LiDAR-derived digital elevation models can reveal road networks located beneath dense forest canopy. This study tests the accuracy of forest road characteristics mapped using LiDAR in the Santa Cruz Mountains, CA. The position, gradient, and total length of a forest haul road were accurately extracted using a 1 m DEM. In comparison to a field-surveyed centerline, the LiDAR-derived road exhibited a positional accuracy of 1.5 m, road grade measurements within 0.53% mean absolute difference, and total road length within 0.2% of the field-surveyed length. Airborne LiDAR can provide thorough and accurate road inventory data to support forest management and watershed assessment activities.
2 January 2014 in Journal of Map & Geography Libraries
Aerial and satellite imagery are widely used to assess the severity and impact of wildfires. Light detection and ranging (LiDAR) is a newer remote sensing technology that has demonstrated utility in measuring vegetation structure. Combined use of imagery and LiDAR may improve the assessment of wildfire impacts compared to imagery alone. Estimation of tree mortality at the plot scale could serve for more rapid, broad-scale, and lower cost post-fire assessments than feasible through field assessment. We assessed the accuracy of classifying color-infrared imagery in combination with post-fire LiDAR, and with differenced (pre- and post-fire) LiDAR, in estimating plot percent mortality in a second-growth coast redwood forest near Santa Cruz, CA. Percent mortality of trees greater than 25.4 cm DBH in 47 permanent 0.08 ha plots was categorized as low (50%). The model using Normalized Difference Vegetation Index (NDVI) from National Agricultural Imagery Program (NAIP) was 74% accurate; the model using NDVI and post-fire LiDAR was 85% accurate, while the model using NDVI and differenced LiDAR was 83% accurate. The addition of post-fire LiDAR data provided a modest increase in accuracy compared to imagery alone, which may not justify the substantial cost of data acquisition. The method demonstrated could be applied to rapidly estimate tree mortality resulting from wildfires at fine to moderate scale.
Island foxes (Urocyon littoralis) are listed as federally endangered on four of the six California Channel Islands to which they are endemic. The population on Santa Rosa Island declined by 99% during the 1990s due to golden eagle (Aguila chrysaetos) predation but is now recovering. This drastic population reduction provided an unprecedented opportunity to study home-range size and habitat use at very low levels of intraspecific competition. We used global positioning system (GPS) collars to track 14 adult male foxes from September 2009 through June 2010. On average, the collars operated for 16.5 wk, yielding 364 locations per fox. The 95% minimum convex polygon home ranges averaged 3.39 km2, which is several times larger than reported in previous studies conducted at higher population densities. We used Euclidean distance analysis to assess habitat selection within 95% kernel density isopleth (KDI) home ranges and 50% KDI core areas. The foxes used most of the available vegetation types but exhi... Resumen Los zorros isleños (Urocyon littoralis) se encuentran en la lista federal de especies con peligro de extinción y son endémicos en cuatro de las seis Channel Islands de California. La población de la isla de Santa Rosa disminuyó un 99% durante la década de los 1990 debido a la depredación por águilas reales (Aguila chrysaetos), pero ésta ya se está recuperando. Esta reducción drástica de la población nos proporcionó una oportunidad sin precedentes para estudiar el tamaño del rango de hogar y uso de hábitat a niveles muy bajos de competencia intra-específica. Utilizamos collares GPS para rastrear a 14 zorros adultos machos desde septiembre del 2009 hasta junio del 2010. En promedio, los collares operaron durante 16.5 semanas, produciendo 364 ubicaciones por zorro. Los estimados promedio del tamaño del rango de hogar basados en el método del polígono convexo mínimo del 95% fueron de 3.39 km2, que es varias veces mayor que el reportado en estudios previos llevados a cabo en densidades poblacionales má...
Forest roads and stream channels are mapped using a variety of remote sensing and ground-based techniques. In densely forested areas, conventional remote sensing methods provide limited terrain information, while ground-based surveys can be time-consuming, difficult, and expensive. Light Detection and Ranging (LiDAR) is an airborne remote sensing technology used to create high-resolution digital elevation models (DEMs) of the earth’s surface. This study tests the accuracy of forest road and stream channel features mapped using LiDAR in the steep, forested terrain of California’s Santa Cruz Mountains. A conventional total station survey was used to determine centerline position and elevations along a four-kilometer forest road, and along six thirty-meter stream channel study reaches. A 1.5 m LiDAR DEM was suitable to accurately map the location of the forest road and channel features. Ninety five percent of the LiDAR-derived road length was located within 2.2 m normal to the field-surveyed centerline and LiDAR-derived road slopes were not significantly different from field-surveyed slopes. Stream channel features derived from the LIDAR DEM were located within 2.7 m normal to the field-surveyed thalweg, while the LiDAR-derived slopes measured within 0.49 percent of field-surveyed slopes. These findings indicate that LiDAR can provide accurate terrain measurements that are suitable for resource management and assessment.