WxNbMoTa refractory high-entropy alloys with four different tungsten concentrations (x = 0, 0.16, 0.33, 0.53) were fabricated by laser cladding deposition. The crystal structures of WxNbMoTa alloys are all a single-phase solid solution of the body-centered cubic (BCC) structure. The size of the grains and dendrites are 20 μm and 4 μm on average, due to the rapid solidification characteristics of the laser cladding deposition. These are much smaller sizes than refractory high-entropy alloys fabricated by vacuum arc melting. In terms of integrated mechanical properties, the increase of the tungsten concentration of WxNbMoTa has led to four results of the Vickers microhardness, i.e., Hv = 459.2 ± 9.7, 476.0 ± 12.9, 485.3 ± 8.7, and 497.6 ± 5.6. As a result, NbMoTa alloy shows a yield strength (σb) and compressive strain (εp) of 530 Mpa and 8.5% at 1000 °C, leading to better results than traditional refractory alloys such as T-111, C103, and Nb-1Zr, which are commonly used in the aerospace industry.
Ceramic matrix composites (CMCs) are materials that can be engineered for high-temperature applications in various fields including aerospace, marine, etc. It is very difficult to fabricate CMCs using traditional moulding methods due to their brittleness and high hardness. Additive manufacture (AM) technology, a digital manufacturing technology, provides multiple advantages over traditional manufacturing technologies, such as fabricating geometrically complex parts, mould-free fabrication, short development cycle, etc. In this paper, various AM technologies developed for CMCs are reviewed with emphasis on mechanisms of manufacturing, characteristics of production, and recent research progresses. With the springing up of innovative ideas and pioneering work, AM technology possesses unique forming capabilities in fabricating CMCs, demonstrating strong potentials in the application of CMCs in aerospace and other fields. However, there are still many challenges of CMCs fabricated by AM technologies, i.e. poor mechanical properties and geometric accuracies; lower reinforcement volume fraction than that of traditional manufacturing processes.
1 September 2019 in Journal of Materials Processing Technology