Cement manufacturing is one of the most energy and CO2 intensive industries. With the growth of cement production, CO2 emissions are increasing rapidly too. Carbon capture and storage is the most feasible new technology option to reduce CO2 emissions in the cement industry. More research on environmental impacts is required to provide the theoretical basis for the implementation of carbon capture and storage in cement production. In this paper, GaBi software and scenario analysis were employed to quantitatively analyze and compare the environmental impacts of cement production with and without carbon capture and storage technology, from the perspective of a life-cycle assessment; aiming to promote sustainable development of the cement industry. Results of two carbon capture and storage scenarios show decreases in the impacts of global warming potential and some environmental impacts. However, other scenarios show a significant increase in other environmental impacts. In particular, post-combustion carbon capture technology can bring a more pronounced increase in toxicity potential. Therefore, effective measures must be taken into account to reduce the impact of toxicity when carbon capture and storage is employed in cement production. CO2 transport and storage account for only a small proportion of environmental impacts. For post-combustion carbon capture, most of the environmental impacts come from the unit of combined heat and power and carbon capture, with the background production of MonoEthanolAmine contributing significantly. In combined heat and power plants, natural gas is more advantageous than a 10% coal-saving, and thermal efficiency is a key parameter affecting the environmental impacts. Future research should focus on exploring cleaner and effective absorbents or seeking the alternative fuel in combined heat and power plants for post-combustion carbon capture. If the power industry is the first to deploy carbon capture and storage, oxy-combustion carbon capture is an excellent choice for the cement industry.
In recent years, the rapid development of the rare earth industry has had a serious impact on the environment. Some enterprises have taken measures to improve the production process. In order to explore the sustainability of this industry and these improvements’ environmental benefits, this paper combines emergy analysis and lifecycle assessment to evaluate and compare the production process of rare-earth oxides considering the three aspects of emergy flow, pollutant emissions, and emergy-based indicators. Changes in the emergy of pollutant emissions before and after improvement of the production process are discussed. The results show that the greatest inputs in the mining and beneficiation stage and smelting separation stage are labor force and service and non-renewable resources, respectively. These two production stages are highly dependent on external input and have weak competitiveness. Both stages place great pressure on the environment, so the bastnasite production process would be unsustainable in the long term. After the improvement, the environmental impact of the production process for bastnaesite changed significantly, indicating that the improvement effect of the wastewater treatment facilities and the change of fuel from coal to natural gas is remarkable.
The rapid development of electric vehicles (EVs) will inevitably consume substantial scarce resources, posing risks and challenges to their supply chains. From a life cycle perspective, this study innovatively incorporates charging piles (CPs) into the research scope. Six scenarios are established to quantitatively analyze the scrap and recovery volume of 20 metallic and 3 non-metallic strategic mineral resources in lithium-ion batteries (LIBs) and CPs for China’s passenger EVs during 2010–2050. Under six scenarios, the results show that Al in LIBs and Fe in CPs have the highest scrap volumes, increasing from 2.69 t in 2010 to 2.98 × 106 t in 2050 and from 34.76 t in 2024 to 1.14 × 106 t in 2050, respectively. In contrast, Co in LIBs and Zr in CPs have the smallest scrap volumes, increasing from 0.22 t in 2012 to 8.25 × 104 t in 2050 and from 8.8 × 10−7 t in 2024 to 1.52 × 10−5 t in 2050, respectively. Over 97% of Li, Co, Ni, and Al originates from LIBs during 2026–2050, while Fe and Cu from CPs show notable growth, underscoring recycling urgency. Recycle-demand analysis in LIB reveals the gap rate for nine elements. Seven elements’ gap rates are 0.39–0.81 (GI = 80%) and 0.25–0.75 (GI = 100%), while Fe’s gap rate turns to 0 in 2045 due to LFP phase-out and P’s gap rate reaches −1.22 (GI = 80%) and −1.77 (GI = 100%) in 2045 before rebounding.