In this study, an exergy analysis of two kinds of solar-driven cogeneration systems consisting of solar collectors and an organic Rankine cycle (ORC) is presented for series mode and parallel mode. Three kinds of solar collectors are considered: flat-plate collectors (FPC), evacuated tube collectors (ETC), and parabolic trough collectors (PTC). This study mainly compares the exergy output of the two kinds of solar cogeneration systems under different temperatures of the return heating water and different inlet temperatures of the solar collectors. This study shows that, from the perspective of Wnet or E̲n, the parallel mode is superior to the series mode. From the perspective of Ez, the parallel mode is superior to the series mode when the solar collector is FPC; however, the series mode is superior to the parallel mode when the solar collector is PTC. When the solar collector is ETC, the result depends on the temperature of the return heating water. When the temperature of the return heating water is low (below 46°C), the series mode is better, and when the temperature of the return heating water is high (above 46°C), the parallel mode is better.

In this study, the form and operation modes of a novel solar-driven cogeneration system consisted of various solar collectors (flat plat collectors (FPC), evacuated tube collectors (ETC), and parabolic trough collectors (PTC)) and ORC (organic Rankine cycle) based on building heating load are analyzed. This paper mainly obtains the fitting formula of thermal efficiency of the ORC power generation device and determines the form and operation mode of the cogeneration system. The form is the same, but the operation modes are different for PTC and FPC or ETC. There are six operating modes, respectively, based on the size relationship between the heating load of buildings and the effective heat collection of the solar collector subsystem when the solar collectors are PTC or FPC and ETC.