Weidong Cao

Prof. Dr. Weidong Cao

China National Research Center of Pumps, Jiangsu University
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
Weidong CaoWeidong Cao
Weidong Cao
HWhe wang
he wang
JTJian Tang
Jian Tang
Guide vane submersible centrifugal pumps are a kind of submersible pump, and the fluid inside the pump is often mixed with gravel and other impurities during operation, affecting the pump’s operating efficiency and life expectancy. However, past studies on solid–liquid two-phase flow (STF) and wear characteristics in guided vane centrifugal pumps have been limited to the particle trajectory and wear region distribution. These studies have lacked research on the effect of particles on the fluid flow and the specific amount of wear on the overflow components. Additionally, most of them have used the DPM discrete-phase model, which does not consider the particle–particle and particle–wall interactions. This paper is based on the CFD–DEM method, combined with the Archard wear model. A solid–liquid two-phase flow simulation is carried out for pumps with different particle sizes and particle shapes to analyze the particle movement inside the pump, the wear distribution and average wear amount of the overflow components, and the effect of particles on the turbulent kinetic energy of the fluid. The results show that the particles mainly collide with the leading and trailing edges of the impeller blades and the leading edge of the guide vane blades and form a buildup at the trailing edge of the concave surface of the guide vane blades, resulting in the wear being mainly distributed in these regions. With an increase in particle size and a decrease in sphericity, the average wear on the overflow components increases. The change of particle size directly affects the resistance of the fluid and the structure of the flow field, which has a large impact on the fluid flow pattern and generates large turbulent kinetic energy fluctuations. The shape of the particles only changes the structure of the local flow field, which has a small impact on the fluid flow pattern.

Verified
Journal Article
Open access
PDF file
Weidong CaoWeidong Cao
Weidong Cao
HWhe wang
he wang
XYXinyu Yang
Xinyu Yang
XLXinyi Leng
Xinyi Leng
The methodologies of computational fluid dynamics (CFD) and response surface method (RSM) were integrated to uncover the optimal correlational framework for intricate hydraulic geometric parameters of guide vane centrifugal pumps. Parameters such as blade number, blade wrap angle, blade outlet angle, and relative axial distance between the guide vane and impeller, as well as radial distance, are embraced as optimization design variables. Meanwhile, pump head and efficiency were chosen as responsive variables. An analysis of 46 sets of hydraulic performance data was carried out by using the Box–Behnken experimental design method. Subsequently, response surface approximation models were established between hydraulic parameters and the efficiency, as well as the head. The optimal design point was predicted and a simulation of the hydraulic characteristics for the optimal scheme was conducted; the errors were 0.846% for head and 0.256% for efficiency between the simulation results with predicted results from RSM. The optimized model demonstrates noteworthy enhancements in hydraulic performance in comparison to the original model. By analyzing the internal flow of the optimized model under transient conditions, it was found that, as the internal flow of the flow passage components is relatively disordered at small flow rates, the amplitude of pressure pulsation is affected a lot. At other flow rates, the inside pressure pulsation waveform exhibits pronounced periodicity, and the primary causes of pressure pulsation in various flow components are not the same. Wall dissipation and turbulent dissipation emerge as significant contributors to the entropy generation in this centrifugal pump. The magnitude of entropy generation is correlated with the flow rate and the structural configuration of the pump’s components. High-entropy regions concentrate around the leading and trailing edges of the blades.

19 January 2023 in Machines
Verified
Journal Article
Open access
PDF file
CWChuan Wang
Chuan Wang
XCXionghuan chen
Xionghuan chen
JGJie Ge
Jie Ge
Weidong CaoWeidong Cao
Weidong Cao
XCXionghuan Chen
Xionghuan Chen
HCHao Chang
Hao Chang
As compared with a conventional centrifugal pump, a high-specific-speed centrifugal pump mostly operates under large flow conditions. In this paper, a typical high-specific-speed centrifugal pump is examined, and the effect of the blade number on the internal flow condition is investigated numerically. The numerical predictions have been verified through measurement. It was found that the predictions and the measurements are in good agreement of discrepancy. Serious cavitation could be observed within the pump when the flow rate reached 1300 m3/h. Meanwhile, the effect of the blade number on the cavitation intensity was extremely obvious. The cavitation area at the inlet edge of the blades significantly reduced when the blade number increased from three to six. In addition, the turbulent kinetic energy within the pump was more uniformly distributed. This demonstrates that the blade number can be reasonably chosen to improve the internal flow pattern within the pump, which could provide a theoretical basis for the practical application of high-specific-speed centrifugal pumps

7 March 2018 in SPE Journal
Verified
Journal Article
Closed access
PDF file
YLYongge Liu
Yongge Liu
JHJian Hou
Jian Hou
LLLingling Liu
Lingling Liu
KZKang Zhou
Kang Zhou
YZYanhui Zhang
Yanhui Zhang
Weidong CaoWeidong Cao
Weidong Cao
Reliable relative permeability curves of polymer flooding are of great importance to the history matching, production prediction, and design of the injection and production plan. Currently, the relative permeability curves of polymer flooding are obtained mainly by the steady-state, nonsteady-state, and pore-network methods. However, the steady-state method is extremely time-consuming and sometimes produces huge errors, while the nonsteady-state method suffers from its excessive assumptions and is incapable of capturing the effects of diffusion and adsorption. As for the pore-network method, its scale is very small, which leads to great size differences with the real core sample or the field. In this paper, an inversion method of relative permeability curves in polymer flooding is proposed by combining the polymer-flooding numerical-simulation model and the Levenberg-Marquardt (LM) algorithm. Because the polymer-flooding numerical-simulation model by far offers the most-complete characterization of the flowing mechanisms of polymer, the proposed method is able to capture the effects of polymer viscosity, residual resistance, diffusion, and adsorption on the relative permeability. The inversion method was then validated and applied to calculate the relative permeability curve from the experimental data of polymer flooding. Finally, the effects of the influencing factors on the inversion error were analyzed, through which the inversion-error-prediction model of the relative permeability curve was built by means of multivariable nonlinear regression. The results show that the water relative permeability in polymer flooding is still far less than that in waterflooding, although the residual resistance of the polymer has been considered in the numerical-simulation model. Moreover, the accuracy of the polymer parameters has great effect on that of the inversed relative permeability curve, and errors do occur in the inversed water relative permeability curve—the measurements of the polymer solution viscosity, residual resistance factor, inaccessible pore-volume (PV) fraction, or maximum adsorption concentration have errors.

23 May 2020 in Water
Verified
Journal Article
Open access
PDF file
Weidong CaoWeidong Cao
Weidong Cao
Wei LiWei Li
Wei Li
The operating range of axial flow pumps is often constrained by the onset of rotating stall. An improved method using a double inlet nozzle to stabilize the performance curve is presented in the current study; a single inlet nozzle and three kinds of double inlet nozzle with different rib gap widths at the inlet of axial flow pump impeller were designed. Three dimensional (3D) incompressible flow fields were simulated, and the distributions of turbulence kinetic energy and velocity at different flow rates located at the inlet section, as well as the pressure and streamline in the impeller, were obtained at the same time. The single inlet nozzle scheme and a double inlet nozzle scheme were studied; the experimental and numerical performance results show that although the cross section is partly blocked in the double inlet nozzle, the head and efficiency do not decline at stable operation flow rate. On small flow rate condition, the double inlet nozzle scheme effectively stabilized the head-flow performance, whereby the block induced by the backflow before the impeller was markedly improved by using a double inlet nozzle. It has also been found that the rib gap width impacts the efficiency curve of the axial flow pump.

13 September 2017 in Advances in Mechanical Engineering
Verified
Journal Article
Open access
Weidong CaoWeidong Cao
Weidong Cao
YLYao Lingjun
Yao Lingjun
LBLiu Bing
Liu Bing
ZYZhang Yining
Zhang Yining
In order to study the influence of the impeller eccentricity on the performance of centrifugal pump, the k–ε turbulence model was selected, and ANSYS CFX was provided for numerical simulation calculation of the centrifugal pump with impeller offsets of 0, 1, 3, and 5 mm. The results show that with the impeller eccentricity increasing, the head and efficiency become lower. Under the condition of rated flow, with the impeller eccentricity increasing, the area of low pressure at the suction surface of the short blade inlet become smaller gradually; however, the area of low pressure at the suction surface of the long blade inlet become larger, and the pressure at the impeller inlet and tongue become larger too. The corresponding critical net positive suction head increases in turn, as means that the cavitation performance of the pump becomes worse gradually. The bubble volume fraction in the impeller increases with the decrease of the static pressure at the inlet. The bubble first occurs at the inlet of the blade suction surface, and then extends gradually to the channel and even the outlet. Near the rated flow, radial force on the impeller and volute decreases with the increasing of flow, and the radial force characteristic becomes worse gradually with the increasing of the eccentricity.