistical in nature, by utilizing sparse experimental data such as the C3S samples hydrated in microgravity. The hydrated space-returned samples had exhibited higher porosity content (~70 %) with the portlandite phase assuming an elongated plate-like morphology. Qualitative assessment of the volumetric slices from the reconstructed volumes showcased similar visual characteristics to that of the target 2D exemplar. Detailed assessment of the reconstructed volumes was carried out using statistical descriptors, and was further compared against micro-CT virtual data. The reconstructed volumes captured the unique microstructural morphology of the hardened C3S samples of both space-returned and ground-based samples, and can be directly employed as Representative Volume Element (RVE) to characterize mechanical/transport properties.