Currently, small islands are facing an energy supply shortage, which has led to considerable concern. Establishing an island microgrid is a relatively good solution to the problem. However, high investment costs restrict its application. In this paper, micro pumped storage (MPS) is used as an energy storage system (ESS) for islands with good geographical conditions, and deferrable appliance is treated as the virtual power source which can be used in the planning and operational processes. Household acceptance of demand response (DR) is indicated by the demand response participation degree (DRPD), and a sizing optimization model for considering the demand response of household appliances in an island microgrid is proposed. The particle swarm optimization (PSO) is used to obtain the optimal sizing of all major devices. In addition, the battery storage (BS) scheme is used as the control group. The results of case studies demonstrate that the proposed method is effective, and the DR of deferrable appliances and the application of MPS can significantly reduce island microgrid investment. Sensitivity analysis on the total load of the island and the water head of the MPS are conducted.
The simulation model is one of the key points affecting the optimal planning and operation of energy hubs (EHs). Since treating the efficiencies of generation units as constants would significantly simplify the calculation, only a simplified model is investigated in most research works. In this paper, aiming at optimizing the capacity configuration of an EH, we present a part-load characteristics-based (PLCB) model, in which the efficiencies of generation units will change with the fluctuating load. Based on the PLCB model, the accuracy of the EH model can be improved. Furthermore, a two-stage planning method is proposed to solve the optimal capacity configuration problem of the EH. Group Search Optimizer (GSO) is used to determine the optimal size in the first stage, and a mathematical programming method is applied to obtain the optimal operation of the EH in the second stage. Comparative studies using the PLCB model and the simplified model are performed to examine the impacts of equipment part-load characteristics on the sizing results. Simulation results indicate that the proposed model appears to have a better economic performance than the simplified model.
21 June 2018 in IET Generation, Transmission & Distribution
The location of public electric vehicle charging stations (PEVCSs) has a great influence on the operational efficiency of charging stations, charging behaviours of EVs and the power quality of grids. To optimise the PEVCS locations for plug‐in electric taxis (PETs), this study proposes to utilise the multi‐agent system (MAS) and evidential reasoning (ER) approach. First, an MAS simulation framework for PET operation is proposed to dynamically simulate the PETs’ daily operation and estimate the charging demands of PETs, where a variety of agents are built to simulate not only the operation related players but also the operational environments. To accelerate the convergence rate and provide better operational strategies for PETs, a multi‐step learning is developed to make decisions for PET agents whether to find passengers or to charge under various situations. Moreover, a multi‐objective model for optimising the location of PEVCSs is developed considering the benefits of PETs and the power grid. Finally, an ER approach is applied to determine the final optimal siting considering the uncertainties of the assessor's cognition. Simulation results have demonstrated that the proposed MAS simulation framework and ER approach can effectively optimise the PEVCS locations.
Realizing the full potential of plug-in electric vehicle (PEVs) in power systems requires the development of business models for PEV owners and electric vehicle aggregators (EVAs). Most business models neglect the significant economic potential of PEV demand response. This paper addresses this challenge by proposing a novel business model to optimize the charging energy of PEVs for maximizing the owners’ profits. The proposed business model aims to overcome the opportunity cost neglect for PEV owners, whose charging energy and charging profiles are optimized with full consideration of the demand curves and market conditions. Lagrangian relaxation technology is used for the relaxation of the constraint of satisfying the charging demand, and as a result, the optimization potential becomes greater. The bidding/offering strategy is formulated as a two-stage stochastic optimization problem, considering the different market prices and initial and target state of energy (SOE) of the PEVs. By case studies and analyses, we demonstrate that the proposed business model can effectively overcome the opportunity cost neglect and increase the PEV owners’ profits. Furthermore, we demonstrate that the proposed business model is incentive-compatible. The PEV owners will be attracted by the proposed business model.
An integrated energy system, referred to specifically as a heterogeneous energy system that combines cooling, heating, power, etc., is a dynamic system containing continuous as well as discrete behaviors on both technical and economic levels. Currently, the comprehensive utilization of multiple forms of energy and the implementation of the energy market have made the simulation of such a system very complicated, which is reflected in two aspects. First, the simulation model becomes complex and varied. Second, the time-varying characteristics of the models are quite diverse. Therefore, a standard and normative modeling and simulation method is urgently needed. This work aims to obtain a compatible modeling and simulation method for the energy economy coupling system. The individual-based model is widely used to describe organisms in an ecology system that are similar to the energy–economy coupled system. Inspired by this, a general simulation approach based on the individual-based model is proposed in this paper to overcome these existing problems. The standard formal expression model is built, then its structure and elements explained in detail, and multi-scale time simulation supported to model and simulate an integrated energy system that is coupled with markets. In addition, a simulator is designed and implemented based on multi-agent framework and model-view-controller architecture. Finally, a simulation case of a conceived scenario was designed and executed, and the results analysis proved the validity and versatility of the proposed approach. The proposed method has the advantages of model standardization, multi-scale time compatibility, distributed simulation capability, and privacy protection. These advantages support and strengthen each other. Through these studies, a systematic approach was formed that could improve the standardization of modeling and simulation in the energy–economy research area.