Structural changes of MoO₃ thin films deposited on thick copper substrates upon annealing at different temperatures were investigated via ex situ X-Ray Absorption Spectroscopy (XAS). From the analysis of the X-ray Absorption Near-Edge Structure (XANES) pre-edge and Extended X-ray Absorption Fine Structure (EXAFS), we show the dynamics of the structural order and of the valence state. As-deposited films were mainly disordered, and ordering phenomena did not occur for annealing temperatures up to 300 °C. At ~350 °C, a dominant α-MoO₃ crystalline phase started to emerge, and XAS spectra ruled out the formation of a molybdenum dioxide phase. A further increase of the annealing temperature to ~500 °C resulted in a complex phase transformation with a concurrent reduction of Mo⁶⁺ ions to Mo⁴⁺. These original results suggest the possibility of using MoO₃ as a hard, protective, transparent, and conductive material in different technologies, such as accelerating copper-based devices, to reduce damage at high gradients.

A proposal for building a Free Electron Laser, EuPRAXIA@SPARC_LAB, at the Laboratori Nazionali di Frascati, is at present under consideration. This FEL facility will provide a unique combination of a high brightness GeV-range electron beam generated in a X-band RF linac, a 0.5 PW-class laser system and the first FEL source driven by a plasma accelerator. The FEL will produce ultra-bright pulses, with up to 10 ${}^{12}$ photons/pulse, femtosecond timescale and wavelength down to 3 nm, which lies in the so called “water window”. The experimental activity will be focused on the realization of a plasma driven short wavelength FEL able to provide high-quality photons for a user beamline. In this paper, we describe the main classes of experiments that will be performed at the facility, including coherent diffraction imaging, soft X-ray absorption spectroscopy, Raman spectroscopy, Resonant Inelastic X-ray Scattering and photofragmentation measurements. These techniques will allow studying a variety of samples, both biological and inorganic, providing information about their structure and dynamical behavior. In this context, the possibility of inducing changes in samples via pump pulses leading to the stimulation of chemical reactions or the generation of coherent excitations would tremendously benefit from pulses in the soft X-ray region. High power synchronized optical lasers and a TeraHertz radiation source will indeed be made available for THz and pump–probe experiments and a split-and-delay station will allow performing XUV-XUV pump–probe experiments.

The analysis of particulate matter (PM) in dilute solutions is an important target for environmental, geochemical, and biochemical research. Here, we show how microdrop technology may allow the control, through the evaporation of small droplets, of the deposition of insoluble materials dispersed in a solution on a well-defined area with a specific spatial pattern. Using this technology, the superficial density of the deposited solute can be accurately controlled. In particular, it becomes possible to deposit an extremely reduced amount of insoluble material, in the order of few μg on a confined area, thus allowing a relatively high superficial density to be reached within a limited time. In this work, we quantitatively compare the microdrop technique for the preparation of particulate matter samples with the classical filtering technique. After having been optimized, the microdrop technique allows obtaining a more homogeneous deposition and may limit the sample amount up to a factor 25. This method is potentially suitable for many novel applications in different scientific fields such as demanding spectroscopic studies looking at the mineral fraction contained in ice cores or to pollution investigations looking at the detection of heavy metals present in ultra-trace in water.

Large electric gradients are required for a variety of new applications, notably including the extreme high brightness electron sources for X-ray free electron lasers (FELs), radio-frequency (RF) photo-injectors, industrial and medical accelerators, and linear accelerators for particle physics colliders. In the framework of the INFN-LNF, SLAC (USA), KEK (Japan), UCLA (Los Angeles) collaboration, the Frascati National Laboratories (LNF) are involved in the modelling, development, and testing of RF structures devoted to particles acceleration by high gradient electric fields of particles through metal devices. In order to improve the maximum sustainable gradients in normal-conducting RF-accelerating structures, both the RF breakdown and dark current should be minimized. To this purpose, studying new materials as well as manufacturing techniques are mandatory to identify better solutions to such extremely requested applications. In this contribution, we discuss the possibility of using a dedicated coating on a solid copper sample (and other metals) with a relatively thick film to improve and optimize breakdown performances and to minimize the dark current. We present here the first characterization of MoO₃ films deposited on copper by pulsed-laser deposition (PLD).

In this work, we show the damage induced by an intense coherent terahertz (THz) beam on copper surfaces. The metallic surface was irradiated by multiple picosecond THz pulses generated by the Free Electron Laser (FEL) at the ISIR facility of the Osaka University, reaching an electric field on the sample surface up to ~4 GV/m. No damage occurs at normal incidence, while images and spectroscopic analysis of the surface point out a clear dependence of the damage on the incidence angle, the electric field intensity, and polarization of the pulsed THz radiation. Ab initio analysis shows that the damage at high incidence angles could be related to the increase of the absorbance, i.e., to the increase of the temperature around or above 1000 °C. The experimental approach we introduced with multiple fast irradiations represents a new powerful technique useful to test, in a reproducible way, the damage induced by an intense electric gradient on copper and other metallic surfaces in view of future THz-based compact particle accelerators.

Airborne dust extracted from deep ice core perforations can provide chemical and mineralogical insight into the history of the climate and atmospheric conditions, with unrivalled temporal resolution, time span and richness of information. The availability of material for research and the natural complexity of the particulate, however, pose significant challenges to analytical methods. We present the developments undertaken to optimize the experimental techniques, materials and protocols for synchrotron radiation-based analysis, in particular for the acquisition of combined Synchrotron Radiation X-Ray Fluorescence and X-ray Absorption Spectroscopy data.