The volatile organic compounds (VOCs) released from a plastic track can cause stimulation and damage to the human body; the temperature, relative humidity (RH) and air exchange rate (AER) have a significant impact on the release of VOCs from materials. In this study, we used a 0.1 m3 environmental chamber; a qualitative and quantitative analysis of VOCs released from a plastic track was conducted by gas chromatography-mass spectrometry with a temperature range of 23–60 °C, RH of 5–65% and AER of 0.5–1.5 h−1. The formation rate, the speciation, the nature of the main compounds and the mass concentration of VOCs under different environmental conditions were determined. It is shown that with the increase of temperature, the concentration of some main VOCs gradually increased and the Calkane and Coxygenated organic compounds were larger by 736.13 μg·m−3 and 984.22 μg·m−3 at 60 °C, respectively. Additionally, with the increase of RH, the concentration of different VOCs gradually increased. Nonetheless, the change in RH had no effect on the concentration percentage of different VOCs in the total VOC. With the increase in AER, the concentration of different main VOCs significantly declined, as did the VOC detection rate. When the AER was increased from 0.5 h−1 to 1.5 h−1, the Calkane decreased by 206.74–254.21 μg·m−3 and Coxygenated organic compounds decreased by 73.06–241.82 μg·m−3, and the number of non-detected VOC monomers increased from 1 to 7–12 species. The conclusion is that the increase in temperature and RH can promote the emission of VOCs from a plastic track, while increasing AER significantly reduces the concentrations of VOCs. Environmental temperature mainly causes the changes in the concentrations of different VOCs, and RH is a main factor leading to the variation in the detection rate of main VOCs. Overall, the release of VOCs from a plastic track is affected by environmental temperature, AER and RH in sequence. Through this paper, we clarify the effects of ambient temperature, RH and AER on the emission of VOCs from a plastic track, and furthermore, we determine the release characteristics of plastic track VOCs.
15 August 2019 in Polymers for Advanced Technologies
The study employs the shearstress transport (SST) turbulence model within a computational fluid dynamics (CFD) framework to investigate the influence of skijumping suit surface roughness on aerodynamic performance during the in-run phase. A three-dimensional multi-body model of the athlete–ski system is constructed to access variations in aerodynamic drag, moments, and flowfield characteristics under different surface roughness conditions. The results show that surface roughness has a significant effect on pressure drag, influencing both the total aerodynamic drag and the generation of pitching and rolling moments. While a surface roughness of 17.036\(\upmu {\rm m}\) yields the lowest total drag, it doesn’t correspond to minimal moments, indicating a trade-off between drag reduction and aerodynamic stability. Flow field analysis reveals that moderate surface roughness promotes earlier boundary-layer transition and delays flow separation, thereby enhancing aerodynamic efficiency. These findings highlight the importance of balancing drag minimization and stability control in suit design. The study provides theoretical basis for material selection and performance-driven customization of ski-jumping suits, with implications for the development of optimized apparel for elite athletes.
The athletics track consists of multiple organic hydrocarbons and their derivatives, which are easy to release TVOC under specific conditions such as high temperature. Taking polyurethane athletics track as the research object, the TVOC release of an athletics track is carried out in a 0.1 m3 environmental chamber, and TVOC mass concentration detection is performed using a TVOC gas detector. The results show that the increase in ambient temperature will promote the release of VOCs from a PU athletics track, and the increase rate and decline rate of TVOC mass concentration will increase with the increase in ambient temperature. The increase in ambient temperature will result in a significant shortening of the rapid release of VOCs released from a PU athletics track and a prolonged slow-release period. The ambient temperature rises, the maximum and 24 h value of TVOC mass concentration of the PU athletics track are steadily increasing, and this trend is more significant in the high-temperature section. The research conclusions can provide a basis for the improvement of athletics tracks.
14 December 2015 in Materials Research Innovations
The use of polyurethane materials in the external strengthening of the sports venues has increased because of their mechanical properties and ease of application. The major problems found with the polyurethane sports venues are the crack failure of the surface layer. In the study, the effects of different adhesive condition and base layer materials on the surface damage of the polyurethane sports venues were evaluated using the finite element method. The effect of this damage was analysed by evaluating the stress-intensity factor at the tip of the first crack. The results showed that when the first crack of the top layer in the polyurethane sports venues has appeared, it will hardly affect the damage expansion of the surface material whether the structural bonding layer between the top and base layer is continuous. The base layer's materials play an important role in the damage level of the surface layer.