Traceability is considered a promising solution for product safety. However, the data in the traceability system is only a claim rather than a fact. Therefore, the quality and safety of the product cannot be guaranteed since we cannot ensure the authenticity of products (aka counterfeit detection) in the real world. In this paper, we focus on counterfeit detection for the traceability system. The risk of counterfeiting throughout a typical product life cycle in the supply chain is analyzed, and the corresponding requirements for the tags, packages, and traceability system are given to eliminate these risks. Based on the analysis, an anti-counterfeiting architecture for traceability system based on two-level quick response codes (2LQR codes) is proposed, where the problem of counterfeit detection for a product is transformed into the problem of copy detection for the 2LQR code tag. According to the characteristics of the traceability system, the generation progress of the 2LQR code is modified, and there is a corresponding improved algorithm to estimate the actual location of patterns in the scanned image of the modified 2LQR code tag to improve the performance of copy detection. A prototype system based on the proposed architecture is implemented, where the consumers can perform traceability information queries by scanning the 2LQR code on the product package with any QR code reader. They can also scan the 2LQR code with a home-scanner or office-scanner, and send the scanned image to the system to perform counterfeit detection. Compared with other anti-counterfeiting solutions, the proposed architecture has advantages of low cost, generality, and good performance. Therefore, it is a promising solution to replace the existing anti-counterfeiting system.

With the development of the Internet of Things (IoT) technology, two-dimensional (2D) barcodes are widely used in smart IoT applications as a perception portal. In industries with many circulations and testing links like traceability, since the existing 2D barcode cannot be changed once it is printed, it can only be replaced with more expensive radio frequency identification (RFID) labels or new 2D barcodes, causing a waste of human resources and costs. For better circulation efficiency and resource utilization, we propose a new design of the rewritable and sustainable 2D barcode based on the fault-tolerance mechanism. The ability to add new information in the 2D barcode can be achieved through data encryption and the insertion of a rewritable layer. It means the message of 2D barcodes could be changed, and increases the flexibility and liquidity of the 2D barcode application. Besides, the encoding and decoding method of the proposed 2D barcode is presented. Experimental results have illustrated the superiority of rewritable and sustainable 2D barcodes in the traceability of herbal medicine compared with the conventional 2D barcodes, and demonstrated the feasibility of the design. The findings show the potential for significant application in the field of traceability in smart IoT, as well as in the manufacturing industry and logistics.

In recent years, the application of two-dimensional (2D) barcode is more and more extensive and has been used as landmarks for robots to detect and peruse the information. However, it is hard to obtain a sharp 2D barcode image because of the moving robot, and the common solution is to deblur the blurry image before decoding the barcode. Image deblurring is an ill-posed problem, where ringing artifacts are commonly presented in the deblurred image, which causes the increase of decoding time and the limited improvement of decoding accuracy. In this article, a novel approach is proposed using blur-invariant shape and geometric features to make a blur-readable (BR) 2D barcode, which can be directly decoded even when seriously blurred. The finder patterns of BR code consist of two concentric rings and five disjoint disks, whose centroids form two triangles. The outer edges of the concentric rings can be regarded as blur-invariant shapes, which enable BR code to be quickly located even in a blurred image. The inner angles of the triangle are of blur-invariant geometric features, which can be used to store the format information of BR code. When suffering from severe defocus blur, the BR code can not only reduce the decoding time by skipping the deblurring process but also improve the decoding accuracy. With the defocus blur described by circular disk point-spread function, simulation results verify the performance of blur-invariant shape and the performance of BR code under blurred image situation.

The range of light illumination in real scenes is very large, and ordinary cameras can only record a small part of this range, which is far lower than the range of human eyes’ perception of light. High-dynamic range (HDR) imaging technology that has appeared in recent years can record a wider range of illumination than the perceptual range of the human eye. However, the current mainstream HDR imaging technology is to capture multiple low-dynamic range (LDR) images of the same scene with different exposures and then merge them into one HDR image, which greatly increases the amount of data captured. The advent of single-pixel cameras (compressive imaging system) has proved the feasibility of obtaining and restoring image data based on compressive sensing. Therefore, this paper proposes a method for reduced-dimensional capture of high dynamic range images with compressive sensing, which includes algorithms for front end (capturing) and back end (processing). At the front end, the K-SVD dictionary is used to compressive sensing the input multiple-exposure image sequence, thereby reducing the amount of data transmitted to the back end. At the back end, the Orthogonal Matching Pursuit (OMP) algorithm is used to reconstruct the input multiple-exposure image sequence. A low-rank PatchMatch algorithm is proposed to merge the reconstructed image sequence to obtain an HDR image. Simulation results show that, under the premise of reducing the complexity of the front-end equipment and the amount of communication data between the front end and the back end, the overall system achieves a good balance between the amount of calculation and the quality of the HDR image obtained.

The popular use of high quality printing and scanning equipment makes it easier to counterfeit important printed matter, such as important document, anti-counterfeit label on merchandise, packaging, etc. Previously, methods such as textured image, two-level quick response (2LQR) code, fractional-order spatial steganography, etc., have been used for printed matter authentication. In this paper, a simplified model is proposed to analyze the variation of the correlation of textured-patterns (hereinafter called patterns) after the print-and-scan (P&S) process, which gives accurate mathematical descriptions of the information loss during P&S processes. Based on previous theoretical results, we propose the two-stage textured-patterns embedded QR (2SQR) codes for printed matter authentication, which are based on 2LQR codes and sensitive to P&S process. In the generation process, the stage two (S2) patterns are introduced, which are the corresponding P&S version of the textures in the 2LQR codes, i.e., stage one (S1) patterns. Then part of the S1 patterns in 2LQR codes are replaced with the corresponding S2 patterns, resulting in the 2SQR codes. In the authentication process, the 2SQR indicator is used to eliminates the need for the original image, which eliminates the storage and retrieval process of the original images. Experiments show that, compared with the 2LQR codes, the 2SQR codes significantly improve the performance in distinguishing the authentic codes and their copied version.