The powertrain efficiency deeply affects the performance of off-road vehicles like wheel loaders in terms of fuel economy, load capability, smooth control, etc. The hydrostatic transmission (HST) systems have been widely adopted in off-road vehicles for providing large power density and continuous variable control, yet using relatively low efficiency hydraulic components. This paper presents a hydrostatic-mechanical power split transmission (PST) solution for a 10-ton wheel loader for improving the fuel economy of a wheel loader. A directly-engine-coupled HST solution for the same wheel loader is also presented for comparison. This work introduced a sizing approach for both PST and HST, which helps to make proper selections of key powertrain components. Furthermore, this work also presented a multi-domain modeling approach for the powertrain of a wheel loader, that integrates the modeling of internal combustion (IC) engine, hydraulic systems, mechanical transmission, vehicle(wheel) dynamics, and relevant control systems. In this modeling, an engine torque evaluation method with a throttle position control system was developed to describe the engine dynamics; a method to express the hydraulic loss of the axial piston hydraulic pump/motor was developed for modeling the hydraulic transmission; and a vehicle velocity control system was developed based on altering the displacement of a hydraulic unit. Two powertrain models were developed, respectively, for the PST and HST systems of a wheel loader using MATLAB/Simulink. The simulation on a predefined wheel loader drive cycle was conducted on both powertrain models to evaluate and compare the performance of wheel loader using different systems, including vehicle velocity, hydraulic displacement control, hydraulic torque, powertrain efficiency, and engine power consumption. The simulation results indicate that the vehicle velocity controller developed functions well for both the PST and HST systems; a wheel loader using the proposed PST solution can overall save about 8% energy consumption compared using an HST solution in one drive cycle. The sizing method and simulation models developed in this work should facilitate the development of the powertrains for wheel loaders and other wheeled heavy vehicles.
The high-speed valve with advanced performance, which is expected to possess characteristics of large nominal flow and fast response at the same time, plays an important role in enabling efficient digital hydraulics. In order to solve the tradeoff between a large rated flow and less response time, this paper proposed a novel design of high-speed valve actuator called energy coupler actuator (ECA) based on the shear working mode of magnetorheological fluid. The ECA allows a rotary energy source couple/decouple the translational valve spool for fast and long stroke on/off switching. This work developed a multi-physics model of ECA to study its performance and simulation work based on response surface method has been conducted to optimize the ECA design parameters. An ECA prototype with the optimal design solution has been manufactured and experimentally tested. The testing results shows that driven by the power level similar to off-the-shelf solenoid valves, this ECA prototype only took 5 ms to achieve 1.5 mm stroke, which provide a flow area equivalent to a nominal flow of 100 l min −1 @5 bar. This prototype also demonstrated the ECA’s design feature of long stroke with quick response by achieving 7 mm stroke in just 16 ms.
17 February 2021 in Journal of Micromechanics and Microengineering
The 3D bio-printing has been developed as an effective approach to artificially create tubular tissue structures, which have been frequently found in body and organ systems. China Agricultural University (CAU) has developed a laboratory 3D bio-printer that can create tubular structures with the encapsulation of microfluidic channel. In order to create a tubular structure with more effective micro-channel encapsulation for better nutrient delivery and chemical stimulation, this work presents a design optimization of co-axial dispensing nozzle of this 3D bio-printer. In this study, an experimentally validated two-phase flow computational fluid dynamics modeling tool based on ANSYS CFX has been developed to analyze the microfluidic domain of fluid channels inside the nozzle. The simulations on the extrusion and encapsulation process of bio-inks have been conducted. Based on the response surface method, the simulation work has established an equation to predict the volume fraction of the encapsulating layer against a variety of influencing factors including the size of extrusion nozzle, pneumatic pressure condition and the dynamic viscosity of the bio-ink. This equation has been used to recommend optimal solutions of printing parameters for the CAU bio-printer, which is expected to improve the quality of bio-printed tubular structure with an encapsulation.
16 May 2024 in Journal of Intelligent Material Systems and Structures
High-speed on/off valve acts as critical enabling component of digital hydraulics, which has been challenging the traditional hydraulic system by providing efficient and effective hydraulic control solutions. The high-speed on/off valve that ideally fits the digital hydraulic system is expected to achieve fast response and long stroke with affordable energy consumption. This not only requires developing advanced actuation mechanism but also demands extensive study on the driving strategy. This study focuses on investigating the Peak-and-hold driving strategy applied to a novel high speed on/off valve-energy coupling actuated valve (ECAV), in order to achieve target performance with optimized energy consumptions. This work has developed an electro-mechanical coupled physics model based on commercial finite element solver COMSOL. This model helps to investigate the performance of ECAV under different peak-and-hold driving parameters and thereby recommend the optimal peak-and-hold driving strategy. Then, the experimental testing on the prototype ECAV has been conducted to validate the simulated performances. The measurement results showed that the prototype ECA using the optimal peak & hold solution demonstrated significant advantage in energy saving targeting at response of 10 ms for 1.5 mm stroke, especially compared to a typical step input signal.
The development digital hydraulics demands higher performance on high-speed on/off valves. In order to fully exploit the energy saving advantages of digital hydraulics, advanced high-speed valves are expected to possess a fast response and a large nominal flow rate simultaneously. Energy-coupled-actuator (ECA) utilizes the shear working mode of magnetic rheological fluid to achieve reciprocating motion of the valve spool through the coupling/decoupling of a pair of disks and a translational piece and its driving force is not affected by the valve spool’s position. The reported advantages of ECA meets the design requirements of actuators for high-speed on/off valve. This study gives the detailed design proposal of high-speed valve based on ECA (ECAV). The work also established a multi-physics coupled model for ECAV, calculated the key parameters of the valve driving system, and predicted the switching performance of ECAV. Finally, a prototype of ECAV with updated sealing solution between the actuator and valve block was fabricated and experimental tested. The results indicate that for current ECAV prototype successfully established 40 l min−1@5 bar (1.5 mm stroke) using response time less than 7 ms. Moreover, the prototype only consumed 14 ms to reach a long stroke of 5 mm with a significantly increased ratio of stroke over response time.