The evolution of multipurpose sensors over the last decades has been investigated with the aim of developing innovative devices with applications in several fields of technology, including in the food industry. The integration of such sensors in food packaging technology has paved the way for intelligent food packaging. These integrated systems are capable of providing reliable information about the quality of the packed products during their storage period. To accomplish this goal, intelligent packs use a variety of sensors suited for monitoring the quality and safety of food products by recording the evolution of parameters like the quantity of pathogen agents, gases, temperature, humidity and storage period. This technology, when combined with IoT, is able to provide a lot more information than conventional food inspection technologies, which are limited to weight, volume, color and aspect inspection. The original system described in this work relies on a simple but effective method of integrated food monitoring, right at the client home, suitable for user prepared vacuum-packed foods. It builds upon the IoT concept and is able to create a network of interconnected devices. By using this approach, we are able to combine actuators and sensing devices also providing a common operating picture (COP) by sharing information over the platforms. More precisely, our system consists of gas, temperature and humidity sensors, which provide the essential information needed for evaluating the quality of the packed product. This information is transmitted wirelessly to a computer system providing an interface where the user can observe the evolution of the product quality over time.

Many fields of human activity benefit from the ability to create images of obscured objects placed behind walls and to map their displacement in a noninvasive way. Usually, imaging devices like Synthetic Aperture Radars (SAR) and Ground Penetrating Radars (GPR) use expensive dedicated electronics which results in prohibitive prices. This paper presents the experimental implementation and the results obtained from an imaging system capable of performing SAR imaging and interferometric displacement mapping of targets located behind walls, as well as 3D GPR imaging using a low-cost general-purpose radar sensor. The proposed solution uses for the RF section of the system a K-band microwave radar sensor module implementing Frequency Modulated Continuous Wave operation. The low-cost sensor was originally intended for simple presence detection and ranging for domestic applications. The proposed system was tested in several scenarios and proved to operate as intended for a fraction of the cost of a commercial imaging device.