Nitrogen dioxide (NO2) is one of the most dangerous air pollutants that can affect human health even at the ppb (part per billion) level. Thus, the superior sensing performance of nitrogen dioxide gas sensors is an imperative for real-time environmental monitoring. Traditional solid-state sensors based on metal-oxide transistors have the drawbacks of high power consumption, high operating temperature, poor selectivity, and difficult integration with other electronics. In that respect, graphene-based gas sensors have been extensively studied as potential replacements. However, their advantages of high sensing efficiency, low power consumption, and simple electronic integration have been countered by their slow response and poor repeatability. Here, we report the fabrication of high-performance ultraviolet (UV)-assisted room temperature NO2 sensors based on chemical vapor deposition-grown graphene. UV irradiation improves the response of the sensor sevenfold with respect to the dark condition attaining 26% change in resistance at 100 ppm NO2 concentration with a practical detection limit below 1 ppm (42.18 ppb). In addition, the recovery time was shortened fivefold to a few minutes and the excellent repeatability. This work may provide a promising and practical method to mass produce room-temperature NO2 gas sensors for real-time environment monitoring due to its simple fabrication process, low cost, and practicality.
Anion-exchange-membrane water electrolysis (AEMWE) has emerged as a highly prospective technology for large-scale hydrogen production. However, its widespread application is severely restricted by the sluggish kinetics of the alkaline hydrogen evolution reaction (HER). Inspired by enzymatic cascade reactions, this work proposes a novel cascade electrocatalysis mechanism for the alkaline HER on a supported metal catalyst comprising Ru clusters and Y single atoms simultaneously immobilized on a N-doped carbon support (Ru–YNC). Specifically, oxophilic Y single atoms serve as preferential water adsorption and dissociation centers, and the generated hydrogen adsorption intermediates are promptly captured and reduced by adjacent Ru clusters owing to the different adsorption properties of Ru and Y species, thereby remarkably accelerating the alkaline HER kinetics. Consequently, the Ru–YNC exhibits an overpotential of only 22 mV at 10 mA cm−2 in 1.0 M KOH. The assembled AEMWE electrolyzer delivers a current density of 1000 mA cm−2 and a remarkable noble metal mass activity of 52.07 A mgnoble metal−1 at a cell voltage of 1.87 V. Furthermore, it shows outstanding durability over 1000 h at 500 mA cm−2 with a degradation rate of only 40 μV h−1. This work provides new insights into catalyst design and mechanism exploration for the electrochemical alkaline HER.