The design of high–performance state estimators for future autonomous vehicles constitutes a challenging task, because of the rising complexity and demand for operational safety. In this application, a vehicle state observer with a focus on the estimation of the quantities position, yaw angle, velocity, and yaw rate, which are necessary for a path following control for an autonomous vehicle, is discussed. The synthesis of the vehicle’s observer model is a trade-off between modelling complexity and performance. To cope with the vehicle still stand situations, the framework provides an automatic event handling functionality. Moreover, by means of an efficient root search algorithm, map-based information on the current road boundaries can be determined. An extended moving horizon state estimation algorithm enables the incorporation of delayed low bandwidth Global Navigation Satellite System (GNSS) measurements—including out of sequence measurements—as well as the possibility to limit the vehicle position change through the knowledge of the road boundaries. Finally, different moving horizon observer configurations are assessed in a comprehensive case study, which are compared to a conventional extended Kalman filter. These rely on real-world experiment data from vehicle testdrive experiments, which show very promising results for the proposed approach.
In Kalman filter design, the filter algorithm and prediction model design are the most discussed topics in research. Another fundamental but less investigated issue is the careful selection of measurands and their contribution to the estimation problem. This is often done purely on the basis of empirical values or by experiments. This paper presents a novel holistic method to design and assess Kalman filters in an automated way and to perform their analysis based on quantifiable parameters. The optimal filter parameters are computed with the help of a nonlinear optimization algorithm. To determine and analyze an optimal filter design, two novel quantitative nonlinear observability measures are presented along with a method to quantify the dominance contribution of a measurand to an estimate. As a result, different filter configurations can be specifically investigated and compared with respect to the selection of measurands and their influence on the estimation. An unscented Kalman filter algorithm is used to demonstrate the method’s capabilities to design and analyze the estimation problem parameters. For this purpose, an example of a vehicle state estimation with a focus on the tire-road friction coefficient is used, which represents a challenging problem for classical analysis and filter parameterization.
Future electrified autonomous vehicles demand higly accurate knowledge of their system states to guarantee a high-fidelity and reliable control. This constitutes a challenging task—firstly, due to rising complexity and operational safeness, and secondly, due to the need for embedded service oriented architecture which demands a continuous development of new functionalities. Based on this, a novel model based Kalman filter framework is outlined in this publication, which enables the automatic incorporation of multiphysical Modelica models into discrete-time estimation algorithms. Additionally, these estimation algorithms are extended with nonlinear inequality constraint handling functionalities. The proposed framework is applied to a constrained nonlinear state of charge lithium-ion cell observer and is validated with experimental data.
Traffic congestion and the occurrence of traffic accidents are problems that can be mitigated by applying cooperative adaptive cruise control (CACC). In this work, we used deep reinforcement learning for CACC and assessed its potential to outperform model-based methods. The trade-off between distance-error minimization and energy consumption minimization whilst still ensuring operational safety was investigated. Alongside a string stability condition, robustness against burst errors in communication also was incorporated, and the effect of preview information was assessed. The controllers were trained using the proximal policy optimization algorithm. A validation by comparison with a model-based controller was performed. The performance of the trained controllers was verified with respect to the mean energy consumption and the root mean squared distance error. In our evaluation scenarios, the learning-based controllers reduced energy consumption in comparison to the model-based controller by 17.9% on average.
Quadratic programming problems (QPs) frequently appear in control engineering. For use on embedded platforms, a QP solver implementation is required in the programming language C. A new solver for quadratic optimization problems, EmbQP, is described, which was implemented in well readable C code. The algorithm is based on the dual method of Goldfarb and Idnani and solves strictly convex QPs with a positive definite objective function matrix and linear equality and inequality constraints. The algorithm is outlined and some details for an efficient implementation in C are shown, with regard to the requirements of embedded systems. The newly implemented QP solver is demonstrated in the context of control allocation of an over-actuated vehicle as application example. Its performance is assessed in a simulation experiment.
In vertical vehicle dynamics control, semi-active dampers are used to enhance ride comfort and road-holding with only minor additional energy expenses. However, a complex control problem arises from the combined effects of (1) the constrained semi-active damper characteristic, (2) the opposing control objectives of improving ride comfort and road-holding, and (3) the additionally coupled vertical dynamic system. This work presents the application of Reinforcement Learning to the vertical dynamics control problem of a real street vehicle to address these issues. We discuss the entire Reinforcement Learning-based controller design process, which started with deriving a sufficiently accurate training model representing the vehicle behavior. The obtained model was then used to train a Reinforcement Learning agent, which offered improved vehicle ride qualities. After that, we verified the trained agent in a full-vehicle simulation setup before the agent was deployed in the real vehicle. Quantitative and qualitative real-world tests highlight the increased performance of the trained agent in comparison to a benchmark controller. Tests on a real-world four-post test rig showed that the trained RL-based controller was able to outperform an offline-optimized benchmark controller on road-like excitations, improving the comfort criterion by about 2.5% and the road-holding criterion by about 2.0% on average.