This work aims to study numerically the moisture absorption in polymer composite reinforced with vegetable fibers using the Langmuir model which considers the existence of free and entrapped water molecules inside the material. A three-dimensional and transient modeling for describing the water absorption process inside the composite and its numerical solution via finite volume method were presented and discussed. Application has been made for polymer composites reinforced with sisal fiber. Emphasis was given to the effect of the layer thickness of fluid close to the wall of the composite in the progress of water migration. Results of the free and entrapped solute (water) concentration, local moisture content and average moisture content, at different times of process, and inside the composite were presented and analyzed. It was verified that concentration gradients of the molecules (free and entrapped) are higher in the material surface, at any time of the process, and concentration of free solute is greater than the concentration of entrapped solute. It was verified that the water layer thickness surrounding the composite strongly affects the moisture absorption rate.
The drying process can be defined how unit operation for removing water of one moist solid to an unsaturated gaseous phase due to heat transfer. Numerical simulation emerges like a tool that allows the reproduction of drying experiments using computers and suitable softwares. In this sense, this works aims to predict drying process of an industrial hollow ceramic brick inside the kiln using computational fluid dynamics analysis. For one drying temperature of 60°C, results of the drying and heating kinetics, and moisture content, velocity and temperature distributions are shown and analyzed. A comparison between predicted and experimental data of the moisture content and temperature of the brick along the process was done and a good agreement was obtained.
This work aims to numerically study the moisture absorption in polymer composites reinforced with vegetal fiber, using the diffusive model of Langmuir, which considers the existence of water molecules inside the material free to diffuse and adsorb at the capillaries walls, in the solid. A three-dimensional and transient mathematical modelling to describe the water absorption process by the composite and its numerical solution via finite volume method are presented and discussed. Results of the free solute concentration, entrapped solute concentration, local moisture content and average moisture content obtained at different instants of the process are presented and analyzed. It was verified that the concentration gradients of the molecules (free and entrapped) are higher at the material surface. In addition, as the concentration of free water increases, there is also an increase in entrapped water concentration within the material at any time of the process.
This work presents a theoretical study of the anomalous behavior of moisture transient diffusion in vegetable fiber-reinforced composites materials using Langmuir-type model. For obtain the analytical solution was used the Laplace transform technique. Results of the absorption kinetics and concentration distribution of water (free and trapped water molecules) within the material along the process are presented and analyzed. Predicted results compared to experimental data of average moisture content have shown that the model was effective for description of the phenomenon, allowing a better understanding about the effects of moisture migration mechanisms.
This work presents a non-steady state and three-dimensional mathematical modeling to predict moisture transport (based on the Langmuir-Type Model) inside the vegetable fiber-reinforced composite materials. The numerical solutions of the governing equations have been obtain using the finite-volume method. The model was apply for vegetable fiber-reinforced polymer composites. Emphasis to the geometrical dimension effect of the composite in the water absorption process was given. Results of the average moisture content, free and entrapped water molecules concentration kinetics and free and entrapped water molecules concentration distributions inside the material along the process are shown and analyzed. In the distributions of the analyzed properties, it was observed that the geometric dimensions of the composite has influence in the water absorption process.
10 September 2019 in Diffusion Foundations and Materials Applications
In the oil industry, pipelines (circular ducts) are widely used for the transportation of oil and yours derived. Because of their advantages, such as low operating cost and increased safety during transportation, pipelines have become indispensable for transporting oil in large quantities and for long distances. As an alternative to this problem, the transport of oil and water can be accomplished using ducts with an elliptical cross-section. Thus, this work has the objective of studying the flow of oil and water in cylindrical ducts with an elliptical cross-section by using the Ansys CFX software. Results of the velocity, pressure and volumetric fraction distributions of the oil and water phases are presented and analyzed. By applying the same inlet velocity to oil and water, revealed that the elliptical duct, with aspect ratio equal to 5.0, has a pressure drop less (84.2%) than the pressure drop obtained for one duct of circular cross-section (aspect ratio equal to 1.0).